ply_hole_dia = 15;
ply_edge_min = 10;
+ply_hole_dia_real = 12;
+
tile_th = 3;
post_dia = 8;
cutout_l_end_y_front_slop = 0.5;
cutout_l_end_y_rear_slop = 0.5;
-cutout_l_end_x_slop = 0.25;
cutout_l_end_x = 22;
cutout_l_end_y = machine_rear_to_front;
-cutout_l_end_curve = 1;
cutout_l_end_new_x_slop = 1.4 - 1.95;
cutout_l_end_y_total = cutout_l_end_y
+ cutout_l_end_y_front_slop + cutout_l_end_y_rear_slop;
tile01_tr = [ 0, 0];
cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;
-cutout_tile11_x = cutout_l_end_x + cutout_l_end_curve;
cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
// front and rear curves
teststrap = [ 3, 5 ];
teststrap_peg = [7.5, 3.5];
+ply_edge_hole_dist_real = 14;
+
// calculated
TEST = false;
+JIG = false;
ply_edge_hole_dist = ply_edge_min + ply_hole_dia/2;
thehd_bl = -thehd_tr;
thehd_br = -thehd_tl;
-tablet_z_slop = 0.25;
+tablet_z_slop = 1.00;
interlock_rad = interlock_dia/2;
interlock_negative_rad = interlock_rad + 0.125;
module Post(){
mirror([0,0,1]) {
- difference(){
- cylinder(r= post_dia/2, h= tile_th + ply_th - post_shorter);
- translate([0,0, tile_th]) {
- cylinder(r= screw_big_dia/2, h= screw_big_len);
- cylinder(r= screw_dia/2, h= ply_th, $fn=20);
+ if (!JIG) {
+ difference(){
+ cylinder(r= post_dia/2, h= tile_th + ply_th - post_shorter);
+ translate([0,0, tile_th]) {
+ cylinder(r= screw_big_dia/2, h= screw_big_len);
+ cylinder(r= screw_dia/2, h= ply_th, $fn=20);
+ }
}
}
if (TEST) {
cube([POST_TCROSSSZ, post_dia, tile_th], center=true);
}
}
+ if (JIG) {
+ translate([0,0, tile_th/2]) {
+ cube([POST_TCROSSSZ, POST_TCROSSSZ, tile_th], center=true);
+ }
+ }
+ }
+}
+
+module PostHole(){
+ if (JIG) {
+ translate([0,0,-5])
+ cylinder(r= post_dia/2 + jig_post_hole_slop, h=10);
+ translate([0,0, -jig_min_th])
+ cylinder(r= ply_hole_dia_real/2, h = 5);
+ for (rot=[0:90:270]) rotate(rot) {
+ translate([ ply_edge_hole_dist_real, 0, 0 ])
+ cube([ jig_pencil_rad*2, jig_pencil_slotlen, 20 ], center=true);
+ }
}
}
Post();
}
}
+module PostHoles(posts) {
+ for (p= posts) {
+ translate(concat(p, [0]))
+ PostHole();
+ }
+}
module TileBase(botleft, topright){
size = topright - botleft;
mirror([0,0,1])
translate(concat(botleft, [0]))
cube(concat(size, [tile_th]));
- if (!TEST) {
+ if (!(TEST || JIG)) {
cidsz = topright_post-botleft_post
+ [-post_dia,-post_dia]
+ [0, thehd[1]];
+ 0.5 * concat( cidsz - cidszr, [ 0 ]) )
Commitid_BestCount_M(cidszr);
}
- if (TEST) {
+ if ((TEST || JIG)) {
crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2;
cidsz = [ thehd[0], size[1] - 2*crossoff ];
cidszr = [ cidsz[0], min(cidsz[1], 50) ];
- translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
- Commitid_BestCount(cidszr);
+ if (TEST)
+ translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
+ Commitid_BestCount(cidszr);
difference(){
mirror([0,0,1]) {
translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
- cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+ cube(concat(size - [test_edge,test_edge]*2, [tile_th*2]));
translate(concat(botleft_post, [-1]))
cube(concat(topright_post-botleft_post, [tile_th+2]));
}
MachineEnvelope();
cube(shufflesz, center=true);
