sewing-table: RoundCorner rework: promote R_EDGE (nfc)

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 27fb69ccacfe6f147f4cb483cc898c8582d51fee..9a091699d37c244106368363f463faf8f903cd3c 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -205,6 +205,13 @@ module TileBase(botleft, topright){
   }
 }
 
+m4_dnl   R_EDGE(c,ix)
+m4_dnl        c is from Rectangle_corners and
+m4_dnl        ix is a corner number
+m4_dnl    expands to two comma-separated corners:
+m4_dnl    that denoted by ix, and the next one anticlockwise
+m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]')
+
 m4_dnl  INREFFRAME(left_cnr, right_cnr, morevars) { body; }
 m4_define(`INREFFRAME',`
   length_vec = ($2) - ($1);
@@ -237,38 +244,74 @@ module RoundEdge(left_cnr, right_cnr) {
   }
 }
 
-module RoundCornerCut(ci) {
-  // ci should be [this_cnr, right_cnr, left_cnr]
-  // where right_cnr is to the right (ie, anticlockwise)
+m4_define(`ROUNDCORNER_VARS',`
   this_cnr = ci[0];
   right_cnr = ci[1];
   left_cnr = ci[2];
-  offr= round_cnr_rad - round_edge_rad;
-  INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
-    difference(){
-      cube(offr*2 - 0.1, center=true);
-      translate([offr, offr, 0])
-       cylinder(center=true, h=20, r= offr);
+  bigr= round_cnr_rad - round_edge_rad;
+  l_uvec = unitvector2d(left_cnr - this_cnr);
+  r_uvec = unitvector2d(right_cnr - this_cnr);
+  lp1 = left_cnr  + clockwise2d(l_uvec) * bigr;
+  lp2 = this_cnr  + clockwise2d(l_uvec) * bigr;
+  lp3 = this_cnr  - clockwise2d(r_uvec) * bigr;
+  lp4 = right_cnr - clockwise2d(r_uvec) * bigr;
+  ctr = line_intersection_2d(lp1,lp2,lp3,lp4);
+  ctr3 = concat(ctr,[0])
+')
+
+module RoundCorner_selector(ci, adj) {
+  ROUNDCORNER_VARS;
+  echo("RCS",l_uvec,ctr);
+  %union(){
+    INREFFRAME(this_cnr, right_cnr) {
+      cube(bigr*2 + adj, center=true);
+    }
+  }
+  intersection(){
+    union(){
+      INREFFRAME(ctr3,concat(lp1,[4])){
+       translate([0,0,-bigr]) linear_extrude(height=bigr*2) {
+         translate([-bigr*2 + adj, -bigr])
+           square([bigr*2, bigr*3]);
+       }
+      }
+    }
+    union(){
+      INREFFRAME(ctr3,concat(lp4,[0])){
+       translate([0,0,-bigr]) linear_extrude(height=bigr*2) {
+         translate([-bigr*2, -bigr*2])
+           square([bigr*2 + adj, bigr*3]);
+       }
+      }
     }
   }
 }
 
+module RoundCornerCut(ci) {
+  // ci should be [this_cnr, right_cnr, left_cnr]
+  // where right_cnr is to the right (ie, anticlockwise)
+  ROUNDCORNER_VARS;
+  difference(){
+    RoundCorner_selector(ci, -0.1);
+    translate(ctr3)
+      cylinder(center=true, h=20, r= bigr);
+  }
+}
+
 module RoundCornerAdd(ci) {
-  this_cnr = ci[0];
-  right_cnr = ci[1];
-  left_cnr = ci[2];
-  bigr = round_cnr_rad - round_edge_rad;
-  INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
-    intersection(){
-      cube(bigr*2 + 0.1, center=true);
-      translate([bigr, bigr, 0])
+  ROUNDCORNER_VARS;
+  intersection(){
+    RoundCorner_selector(ci, +0.1);
+    INREFFRAME_EDGE {
+      translate(ctr3){
        rotate_extrude(convexity=10, $fn=50)
-       translate([bigr, 0])
-       difference(){
+         translate([bigr, 0])
+         difference(){
          circle(r= round_edge_rad, $fn=50);
          mirror([1,1])
            square([20,20]);
-        }
+       }
+      }
     }
   }
 }
@@ -567,13 +610,6 @@ module Rectangle_TileBase(c) { TileBase(c[0], c[2]); }
 
 function Posts_interpolate_one(c0,c1) = [c0, (c0+c1)/2, c1];
 
-m4_dnl   R_EDGE(c,ix)
-m4_dnl        c is from Rectangle_corners and
-m4_dnl        ix is a corner number
-m4_dnl    expands to two comma-separated corners:
-m4_dnl    that denoted by ix, and the next one anticlockwise
-m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]')
-
 module FitTest_general(c0,sz, dobrace=false){
   c = Rectangle_corners(c0, sz);
   brace = [7,7,9];
@@ -783,10 +819,11 @@ module RoundCornerDemo_plat(cnr){
 }
 
 module RoundCornerDemo(){ ////toplevel
-  cnr = [ [0,0], [15,0], [-10,10] ];
+  cnr = [ [0,0], [15,0], [-10,12] ];
   translate([0,25,0]) RoundCornerDemo_plat(cnr);
   translate([25,0,0]) RoundCornerAdd(cnr);
   translate([-25,0,0]) RoundCornerCut(cnr);
+  translate([0,-25,0]) RoundCorner_selector(cnr, 0);
   difference(){
     RoundCornerDemo_plat(cnr);
     RoundCornerCut(cnr);