sewing-table: NewRearCurve: correct z

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index c12931527d4a0f24913686180946b2b4676eb62c..5935aaccd5e6848b84a641911b257fe4c70ea10a 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -422,7 +422,52 @@ module Machine_Profile(){
   }
 }
 
-module Machine_RearProfile(){
+module Machine_NewRearProfile(){
+  // figures copied out of xfig edit boxes
+  // best not to edit the posbox size if poss - just move it
+  posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green
+  sideline = -10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue
+  scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2
+  scaleline_mm = 12+5+10+5+3;
+  sh = -[abs(posbox[0]), abs(posbox[1])];
+  rot = atan2(-sideline[0], sideline[1]);
+  sc = scaleline_mm / scaleline;
+  echo("SH",sh,rot,sc);
+  scale(sc) rotate(rot) translate(sh){
+    import("sewing-table-rear-profile.dxf", convexity=10); // spline, Pink3
+  }
+}
+
+module Machine_NewRearCurve(){
+  slant = atan2(4,210-10);
+  echo("SL",slant);
+  translate([0,0, rearcurve_double_inrad]) rotate([slant,0,0]){
+    translate([ rearcurve_double_inrad, 0, 10 ]){
+      rotate([180,0,0]) rotate([0,0,90]) linear_extrude(height=30){
+       hull(){
+         Machine_NewRearProfile();
+         translate([0,-100]) Machine_NewRearProfile();
+       }
+      }
+    }
+    rotate([0,90,0]) rotate([90,0,0]) {
+      intersection(){
+       rotate_extrude(convexity=10, $fn=64)
+         rotate(90)
+         translate([ 0, -rearcurve_double_inrad ])
+         Machine_NewRearProfile();
+       translate([0,0,-500])
+         cube([500,500,1000]);
+      }
+    }
+    translate([1,0,-rearcurve_double_inrad])
+      rotate([0,-90,0]) rotate([0,0,-90])
+      linear_extrude(height= rearcurve_strt_len + 1)
+      Machine_NewRearProfile();
+  }
+}
+
+module Machine_RearProfile(){ ////toplevel
   intersection(){
     Machine_Profile();
     translate([ -200 + machine_rear_to_front/2, -100 ]) {
@@ -539,7 +584,7 @@ module FitTest(){ ////toplevel
     union(){
       Rectangle_TileBase(c);
       translate(concat(c0, [-brace[2] + 0.1])){
-       %difference(){
+       difference(){
          cube(concat(sz,[brace[2]]) - [5,0,0]);
          translate(brace + [0,0, -25])
            cube(concat(sz, [50]) - brace*2 + [10,0,0]);
@@ -714,4 +759,5 @@ module Demo(){ ////toplevel
 //Demo();
 
 //Machine_Profile();
-//Machine_RearProfile();
+//Machine_NewRearProfile();
+//Machine_NewRearCurve();