sewing-table: MachineRear: fixed too slow, other fixes

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 08d959ec40b049d1a3f88c59534b4a3225b3d72f..b4ec95486dd3a837aef686944e5b303e76b96ad6 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -34,6 +34,7 @@ cutout_l_end_y_front_slop = 0.5;
 cutout_l_end_y_rear_slop = 0.5;
 cutout_l_end_x_slop = 0.25;
 
 cutout_l_end_y_rear_slop = 0.5;
 cutout_l_end_x_slop = 0.25;
 

+cutout_l_end_x = 22;

 cutout_l_end_y = 85;
 cutout_l_end_curve = 1;
 cutout_l_end_y_total = cutout_l_end_y
 cutout_l_end_y = 85;
 cutout_l_end_curve = 1;
 cutout_l_end_y_total = cutout_l_end_y


@@ -42,9 +43,21 @@ cutout_l_end_y_total = cutout_l_end_y
 tile01_tr = [250, 0];
 
 cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;
 tile01_tr = [250, 0];
 
 cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;

-cutout_tile11_x = 22 + cutout_l_end_curve;
+cutout_tile11_x = cutout_l_end_x + cutout_l_end_curve;

 cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
 
 cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
 

+// rear curve
+
+rearedge_len = 170;
+
+rearcurve_rad = 25.4;
+rearcurve_strt_len = 65;
+rearcurve_total_len = 84;
+
+rearcurve_rad_slop = 0.5;
+
+rearcurve_avoid_y = rearcurve_rad + 10;
+

 // calculated
 
 TEST = false;
 // calculated
 
 TEST = false;


@@ -334,8 +347,47 @@ module Machine_Arm(){
   }
 }
 
   }
 }
 

-module Machine(){
+module Machine_Rear(){
+  big_rad = rearcurve_total_len - rearcurve_strt_len + rearcurve_rad;
+  small_rad = rearcurve_rad + rearcurve_rad_slop;
+  translate([ 250 + rearedge_len - cutout_l_end_y + big_rad,
+             cutout_tile11_y,
+             0 ]){
+    translate([ 0,
+               0,
+               -rearcurve_rad
+               ]){
+      rotate([0,-90,0]){
+       rotate([0,0, 360/8/2])
+         cylinder(r = small_rad, h= rearcurve_strt_len);
+      }
+    }
+    translate([ 0,
+               0,
+               big_rad - rearcurve_rad ]) {
+      intersection(){
+       rotate([90,0,0]){
+         rotate_extrude(convexity=10) {
+           translate([ big_rad,
+                       0 ]) {
+             hull(){
+               circle(r= small_rad);
+               translate([200,0])
+                 circle(r= small_rad);
+             }
+           }
+         }
+       }
+       mirror([0,0,1])
+         cube([150,150,150]);
+      }
+    }
+  }
+}
+
+module Machine(){ ////toplevel

   Machine_Arm();
   Machine_Arm();

+  Machine_Rear();

 }
   
 function Rectangle_corners(c0, sz) =
 }
   
 function Rectangle_corners(c0, sz) =


@@ -425,16 +477,69 @@ module Tile11(){ ////toplevel
       RoundEdge(R_EDGE(c,2));
       InterlockEdge(R_EDGE(c,3));
     }
       RoundEdge(R_EDGE(c,2));
       InterlockEdge(R_EDGE(c,3));
     }

-    Machine();

     InterlockEdge(c[0], tile_01_11_cnr, 1);
     InterlockEdge(tile_11_10_cnr, c[2], 1);
     InterlockEdge(c[0], tile_01_11_cnr, 1);
     InterlockEdge(tile_11_10_cnr, c[2], 1);

+    Machine();
+  }
+}    
+
+tile_01_00_cnr = [250, 0] + [0, -cutout_tile01_y];
+
+module Tile01(){ ////toplevel
+  sz = [250,170];
+  c0 = [0,-sz[1]];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  posts = concat(
+                Posts_interpolate_one(R_EDGE(cnr_posts,0)),
+                [ cnr_posts[2] + [0, -cutout_tile01_y] ],
+                Posts_interpolate_one(cnr_posts[2] - [cutout_tile11_x, 0],
+                                      cnr_posts[3])
+                );
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,0));
+      InterlockEdge(tile_01_11_cnr, c[3]);
+      InterlockEdge(R_EDGE(c,3));
+    }
+    InterlockEdge(c[1], tile_01_00_cnr, 1);
+    Machine();

   }
 }    
 
   }
 }    
 

+module Tile10(){ ////toplevel
+  sz = [250,250];
+  c0 = [sz[0],0];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  cty = cutout_tile11_y;
+  rcy = cty + rearcurve_avoid_y;
+  posts = [ cnr_posts[0] + [ 0,                              cty ],
+           cnr_posts[1] + [ -rearedge_len + cutout_l_end_x, rcy ],
+           cnr_posts[1] + [ 0,                              rcy ],
+           cnr_posts[2],
+           cnr_posts[3] ];
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,2));
+      //InterlockEdge(tile_01_11_cnr, c[3]);
+      //InterlockEdge(R_EDGE(c,3));
+    }
+    //InterlockEdge(c[1], tile_01_00_cnr, 1);
+    Machine();
+  }
+}
+

 module Demo(){ ////toplevel
   translate(demo_slop*[-2,1]) color("blue") Tile12();
   translate(demo_slop*[-2,0]) color("red")  Tile02();
   translate(demo_slop*[-2,1]) color("orange") Tile11();
 module Demo(){ ////toplevel
   translate(demo_slop*[-2,1]) color("blue") Tile12();
   translate(demo_slop*[-2,0]) color("red")  Tile02();
   translate(demo_slop*[-2,1]) color("orange") Tile11();

+  translate(demo_slop*[-2,0]) color("purple") Tile01();
+  translate(demo_slop*[-3,1]) color("blue")   Tile10();

   %Machine();
 }
   
   %Machine();
 }