sewing-table: FitTest_PairLink: add bar_z_slop

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 64f144bce908fa5eec60b873cf500b54d725f599..c10695834b46eafe2772844501c4ee6be7fb3d51 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -489,6 +489,21 @@ module Machine_NewRearProfile(){
   }
 }
 
+module Machine_NewFrontProfile(){
+  // figures copied out of xfig edit boxes
+  // best not to edit the posbox size if poss - just move it
+  posbox = 10 * ([11.8022,8.0600] - [4.2044,19.1867]); // box, Green
+  refline = 10 * ([7.6778,16.7222] - [27.8689,17.6578]); // line, Blue
+  refline_mm = (11-1)*10;
+  sh = -[abs(posbox[0]), abs(posbox[1])];
+  rot = atan2(-refline[0], refline[1]);
+  sc = refline_mm / vectorlen2d(refline);
+  //echo("SH",sh,rot,sc);
+  mirror([1,0]) scale(sc) rotate(rot+90) translate(sh){
+    import("sewing-table-front-profile.dxf", convexity=10); // spline, Pink3
+  }
+}
+
 module Machine_NewRearCurve(){
   slant = atan2(4,210-10);
   //echo("SL",slant);
@@ -554,18 +569,15 @@ module Machine_Curves(){ ////toplevel
   translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len,
              cutout_tile11_y,
              frontcurve_z_slop ]){
-    translate([ 0, -first_front[0] , 0 ])
+    translate([0, -machine_rear_to_front, 0])
       multmatrix([[1, -frontcurve_side_skew, 0, 0],
                  [0,  1,   0, 0],
                  [0,  0,   1, 0],
                  [0,  0,   0, 1]])
-      translate([ 0, first_front[0] , 0 ])
-      mirror([1,0,0]){
-      rotate([0,-90,0])rotate([0,0,-90]){
-       linear_extrude(height= 200)
-         Machine_FrontProfile();
-      }
-    }
+      mirror([1,0,0]) rotate([0,-90,0])rotate([0,0,-90])
+      linear_extrude(height= 200)
+      Machine_NewFrontProfile();
+
     translate([ rearcurve_strt_len,
                0,
                rearcurve_z_slop ]){
@@ -610,35 +622,6 @@ module Rectangle_TileBase(c) { TileBase(c[0], c[2]); }
 
 function Posts_interpolate_one(c0,c1) = [c0, (c0+c1)/2, c1];
 
-module FitTest_general(c0,sz, dobrace=false){
-  c = Rectangle_corners(c0, sz);
-  brace = [7,7,9];
-  difference(){
-    union(){
-      Rectangle_TileBase(c);
-      if (dobrace) {
-       translate(concat(c0, [-brace[2] + 0.1])){
-         difference(){
-           cube(concat(sz,[brace[2]]) - [5,0,0]);
-           translate(brace + [0,0, -25])
-             cube(concat(sz, [50]) - brace*2 + [10,0,0]);
-         }
-       }
-      }
-      RoundEdge(R_EDGE(c,1));
-    }
-    Machine();
-  }
-}
-
-module FitTest_Entire(){ ////toplevel
-  FitTest_general([-40,-80], [275,180], dobrace=true);
-}
-
-module FitTest_RearCurve(){ ////toplevel
-  FitTest_general([110,0], [170,100]);
-}
-
 module Tile02(){ ////toplevel
   sz = [100,170];
   c0 = tile02_tr + -sz;
@@ -805,6 +788,35 @@ module Tile00(){ ////toplevel
   RoundCornerAdd(rc2);
 }
 
+module FitTest_general(c0,sz, dobrace=false){
+  c = Rectangle_corners(c0, sz);
+  brace = [7,7,9];
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      if (dobrace) {
+       translate(concat(c0, [-brace[2] + 0.1])){
+         difference(){
+           cube(concat(sz,[brace[2]]) - [5,0,0]);
+           translate(brace + [0,0, -25])
+             cube(concat(sz, [50]) - brace*2 + [10,0,0]);
+         }
+       }
+      }
+      RoundEdge(R_EDGE(c,1));
+    }
+    Machine();
+  }
+}
+
+module FitTest_Entire(){ ////toplevel
+  FitTest_general([-40,-80], [275,180], dobrace=true);
+}
+
+module FitTest_RearCurve(){ ////toplevel
+  FitTest_general([110,0], [170,100]);
+}
+
 module FitTest_FrontCurve(){ ////toplevel
   p0 = [110,-80];
   sz = [170,80];
@@ -816,6 +828,75 @@ module FitTest_FrontCurve(){ ////toplevel
   }
 }
 
+module FitTest_PairLink(cut=false){ ////toplevel
+  cy0=-55; cy1=85; cx=127;
+  bar = [10,10];
+  legrad = 12;
+  footrad_min = 1; footrad_max = 4; footrad_depth = 5;
+  strap = [3,5];
+  adj_neg_slop = 1.0;
+  bar_z_slop = 1.75;
+
+  // calculated
+  straphole_x_max = legrad/sqrt(2) + footrad_max;
+  dz = cut ? adj_neg_slop : 0;
+
+  translate([cx - bar[0]/2, cy0, dz + bar_z_slop])
+    cube([bar[0], cy1-cy0, bar[1] - bar_z_slop]);
+
+  for (endy=[cy0,cy1]) {
+    $fn=32;
+    translate([cx,endy,dz]){
+      // feet
+      for (rot=[45:90:315]) rotate(rot) {
+       translate([legrad,0,0]){
+         hull(){
+           cylinder(r= footrad_max, h=1);
+           translate([0,0,-footrad_depth])
+             cylinder(r= footrad_min, h=1);
+         }
+       }
+      }
+      // legs
+      for (rot=[45,135]) rotate(rot) {
+       hull(){
+         for (s=[-1,+1]){
+           translate([s*legrad,0,0])
+             cylinder(r= footrad_max, h=bar[1]);
+         }
+       }
+      }
+      // strap holes
+      if (cut) {
+       for (rot=[0,180]) rotate(rot) {
+           translate([ straphole_x_max - strap[0]/2, 0,0 ])
+             cube(concat(strap,[20]), center=true);
+         }
+      }
+    }
+  }
+}
+
+module FitTest_PairDemo(){ ////toplevel
+  sh=[-100,-15,0];
+  translate(sh){
+    FitTest_PairLink();
+    %FitTest_FrontCurve();
+    %FitTest_RearCurve();
+  }
+  rotate([0,0,180]){
+    translate(sh){
+      difference(){
+       union(){
+         FitTest_FrontCurve();
+         FitTest_RearCurve();
+       }
+       #FitTest_PairLink(true);
+      }
+    }
+  }
+}
+
 module RoundCornerDemo_plat(cnr){
   mirror([0,0,1]) linear_extrude(height=1) polygon(cnr);
 }
@@ -850,6 +931,7 @@ module Demo(){ ////toplevel
 //Machine_Profile();
 //Machine_NewRearProfile();
 //Machine_NewRearCurve();
+//Machine_NewFrontProfile();
 //Machine_Curves();
 //Machine();
 //FitTest();