chiark / gitweb /
sewing-table: MachineRear: fixed too slow, other fixes
[reprap-play.git] / sewing-table.scad.m4
index fb8313c..b4ec954 100644 (file)
@@ -28,6 +28,36 @@ interlock_fine_lenslop = 1.0;
 
 demo_slop = 0.1;
 
+// cutout
+
+cutout_l_end_y_front_slop = 0.5;
+cutout_l_end_y_rear_slop = 0.5;
+cutout_l_end_x_slop = 0.25;
+
+cutout_l_end_x = 22;
+cutout_l_end_y = 85;
+cutout_l_end_curve = 1;
+cutout_l_end_y_total = cutout_l_end_y
+  + cutout_l_end_y_front_slop + cutout_l_end_y_rear_slop;
+
+tile01_tr = [250, 0];
+
+cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;
+cutout_tile11_x = cutout_l_end_x + cutout_l_end_curve;
+cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
+
+// rear curve
+
+rearedge_len = 170;
+
+rearcurve_rad = 25.4;
+rearcurve_strt_len = 65;
+rearcurve_total_len = 84;
+
+rearcurve_rad_slop = 0.5;
+
+rearcurve_avoid_y = rearcurve_rad + 10;
+
 // calculated
 
 TEST = false;
@@ -65,6 +95,13 @@ module Post(){
        cylinder(r= screw_dia/2, h= ply_th, $fn=20);
       }
     }
+    if (TEST) {
+      tsz = tile_hard_edge_hole_dist - test_edge + 1;
+      translate([0,0, tile_th/2]) {
+       cube([post_dia, tsz*2, tile_th], center=true);
+       cube([tsz*2, post_dia, tile_th], center=true);
+      }
+    }
   }
 }
 
@@ -83,11 +120,29 @@ module TileBase(botleft, topright){
     mirror([0,0,1])
       translate(concat(botleft, [0]))
       cube(concat(size, [tile_th]));
-    translate( concat(botleft_post, [ TEST ? 0 : -tile_th])
-              + 0.5 * [ post_dia, post_dia, 0 ] )
-      Commitid_BestCount_M( topright_post-botleft_post
-                           + [-post_dia,-post_dia]
-                           + [0, thehd[1]]);
+    if (!TEST) {
+      translate( concat(botleft_post, [ -tile_th ])
+                + 0.5 * [ post_dia, post_dia, 0 ] )
+       Commitid_BestCount_M( topright_post-botleft_post
+                             + [-post_dia,-post_dia]
+                             + [0, thehd[1]]);
+    }
+    if (TEST) {
+      translate( concat(botleft + [thehd[0], 0], [0]) )
+       Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+      difference(){
+       mirror([0,0,1]) {
+         translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
+           cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+         translate(concat(botleft_post, [-1]))
+           cube(concat(topright_post-botleft_post, [tile_th+2]));
+       }
+       minkowski(){
+         Machine();
+         cube(max(test_edge, tile_hard_edge_hole_dist)*2, center=true);
+       }
+      }
+    }
   }
 }
 
@@ -124,6 +179,8 @@ module RoundEdge(left_cnr, right_cnr) {
 }
 
 module RoundCornerCut(ci) {
+  // ci should be [this_cnr, right_cnr]
+  // where right_cnr is to the right (ie, anticlockwise)
   this_cnr = ci[0];
   right_cnr = ci[1];
   offr= round_cnr_rad - round_edge_rad;
@@ -239,6 +296,7 @@ module TestPiece1(){ ////toplevel
            [   0, 0]
            ];
   corners = TestPiece_holes2corners(holes);
+  rcs = [corners[0], corners[1]];
   difference(){
     union(){
       TileBase(corners[0], corners[2]);
@@ -247,9 +305,9 @@ module TestPiece1(){ ////toplevel
       RoundEdge(corners[3], corners[0]);
     }
     InterlockEdge(corners[1], corners[2], 1, nlobes=1);
-    RoundCornerCut(corners[0], corners[1]);
+    RoundCornerCut(rcs);
   }
-  RoundCornerAdd(corners[0], corners[1]);
+  RoundCornerAdd(rcs);
 }
 
