sleepphone-cable-box: support trick, print orientation

[reprap-play.git] / sleepphone-cable-box.scad

diff --git a/sleepphone-cable-box.scad b/sleepphone-cable-box.scad
index b5bae407f73d4f787b1091bde9728cdc1c6f94e5..1fe2e98c8670f62ff8af90eac828cb6c3ed135af 100644 (file)
--- a/sleepphone-cable-box.scad
+++ b/sleepphone-cable-box.scad
@@ -9,6 +9,9 @@ phone = [ 76.40, 30.96, 6.00 ]; // includes socket
 phone_button_z = 6.58;
 minwall = 0.50;
 
+cutout_dia = 7;
+cutout_between = 5;
+
 button_dz = 1.35;
 
 button_dy_outer = 28.42;
@@ -127,10 +130,14 @@ module PlugKeeper(){
        PlugKeeperProfileHalf();
 
     }
+}
 
-  translate([0,0, -keeper_stalk_thick])
-    linear_extrude(height = keeper_stalk_thick)
-    PlugKeeperStalkProfile();
+module KeeperProjection(){
+  projection()
+    rotate([0,90,0])
+    linear_extrude(height= 20)
+    projection()
+    PlugKeeper();
 }
 
 module Box(){
@@ -140,16 +147,34 @@ module Box(){
     translate([ led[0], phone[1]/2 - led[1], 1 ])
       cylinder(r = led_dia/2, h= phone[2]*2, $fn=20);
 
-    for (ys=[-1,+1])
+    for (ys=[-1,+1]) {
       translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
        linear_extrude(height = wall[2]*3)
        PlugKeeperStalkProfile();
+
+      translate([ phone[0] + wall[0],
+                 ys * (cutout_between/2 + cutout_dia/2),
+                 -10 ])
+       cylinder( r= cutout_dia/2, h = 50, $fn = 20 );
+    }
   }
 
   PlugKeeper();
+
+  translate([0,0, -keeper_stalk_thick])
+    linear_extrude(height = keeper_stalk_thick)
+    PlugKeeperStalkProfile();
+}
+
+module BoxPrint(){
+  // This makes' Cura's support more optimal: specifically,
+  // it then doesn't seem to touch the back (bottom) wall
+  rotate([0,90,0])
+    Box();
 }
 
 //MainProfileInnerHalf();
 //MainProfile();
-Box();
-
+//KeeperProjection();
+//Box();
+BoxPrint();