sewing-table: make corners be cycles (nfc)

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 64867309c303d99de8260fa680cf5c390995ca78..b5ee987370ca4272e9687b97106b90797b7d8483 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -36,6 +36,10 @@ echo(str("HOLES IN PLY ctr dist from TILE ROUND edge = ",
         tile_hard_edge_hole_dist + round_edge_rad));
 
 thehd = [ tile_hard_edge_hole_dist, tile_hard_edge_hole_dist ];
+thehd_tr = thehd;
+thehd_tl = [ -thehd_tr[0], thehd_tr[1] ];
+thehd_bl = -thehd_tr;
+thehd_br = -thehd_tl;
 
 interlock_rad = interlock_dia/2;
 interlock_negative_rad = interlock_rad + 0.125;
@@ -59,9 +63,11 @@ module Posts(posts) {
   }
 }
 
-module TileBase(botleft_post, topright_post){
-  botleft = botleft_post - thehd;
-  size = topright_post - botleft_post + thehd * 2;
+module TileBase(botleft, topright){
+  size = topright - botleft;
+  botleft_post = botleft + thehd_tr;
+  topright_post = topright - thehd_bl;
+  echo(botleft_post, topright_post);
   difference(){
     mirror([0,0,1])
       translate(concat(botleft, [0]))
@@ -74,7 +80,7 @@ module TileBase(botleft_post, topright_post){
   }
 }
 
-m4_dnl  INREFFRAME(left_post, right_post, morevars) { body; }
+m4_dnl  INREFFRAME(left_cnr, right_cnr, morevars) { body; }
 m4_define(`INREFFRAME',`
   length_vec = ($2) - ($1);
   length = dist2d([0,0], length_vec);
@@ -88,27 +94,26 @@ m4_define(`INREFFRAME',`
   multmatrix(m)
 ')
 
-m4_dnl  INREFFRAME(left_post, right_post, morevars)
+m4_dnl  INREFFRAME(left_cnr, right_cnr, morevars)
 m4_dnl    INREFFRAME_EDGE { body; }
 m4_define(`INREFFRAME_EDGE',`
-  translate(concat(-thehd, [-round_edge_rad]))
+  translate([0,0, -round_edge_rad])
 ')
 
-module RoundEdge(left_post, right_post) {
-  INREFFRAME(left_post, right_post,
-             `tlength = length + thehd[0] * 2;') m4_dnl '
+module RoundEdge(left_cnr, right_cnr) {
+  INREFFRAME(left_cnr, right_cnr)
     INREFFRAME_EDGE {
     difference(){
       rotate([0,90,0])
-       cylinder(r= round_edge_rad, h= tlength, $fn=50);
+       cylinder(r= round_edge_rad, h= length, $fn=50);
       translate([-1, 0, -20])
-       cube([tlength+2, 20, 20]);
+       cube([length+2, 20, 20]);
     }
   }
 }
 
-module RoundLeftCorner(this_post, right_post) {
-  INREFFRAME(this_post, right_post) INREFFRAME_EDGE {
+module RoundLeftCorner(this_cnr, right_cnr) {
+  INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
     difference(){
       sphere(r= round_edge_rad, $fn=60);
       translate([0,0, -20])
@@ -117,60 +122,74 @@ module RoundLeftCorner(this_post, right_post) {
   }
 }
 
-module InterlockCore(r, plusth, ymir) {
+module InterlockPlan(r, ymir) {
   dx = sqrt(3) * r;
   $fn= 80;
-  translate([0, -thehd[1], plusth]){
+  translate([thehd[0], 0]){
     mirror([0,ymir,0]){
-      mirror([0,0,1]){
-       linear_extrude(height=tile_th+plusth*2, convexity=10){
-         circle(r=r);
-         difference(){
-           translate([-dx, -0.1])
-             square([ dx*2, r/2 + 0.1 ]);
-           for (xi = [-1, 1]) {
-             translate([ xi*dx, r ])
-               circle(r=r);
-           }
-         }
+      circle(r=r);
+      difference(){
+       translate([-dx, -0.1])
+         square([ dx*2, r/2 + 0.1 ]);
+       for (xi = [-1, 1]) {
+         translate([ xi*dx, r ])
+           circle(r=r);
        }
       }
     }
   }
 }
 
-module InterlockNegative(this_post, right_post) {
-  INREFFRAME(this_post, right_post)
+module InterlockCore(r, plusth, ymir) {
+  translate([0, 0, plusth]){
+    mirror([0,0,1]){
+      linear_extrude(height=tile_th+plusth*2, convexity=10){
+       InterlockPlan(r, ymir);
+      }
+    }
+  }
+}
+
+module InterlockNegative(this_cnr, right_cnr) {
+  INREFFRAME(this_cnr, right_cnr)
     InterlockCore(interlock_negative_rad, 1, 0);
 }
 
-module Interlock(this_post, right_post) {
-  INREFFRAME(this_post, right_post)
+module Interlock(this_cnr, right_cnr) {
+  INREFFRAME(this_cnr, right_cnr)
     InterlockCore(interlock_rad, 0, 1);
 }
 
+function TestPiece_holes2corners(holes) =
+  [ holes[0] + thehd_bl,
+    holes[1] + thehd_br,
+    holes[1] + thehd_tr,
+    holes[0] + thehd_tl ];
+
 module TestPiece1(){ ////toplevel
   holes = [ [-100, 0],
            [   0, 0]
            ];
+  corners = TestPiece_holes2corners(holes);
   difference(){
-    TileBase(holes[0], holes[1]);
-    InterlockNegative(holes[1], holes[1] + [0,1]);
+    TileBase(corners[0], corners[2]);
+    InterlockNegative(corners[1], corners[2]);
   }
   Posts(holes);
-  RoundEdge(holes[0], holes[1]);
-  RoundEdge(holes[0] + [ 0, 0.1 ], holes[0]);
-  RoundLeftCorner(holes[0], holes[1]);
+  RoundEdge(corners[0], corners[1]);
+  RoundEdge(corners[3], corners[0]);
+  RoundLeftCorner(corners[0], corners[1]);
 }
 
 module TestPiece2(){ ////toplevel
   holes = [ [   0, 0],
            [  50, 0]
            ];
-  TileBase(holes[0], holes[1]);
+  corners = TestPiece_holes2corners(holes);
+  TileBase(corners[0], corners[2]);
   Posts(holes);
-  RoundEdge(holes[0], holes[1]);
-  Interlock(holes[0], holes[0] + [0, -1]);
+  RoundEdge(corners[0], corners[1]);
+  Interlock(corners[3], corners[0]);
 }
 
 module Demo(){ ////toplevel