sewing-table: some comments (nfc)

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index fb8313c4305c4205d7c65c709c859b98790f0128..3b628e4b681bd7456ecc93699db15e9c150c8574 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -65,6 +65,13 @@ module Post(){
        cylinder(r= screw_dia/2, h= ply_th, $fn=20);
       }
     }
+    if (TEST) {
+      tsz = tile_hard_edge_hole_dist - test_edge + 1;
+      translate([0,0, tile_th/2]) {
+       cube([post_dia, tsz*2, tile_th], center=true);
+       cube([tsz*2, post_dia, tile_th], center=true);
+      }
+    }
   }
 }
 
@@ -83,11 +90,23 @@ module TileBase(botleft, topright){
     mirror([0,0,1])
       translate(concat(botleft, [0]))
       cube(concat(size, [tile_th]));
-    translate( concat(botleft_post, [ TEST ? 0 : -tile_th])
-              + 0.5 * [ post_dia, post_dia, 0 ] )
-      Commitid_BestCount_M( topright_post-botleft_post
-                           + [-post_dia,-post_dia]
-                           + [0, thehd[1]]);
+    if (!TEST) {
+      translate( concat(botleft_post, [ -tile_th ])
+                + 0.5 * [ post_dia, post_dia, 0 ] )
+       Commitid_BestCount_M( topright_post-botleft_post
+                             + [-post_dia,-post_dia]
+                             + [0, thehd[1]]);
+    }
+    if (TEST) {
+      translate( concat(botleft + [thehd[0], 0], [0]) )
+       Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+      mirror([0,0,1]) {
+       translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
+         cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+       translate(concat(botleft_post, [-1]))
+         cube(concat(topright_post-botleft_post, [tile_th+2]));
+      }
+    }
   }
 }
 
@@ -124,6 +143,8 @@ module RoundEdge(left_cnr, right_cnr) {
 }
 
 module RoundCornerCut(ci) {
+  // ci should be [this_cnr, right_cnr]
+  // where right_cnr is to the right (ie, anticlockwise)
   this_cnr = ci[0];
   right_cnr = ci[1];
   offr= round_cnr_rad - round_edge_rad;
@@ -239,6 +260,7 @@ module TestPiece1(){ ////toplevel
            [   0, 0]
            ];
   corners = TestPiece_holes2corners(holes);
+  rcs = [corners[0], corners[1]];
   difference(){
     union(){
       TileBase(corners[0], corners[2]);
@@ -247,9 +269,9 @@ module TestPiece1(){ ////toplevel
       RoundEdge(corners[3], corners[0]);
     }
     InterlockEdge(corners[1], corners[2], 1, nlobes=1);
-    RoundCornerCut(corners[0], corners[1]);
+    RoundCornerCut(rcs);
   }
-  RoundCornerAdd(corners[0], corners[1]);
+  RoundCornerAdd(rcs);
 }
 
 module TestPiece2(){ ////toplevel
@@ -272,6 +294,8 @@ module TestDemo(){ ////toplevel
 }
   
 function Rectangle_corners(c0, sz) =
+  // returns the corners of a rectangle from c0 to c0+sz
+  // if sz is positive, the corners are anticlockwise starting with c0
   [ c0 + [ 0,     0     ],
     c0 + [ sz[0], 0     ],
     c0 + [ sz[0], sz[1] ],