include <funcs.scad>
wall = 0.75 * [1,1,1];
+wall_bot = 1.0;
+
phone = [ 76.40, 30.96, 6.00 ]; // includes socket
phone_button_z = 6.58;
minwall = 0.50;
+cutout_dia = 7;
+cutout_between = 5;
+
button_dz = 1.35;
button_dy_outer = 28.42;
plug_maxw = 10.95 + 0.35;
plug_minw= 6.53 + 0.35;
plug_sllen= 6.50;
-plug_totlen = 84.90; // to maxw, including phone
+plug_totlen = 84.90 - 1.5; // to maxw, including phone
plug_h = 6.5;
plug_tooth_h = 0.5;
keeper_stalk_basewidth = 4;
keeper_stalk_len = 70;
keeper_stalk_gap = 2;
+keeper_stalk_thick = wall_bot;
// calculated
difference(){
for (m=[0,1]) mirror([m,0]) {
minkowski(){
- square(2 * [wall[1], wall[2]], center=true);
+ translate([ -wall[1], -wall_bot ])
+ square([ wall[1]*2, wall_bot + wall[2] ]);
MainProfileInnerHalf();
}
}
hull(){
for (m=[0,1]) mirror([0,m,0]) PlugKeeperProfileHalf();
translate([ plugkeeper_x_maxw + keeper_stalk_len, 0,0 ])
- square([ 0.1, keeper_stalk_basewidth/2 ], center=true);
+ square([ 0.1, keeper_stalk_basewidth ], center=true);
}
}
module PlugKeeper(){
for (m=[0,1]) mirror([0,m,0]) {
- translate([0,0, -wall[2]])
- linear_extrude(height=plug_h + wall[2])
+ translate([0,0, -keeper_stalk_thick])
+ linear_extrude(height=plug_h + keeper_stalk_thick)
PlugKeeperProfileHalf();
translate([0, 0, plug_h - plug_tooth_h])
PlugKeeperProfileHalf();
}
+}
- translate([0,0, -wall[2]])
- linear_extrude(height = wall[2])
- PlugKeeperStalkProfile();
+module KeeperProjection(){
+ projection()
+ rotate([0,90,0])
+ linear_extrude(height= 20)
+ projection()
+ PlugKeeper();
}
module Box(){
translate([ led[0], phone[1]/2 - led[1], 1 ])
cylinder(r = led_dia/2, h= phone[2]*2, $fn=20);
- for (ys=[-1,+1])
+ for (ys=[-1,+1]) {
translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
linear_extrude(height = wall[2]*3)
PlugKeeperStalkProfile();
+
+ translate([ phone[0] + wall[0],
+ ys * (cutout_between/2 + cutout_dia/2),
+ -10 ])
+ cylinder( r= cutout_dia/2, h = 50, $fn = 20 );
+ }
}
PlugKeeper();
+
+ translate([0,0, -keeper_stalk_thick])
+ linear_extrude(height = keeper_stalk_thick)
+ PlugKeeperStalkProfile();
}
-//MainProfileInner();
-Box();
+module BoxPrint(){
+ // This makes' Cura's support more optimal: specifically,
+ // it then doesn't seem to touch the back (bottom) wall
+ rotate([0,90,0])
+ Box();
+}
+//MainProfileInnerHalf();
+//MainProfile();
+//KeeperProjection();
+//Box();
+BoxPrint();