}
+ if (JIG) {
+ translate([0,0,-20]) linear_extrude(height=20) {
+ for (diag=[[ +1, botleft ],
+ [ -1, [topright[0], botleft[1]] ]]) {
+ translate(diag[1])
+ rotate(atan2(size[1], diag[0] * size[0]))
+ translate([0, -test_edge/2])
+ square([vectorlen2d(size), test_edge]);
+ }
+ }
+ }
}
}
}
}
InterlockEdge(corners[1], corners[2], 1, nlobes=1);
RoundCornerCut(rcs);
+ PostHoles(holes);
}
RoundCornerAdd(rcs);
}
[ 50, 0]
];
corners = TestPiece_holes2corners(holes);
- TileBase(corners[0], corners[2]);
- Posts(holes);
- RoundEdge(corners[0], corners[1]);
- InterlockEdge(corners[3], corners[0], 0, nlobes=1);
+ difference(){
+ union(){
+ TileBase(corners[0], corners[2]);
+ Posts(holes);
+ RoundEdge(corners[0], corners[1]);
+ InterlockEdge(corners[3], corners[0], 0, nlobes=1);
+ }
+ PostHoles(holes);
+ }
}
module TestDemo(){ ////toplevel
TestPiece2();
}
-module Machine_Arm(){
- ysz = cutout_l_end_y_total;
- // assume the round end is arc of a circle
- chordlen = dist2d([0,0], [ cutout_l_end_y, cutout_l_end_curve ]);
- endrad = cutout_l_end_y / cutout_l_end_curve * chordlen;
-
- translate([0,0,-30]) linear_extrude(height=60) {
- translate(tile01_tr + [0, (-cutout_tile01_y + cutout_tile11_y)/2]) {
- intersection(){
- translate([-50, -ysz/2])
- square([400, ysz]);
- translate([ endrad - cutout_tile11_x - cutout_l_end_x_slop, 0 ])
- circle(r=endrad, $fa=0.01,$fd=5);
- }
- }
- }
-}
-
module Machine_NewRearProfile(){
// figures copied out of xfig edit boxes
// best not to edit the posbox size if poss - just move it
}
InterlockEdge(R_EDGE(c,1), 1);
RoundCornerCut(rcs);
+ PostHoles(posts);
}
RoundCornerAdd(rcs);
}
InterlockEdge(R_EDGE(c,0), 1);
InterlockEdge(R_EDGE(c,1), 1);
RoundCornerCut(rcs);
+ PostHoles(posts);
}
RoundCornerAdd(rcs);
}
}
InterlockEdge(c[0], tile_01_11_cnr, 1);
InterlockEdge(tile_11_10_cnr, c[2], 1);
+ PostHoles(posts);
Machine();
}
}
InterlockEdge(tile_01_11_cnr, c[3]);
InterlockEdge(R_EDGE(c,3));
}
+ PostHoles(posts);
InterlockEdge(c[1], tile_01_00_cnr, 1);
Machine();
}
RoundEdge(R_EDGE(c,2));
InterlockEdge(c[3], tile_11_10_cnr);
}
+ PostHoles(posts);
RoundCornerCut(rcs);
Machine();
}
rcy = cty + frontcurve_avoid_y;
posts = [ cnr_posts[0],
cnr_posts[1],
+ 0.5 * (cnr_posts[0] + cnr_posts[1]),
cnr_posts[2] + [ 0, -rcy ],
cnr_posts[2] + [ -sz[0] + frontedge_len - cutout_l_end_x, -cty ],
cnr_posts[3] + [ 0, -cty ]
RoundEdge(c1bis, c2bis);
}
Machine();
+ PostHoles(posts);
RoundCornerCut(rc2);
}
RoundCornerAdd(rcs);
}
module FitTest_EndEnd(){ ////toplevel
- p0 = [-32,-32];
- sz = [188,113];
- sz2 = [168,100];
+ p0 = [-30,-32];
+ sz = [156,81] - p0;
+ sz2 = [136,68] - p0;
difference(){
FitTest_general(p0, sz);
translate([ p0[0] -1, p0[1]+sz2[1], -10])
translate(demo_slop*[-3,1]) color("blue") Tile10();
translate(demo_slop*[-3,0]) color("red") Tile00();
%Machine();
+ // Can also do this, to print reference sheet:
+ // load this into openscad
+ // select Ctrl-4 view, view all, scale appropriately
+ // import sewing-table,Demo-flat.png
+ // pngtopnm <sewing-table,Demo-flat.png | ppmbrighten -s -50 -v +100 >t.pnm
+ // lpr t.pnm
}
//TestPiece1();
~ianmdlvl / reprap-play.git / blobdiff