ksafe-base: fix a measurement

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 71281d627327bf697e3a7ae7497a430b00600e48..b71e04110cc327b69d281f314d33d066402a0221 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -14,7 +14,7 @@ post_dia = 8;
 
 post_shorter = 1;
 
-screw_dia = 2.2;
+$screw_dia = 3.2;
 screw_big_dia = 3.6;
 screw_big_len = 4.0;
 
@@ -30,14 +30,19 @@ interlock_fine_lenslop = 1.0;
 
 demo_slop = 0.1;
 
-leg_height = 62;
+leg_height = 53.75 - 0.95;
 
 leg_hole_dia = 5 + 0.75;
 leg_big_dia = 37;
 leg_bot_dia = 15;
-leg_top_flat_z = 5;
+leg_top_flat_z = 2;
+leg_top_thick = 8;
 
-leg_fin_top_w = 5;
+leg_midspc_dia = 20;
+leg_bot_thick = 8;
+leg_bot_mid_dia = 12;
+
+leg_fin_top_w = 3;
 leg_fin_bot_w = 5;
 leg_fin_bot_rad = 30;
 leg_fin_bot_flat_z = 5;
@@ -46,6 +51,12 @@ leg_n_fins = 4;
 leg_n_tubules = 4;
 leg_tubule_dia = 4;
 
+// spacer
+
+spacer_ext_slop = 0.25;
+spacer_int_slop = 0.25;
+spacer_height = 10;
+
 // cutout
 
 machine_rear_to_front = 84 + 0.25 - 1.4;
@@ -146,7 +157,7 @@ module Post(){
        cylinder(r= post_dia/2, h= tile_th + ply_th - post_shorter);
        translate([0,0, tile_th]) {
          cylinder(r= screw_big_dia/2, h= screw_big_len);
-         cylinder(r= screw_dia/2, h= ply_th, $fn=20);
+         cylinder(r= $screw_dia/2, h= ply_th, $fn=20);
        }
       }
     }
@@ -478,6 +489,35 @@ module TestDemo(){ ////toplevel
     TestPiece2();
 }
 
+module PostTestPiece(){ ////toplevel
+  hole_sizes = [2.8, 3.0, 3.1, 3.134, 3.168, 3.2, 3.3, 3.5];
+  nholes = len(hole_sizes)*2;
+  nrows = 4;
+  stride = post_dia*1.5;
+  rect_sz = stride * [ nrows,
+                      ceil(nholes/nrows) ];
+  corners = Rectangle_corners(-stride * 0.5 * [1,1], rect_sz);
+  difference(){
+    union(){
+      TileBase(corners[0], corners[2]);
+      RoundEdge(corners[0], corners[1]);
+      for (i= [ 0: nholes-1 ]) {
+       $screw_dia = hole_sizes[ floor(i/2) ];
+       translate(stride * [ (nrows-1) - (i % nrows),
+                            floor(i / nrows),
+                            0
+                            ]) {
+         Posts([[0,0]]);
+         color("blue")
+           mirror([0,0,1])
+           translate([post_dia/2, -post_dia/2, 1])
+           cube([1, post_dia * (i / nholes), tile_th]);
+       }
+      }
+    }
+  }
+}
+
 module Machine_NewRearProfile(){
   // figures copied out of xfig edit boxes
   // best not to edit the posbox size if poss - just move it
@@ -668,6 +708,17 @@ module TestStrapPeg_Long(){ ////toplevel
   TestStrapPeg_any(60);
 }
 
+module PostSpacer(){ ////toplevel
+  $fn = 50;
+  difference(){
+    cylinder(r= ply_hole_dia_real/2 - spacer_ext_slop,
+            h= spacer_height);
+    translate([0,0,-1])
+      cylinder(r= post_dia/2 + spacer_int_slop,
+              h= ply_th + 2);
+  }
+}
+
 module Machine(){ ////toplevel
   Machine_NewArm();
   Machine_Curves();
@@ -693,10 +744,13 @@ module Leg(){ ////toplevel
     union(){
       hull(){
        mirror([0,0,1])
-         cylinder(r= leg_big_dia/2, height=leg_top_flat_z, $fn=100);
-       translate([0,0, -leg_height])
+         cylinder(r= leg_big_dia/2, h=leg_top_flat_z, $fn=100);
+       translate([0,0, -leg_top_thick])
          cylinder(r= leg_bot_dia/2, height=1, $fn=100);
       }
+      if (!TEST)
+       translate([0,0,-leg_height])
+         cylinder(r= leg_bot_mid_dia/2, h=leg_bot_thick);
       for (rot=[0: 360/leg_n_fins : 359]) rotate(rot) {
          hull(){
            mirror([0,0,1]) translate([0, -leg_fin_top_w/2, 0])
@@ -712,11 +766,35 @@ module Leg(){ ////toplevel
        }
     }
     mirror([0,0,1]) translate([0,0,-1])
-      cylinder(r= leg_hole_dia/2, h=leg_height+2, $fn=30);
-    for (rot=[45: 360/leg_n_tubules : 359]) rotate(rot) {
-       mirror([0,0,1]) translate([ leg_tubule_pos_rad, 0, -1])
-         cylinder(r= leg_tubule_dia/2, h=leg_height+2, $fn=20);
+      cylinder(r= leg_hole_dia/2,
+              h= (!TEST ? leg_height+2 : leg_height/2),
+              $fn=30);
+    mirror([0,0,1]) translate([0,0,leg_top_thick - 0.1])
+      hull(){
+        cylinder(r= (!TEST ? leg_midspc_dia/2 : 0.1),
+                h= leg_height - leg_top_thick - leg_bot_thick + 0.2,
+                $fn=30);
+       if (TEST)
+         cylinder(r= leg_midspc_dia/2,
+                  h= leg_height - leg_top_thick - leg_bot_thick
+                     + (!TEST ? 0.2 : -leg_midspc_dia/2),
+                  $fn=30);
       }
+    cid_shear = (leg_fin_bot_w - leg_fin_top_w)/2 /
+                 (leg_height -leg_fin_bot_flat_z);
+    multmatrix([[ 1, 0, 0, leg_midspc_dia/2 ],
+                 [ 0, cid_shear,
+                         1, -leg_fin_bot_w/2 ],
+                 [ 0, 1, 0, -leg_height + leg_fin_bot_flat_z ],
+                 [ 0, 0, 0, 1 ]])
+      Commitid_BestCount([ leg_big_dia/2 - leg_midspc_dia/2,
+                            leg_height - leg_fin_bot_flat_z
+                             - leg_top_thick ]);
+    if (!TEST)
+      for (rot=[45: 360/leg_n_tubules : 359]) rotate(rot) {
+         mirror([0,0,1]) translate([ leg_tubule_pos_rad, 0, -1])
+           cylinder(r= leg_tubule_dia/2, h=leg_height+2, $fn=20);
+       }
   }
 }