sewing-table: Leg: wip new test

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index eacbc3d5484ebfddb9a3c95d8d9d36d1f6bdf015..91d4de9f58d6884f1a454a1683004b9b5059f292 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -35,13 +35,14 @@ leg_height = 62;
 leg_hole_dia = 5 + 0.75;
 leg_big_dia = 37;
 leg_bot_dia = 15;
-leg_top_flat_z = 5;
-leg_top_thick = 10;
+leg_top_flat_z = 2;
+leg_top_thick = 8;
 
 leg_midspc_dia = 20;
-leg_bot_thick = 10;
+leg_bot_thick = 8;
+leg_bot_mid_dia = 12;
 
-leg_fin_top_w = 5;
+leg_fin_top_w = 3;
 leg_fin_bot_w = 5;
 leg_fin_bot_rad = 30;
 leg_fin_bot_flat_z = 5;
@@ -697,10 +698,13 @@ module Leg(){ ////toplevel
     union(){
       hull(){
        mirror([0,0,1])
-         cylinder(r= leg_big_dia/2, height=leg_top_flat_z, $fn=100);
+         cylinder(r= leg_big_dia/2, h=leg_top_flat_z, $fn=100);
        translate([0,0, -leg_top_thick])
          cylinder(r= leg_bot_dia/2, height=1, $fn=100);
       }
+      if (!TEST)
+       translate([0,0,-leg_height])
+         cylinder(r= leg_bot_mid_dia/2, h=leg_bot_thick);
       for (rot=[0: 360/leg_n_fins : 359]) rotate(rot) {
          hull(){
            mirror([0,0,1]) translate([0, -leg_fin_top_w/2, 0])
@@ -716,10 +720,12 @@ module Leg(){ ////toplevel
        }
     }
     mirror([0,0,1]) translate([0,0,-1])
-      cylinder(r= leg_hole_dia/2, h=leg_height+2, $fn=30);
+      cylinder(r= leg_hole_dia/2,
+              h= (!TEST ? leg_height+2 : leg_height/2),
+              $fn=30);
     mirror([0,0,1]) translate([0,0,leg_top_thick - 0.1])
       cylinder(r= leg_midspc_dia/2,
-              h=leg_height - leg_top_thick - leg_bot_thick,
+              h=leg_height - leg_top_thick - leg_bot_thick + 0.2,
               $fn=30);
     for (rot=[45: 360/leg_n_tubules : 359]) rotate(rot) {
        mirror([0,0,1]) translate([ leg_tubule_pos_rad, 0, -1])