sleepphone-cable-box: support trick, print orientation

[reprap-play.git] / sleepphone-cable-box.scad

diff --git a/sleepphone-cable-box.scad b/sleepphone-cable-box.scad
index 8c06fb69c60d87b86099931a091689235b166415..1fe2e98c8670f62ff8af90eac828cb6c3ed135af 100644 (file)
--- a/sleepphone-cable-box.scad
+++ b/sleepphone-cable-box.scad
@@ -9,7 +9,8 @@ phone = [ 76.40, 30.96, 6.00 ]; // includes socket
 phone_button_z = 6.58;
 minwall = 0.50;
 
-cutout_depth = 5;
+cutout_dia = 7;
+cutout_between = 5;
 
 button_dz = 1.35;
 
@@ -146,16 +147,16 @@ module Box(){
     translate([ led[0], phone[1]/2 - led[1], 1 ])
       cylinder(r = led_dia/2, h= phone[2]*2, $fn=20);
 
-    for (ys=[-1,+1])
+    for (ys=[-1,+1]) {
       translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
        linear_extrude(height = wall[2]*3)
        PlugKeeperStalkProfile();
 
-    translate([ phone[0] - cutout_depth,
-               0,
-               -10 ])
-      linear_extrude(height=50)
-      KeeperProjection();
+      translate([ phone[0] + wall[0],
+                 ys * (cutout_between/2 + cutout_dia/2),
+                 -10 ])
+       cylinder( r= cutout_dia/2, h = 50, $fn = 20 );
+    }
   }
 
   PlugKeeper();
@@ -165,8 +166,15 @@ module Box(){
     PlugKeeperStalkProfile();
 }
 
+module BoxPrint(){
+  // This makes' Cura's support more optimal: specifically,
+  // it then doesn't seem to touch the back (bottom) wall
+  rotate([0,90,0])
+    Box();
+}
+
 //MainProfileInnerHalf();
 //MainProfile();
 //KeeperProjection();
-Box();
-
+//Box();
+BoxPrint();