 module TestPiece2(){ ////toplevel
@@ -270,8 +328,71 @@ module TestDemo(){ ////toplevel
   translate([ +thehd[0] + demo_slop, 0 ])
     TestPiece2();
 }
+
+module Machine_Arm(){
+  ysz = cutout_l_end_y_total;
+  // assume the round end is arc of a circle
+  chordlen = dist2d([0,0], [ cutout_l_end_y, cutout_l_end_curve ]);
+  endrad = cutout_l_end_y / cutout_l_end_curve * chordlen;
+  
+  translate([0,0,-30]) linear_extrude(height=60) {
+    translate(tile01_tr + [0, (-cutout_tile01_y + cutout_tile11_y)/2]) {
+      intersection(){
+       translate([-100, -ysz/2])
+         square([400, ysz]);
+       translate([ endrad - cutout_tile11_x - cutout_l_end_x_slop, 0 ])
+         circle(r=endrad, $fa=0.01,$fd=5);
+      }
+    }
+  }
+}
+
+module Machine_Rear(){
+  big_rad = rearcurve_total_len - rearcurve_strt_len + rearcurve_rad;
+  small_rad = rearcurve_rad + rearcurve_rad_slop;
+  translate([ 250 + rearedge_len - cutout_l_end_y + big_rad,
+             cutout_tile11_y,
+             0 ]){
+    translate([ 0,
+               0,
+               -rearcurve_rad
+               ]){
+      rotate([0,-90,0]){
+       rotate([0,0, 360/8/2])
+         cylinder(r = small_rad, h= rearcurve_strt_len);
+      }
+    }
+    translate([ 0,
+               0,
+               big_rad - rearcurve_rad ]) {
+      intersection(){
+       rotate([90,0,0]){
+         rotate_extrude(convexity=10) {
+           translate([ big_rad,
+                       0 ]) {
+             hull(){
+               circle(r= small_rad);
+               translate([200,0])
+                 circle(r= small_rad);
+             }
+           }
+         }
+       }
+       mirror([0,0,1])
+         cube([150,150,150]);
+      }
+    }
+  }
+}
+
+module Machine(){ ////toplevel
+  Machine_Arm();
+  Machine_Rear();
+}
   
 function Rectangle_corners(c0, sz) =
+  // returns the corners of a rectangle from c0 to c0+sz
+  // if sz is positive, the corners are anticlockwise starting with c0
   [ c0 + [ 0,     0     ],
     c0 + [ sz[0], 0     ],
     c0 + [ sz[0], sz[1] ],
@@ -283,21 +404,32 @@ function Rectangle_corners2posts(c) =
     c[2] + thehd_bl,
     c[3] + thehd_br ];
 
+module Rectangle_TileBase(c) { TileBase(c[0], c[2]); }
+
+function Posts_interpolate_one(c0,c1) = [c0, (c0+c1)/2, c1];
+
+m4_dnl   R_EDGE(c,ix)
+m4_dnl        c is from Rectangle_corners and
+m4_dnl        ix is a corner number
+m4_dnl    expands to two comma-separated corners:
+m4_dnl    that denoted by ix, and the next one anticlockwise
+m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]')
+
 module Tile02(){ ////toplevel
   sz = [100,170];
   c0 = -sz;
   c = Rectangle_corners(c0, sz);
   posts = Rectangle_corners2posts(c);
-  rcs = [c[0], c[1]];
+  rcs = [R_EDGE(c,0)];
   difference(){
     union(){
-      TileBase(c[0], c[2]);
+      Rectangle_TileBase(c);
       Posts(posts);
-      RoundEdge(c[0], c[1]);
-      RoundEdge(c[3], c[0]);
-      InterlockEdge(c[2], c[3], 0);
+      RoundEdge(R_EDGE(c,0));
+      RoundEdge(R_EDGE(c,3));
+      InterlockEdge(R_EDGE(c,2), 0);
     }
-    InterlockEdge(c[1], c[2], 1);
+    InterlockEdge(R_EDGE(c,1), 1);
     RoundCornerCut(rcs);
   }
   RoundCornerAdd(rcs);
@@ -308,23 +440,107 @@ module Tile12(){ ////toplevel
   c0 = [-sz[0], 0];
   c = Rectangle_corners(c0, sz);
   posts = Rectangle_corners2posts(c);
-  rcs = [c[2], c[3]];
+  rcs = [R_EDGE(c,3)];
   difference(){
     union(){
-      TileBase(c[0], c[2]);
-      RoundEdge(c[2], c[3]);
-      RoundEdge(c[3], c[0]);
+      Rectangle_TileBase(c);
       Posts(posts);
+      RoundEdge(R_EDGE(c,2));
+      RoundEdge(R_EDGE(c,3));
     }
-    InterlockEdge(c[0], c[1], 1);
+    InterlockEdge(R_EDGE(c,0), 1);
+    InterlockEdge(R_EDGE(c,1), 1);
     RoundCornerCut(rcs);
   }
   RoundCornerAdd(rcs);
 }
 
