chiark / gitweb /
sewing-table: TEST commitid: rotate so counter is in edgy bit
[reprap-play.git] / sewing-table.scad.m4
index af5c5bf..80d86c8 100644 (file)
@@ -97,6 +97,8 @@ reartablet_x = 5 + 1;
 reartablet_y = 5;
 
 frontcurve_side_skew = 3.5 / 72;
+frontcurve_avoid_y = 70;
+frontcurve_z_slop = 0.75;
 
 // calculated
 
@@ -128,6 +130,9 @@ interlock_sq_adj = 0.2; // arbitrary
 
 first_front = machine_front_profile[len(machine_front_profile)-1];
 
+m4_define(`POST_TCROSSSZ',
+          `2*( tile_hard_edge_hole_dist - test_edge + 1 )')
+
 module Post(){
   mirror([0,0,1]) {
     difference(){
@@ -138,10 +143,9 @@ module Post(){
       }
     }
     if (TEST) {
-      tsz = tile_hard_edge_hole_dist - test_edge + 1;
       translate([0,0, tile_th/2]) {
-       cube([post_dia, tsz*2, tile_th], center=true);
-       cube([tsz*2, post_dia, tile_th], center=true);
+       cube([post_dia,      POST_TCROSSSZ, tile_th], center=true);
+       cube([POST_TCROSSSZ, post_dia,      tile_th], center=true);
       }
     }
   }
@@ -170,8 +174,11 @@ module TileBase(botleft, topright){
                              + [0, thehd[1]]);
     }
     if (TEST) {
-      translate( concat(botleft + [thehd[0], 0], [0]) )
-       Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+      crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2;
+      cidsz = [ size[0] - 2*crossoff, thehd[1] ];
+      translate( concat(botleft + [crossoff, 0] + cidsz, [0]) )
+       rotate([0,0,180])
+       Commitid_BestCount(cidsz);
       difference(){
        mirror([0,0,1]) {
          translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
@@ -444,7 +451,7 @@ module Machine_Curves(){ ////toplevel
   }
   translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len,
              cutout_tile11_y,
-             0 ]){
+             frontcurve_z_slop ]){
     translate([ 0, -first_front[0] , 0 ])
       multmatrix([[1, -frontcurve_side_skew, 0, 0],
                  [0,  1,   0, 0],
@@ -620,7 +627,7 @@ module Tile10(){ ////toplevel
   cty = cutout_tile11_y;
   rcy = cty + rearcurve_avoid_y;
   posts = [ cnr_posts[0] + [ 0,                             cty ],
-           cnr_posts[1] + [ -sz[1] + rearedge_len - cutout_l_end_x, cty ],
+           cnr_posts[1] + [ -sz[0] + rearedge_len - cutout_l_end_x, cty ],
            cnr_posts[1] + [ 0,                             rcy ],
            cnr_posts[2],
            cnr_posts[3] ];
@@ -639,12 +646,41 @@ module Tile10(){ ////toplevel
   RoundCornerAdd(rcs);
 }
 
+module Tile00(){ ////toplevel
+  sz = [250,170];
+  c0 = tile01_tr + [0,-sz[1]];
+  c = Rectangle_corners(c0, sz);
+  cnr_posts = Rectangle_corners2posts(c);
+  cty = cutout_tile01_y;
+  rcy = cty + frontcurve_avoid_y;
+  posts = [ cnr_posts[0],
+           cnr_posts[1],
+           cnr_posts[2] + [ 0,                             -rcy ],
+           cnr_posts[2] + [ -sz[0] + rearedge_len - cutout_l_end_x, -cty ],
+           cnr_posts[3] + [ 0,                             -cty ]
+           ];
+  rcs = [R_EDGE(c,1)];
+  difference(){
+    union(){
+      Rectangle_TileBase(c);
+      Posts(posts);
+      RoundEdge(R_EDGE(c,0));
+      RoundEdge(R_EDGE(c,1));
+      InterlockEdge(tile_01_00_cnr, c[0]);
+    }
+    RoundCornerCut(rcs);
+    Machine();
+  }
+  RoundCornerAdd(rcs);
+}
+
 module Demo(){ ////toplevel
   translate(demo_slop*[-2,1]) color("blue") Tile12();
   translate(demo_slop*[-2,0]) color("red")  Tile02();
   translate(demo_slop*[-2,1]) color("orange") Tile11();
   translate(demo_slop*[-2,0]) color("purple") Tile01();
   translate(demo_slop*[-3,1]) color("blue")   Tile10();
+  translate(demo_slop*[-3,0]) color("red")    Tile00();
   %Machine();
 }