sewing-table: adjust tablet

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 2baad77a57b7ef1534d6ac73fb135e1a56087adb..ef02acce9b03446eb27084d004c42bd6bf7312e7 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -94,7 +94,7 @@ rearcurve_double_inrad = 26.10 + 8.04;
 
 reartablet_z = 2.54;
 reartablet_x = 5 + 1;
-reartablet_y = 5;
+reartablet_y = 8;
 
 frontcurve_side_skew = 3.5 / 72;
 frontcurve_avoid_y = 70;
@@ -422,8 +422,49 @@ module Machine_Profile(){
   }
 }
 
-module Machine_NewRearProfile(){ ////toplevel
-  import("sewing-table-rear-profile.dxf", convexity=10);
+module Machine_NewRearProfile(){
+  // figures copied out of xfig edit boxes
+  // best not to edit the posbox size if poss - just move it
+  posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green
+  sideline = -10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue
+  scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2
+  scaleline_mm = 12+5+10+5+3;
+  sh = -[abs(posbox[0]), abs(posbox[1])];
+  rot = atan2(-sideline[0], sideline[1]);
+  sc = scaleline_mm / scaleline;
+  echo("SH",sh,rot,sc);
+  scale(sc) rotate(rot) translate(sh){
+    import("sewing-table-rear-profile.dxf", convexity=10); // spline, Pink3
+  }
+}
+
+module Machine_NewRearCurve(){
+  slant = atan2(4,210-10);
+  echo("SL",slant);
+  translate([0,0, rearcurve_double_inrad]) rotate([slant,0,0]){
+    translate([ rearcurve_double_inrad, 0, 10 ]){
+      rotate([180,0,0]) rotate([0,0,90]) linear_extrude(height=30){
+       hull(){
+         Machine_NewRearProfile();
+         translate([0,-100]) Machine_NewRearProfile();
+       }
+      }
+    }
+    rotate([0,90,0]) rotate([90,0,0]) {
+      intersection(){
+       rotate_extrude(convexity=10, $fn=64)
+         rotate(90)
+         translate([ 0, -rearcurve_double_inrad ])
+         Machine_NewRearProfile();
+       translate([0,0,-500])
+         cube([500,500,1000]);
+      }
+    }
+    translate([1,0,-rearcurve_double_inrad])
+      rotate([0,-90,0]) rotate([0,0,-90])
+      linear_extrude(height= rearcurve_strt_len + 1)
+      Machine_NewRearProfile();
+  }
 }
 
 module Machine_RearProfile(){ ////toplevel
@@ -475,31 +516,7 @@ module Machine_Curves(){ ////toplevel
     translate([ rearcurve_strt_len,
                0,
                rearcurve_z_slop ]){
-      translate([ 1,
-                 0,
-                 0
-                 ]){
-       rotate([0,-90,0])rotate([0,0,-90]){
-         linear_extrude(height= rearcurve_strt_len + 1)
-         Machine_RearProfile();
-       }
-      }
-      translate([ 0,
-                 0,
-                 rearcurve_double_inrad ]) {
-       intersection(){
-         rotate([90,0,0]){
-           rotate_extrude(convexity=10, $fn=32) {
-             rotate([0,0,90]) translate([ 0,
-                         -rearcurve_double_inrad ]) {
-               Machine_RearProfile();
-             }
-           }
-         }
-         mirror([0,0,1])
-           translate([0,-75,0]) cube([150,150,150]);
-       }
-      }
+      Machine_NewRearCurve();
     }
   }
 }
@@ -718,4 +735,7 @@ module Demo(){ ////toplevel
 //Demo();
 
 //Machine_Profile();
-//Machine_RearProfile();
+//Machine_NewRearProfile();
+//Machine_NewRearCurve();
+//Machine_Curves();
+//Machine();