+tile_01_11_cnr = [250, 0] + [-cutout_tile11_x, 0];
+tile_11_10_cnr = [250, 0] + [0, cutout_tile11_y];
+
+module Tile11(){ ////toplevel
+  sz = [250,250];
+  c0 = [0,0];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  posts = concat(
+                Posts_interpolate_one(cnr_posts[0],
+                                      cnr_posts[1] - [cutout_tile11_x, 0]),
+                [ cnr_posts[1] + [0, cutout_tile11_y],
+                  cnr_posts[2],
+                  cnr_posts[3]
+                  ]);
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,2));
+      InterlockEdge(R_EDGE(c,3));
+    }
+    InterlockEdge(c[0], tile_01_11_cnr, 1);
+    InterlockEdge(tile_11_10_cnr, c[2], 1);
+    Machine();
+  }
+}    
+
+tile_01_00_cnr = [250, 0] + [0, -cutout_tile01_y];
+
+module Tile01(){ ////toplevel
+  sz = [250,170];
+  c0 = [0,-sz[1]];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  posts = concat(
+                Posts_interpolate_one(R_EDGE(cnr_posts,0)),
+                [ cnr_posts[2] + [0, -cutout_tile01_y] ],
+                Posts_interpolate_one(cnr_posts[2] - [cutout_tile11_x, 0],
+                                      cnr_posts[3])
+                );
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,0));
+      InterlockEdge(tile_01_11_cnr, c[3]);
+      InterlockEdge(R_EDGE(c,3));
+    }
+    InterlockEdge(c[1], tile_01_00_cnr, 1);
+    Machine();
+  }
+}    
+
+module Tile10(){ ////toplevel
+  sz = [250,250];
+  c0 = [sz[0],0];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  cty = cutout_tile11_y;
+  rcy = cty + rearcurve_avoid_y;
+  posts = [ cnr_posts[0] + [ 0,                              cty ],
+           cnr_posts[1] + [ -rearedge_len + cutout_l_end_x, rcy ],
+           cnr_posts[1] + [ 0,                              rcy ],
+           cnr_posts[2],
+           cnr_posts[3] ];
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,2));
+      //InterlockEdge(tile_01_11_cnr, c[3]);
+      //InterlockEdge(R_EDGE(c,3));
+    }
+    //InterlockEdge(c[1], tile_01_00_cnr, 1);
+    Machine();
+  }
+}
+
 module Demo(){ ////toplevel
   translate(demo_slop*[-2,1]) color("blue") Tile12();
   translate(demo_slop*[-2,0]) color("red")  Tile02();
+  translate(demo_slop*[-2,1]) color("orange") Tile11();
+  translate(demo_slop*[-2,0]) color("purple") Tile01();
+  translate(demo_slop*[-3,1]) color("blue")   Tile10();
+  %Machine();
 }
   
 //TestPiece1();