screw-recess-test: new tests

[reprap-play.git] / screw-recess-test.scad

diff --git a/screw-recess-test.scad b/screw-recess-test.scad
index 9e3a333a68ee217132bfb1d9cb5d2f986e2131a1..19c7c63c224f6b5b996f57b48bb6c71700278628 100644 (file)
--- a/screw-recess-test.scad
+++ b/screw-recess-test.scad
@@ -4,7 +4,19 @@ cubez = 12;
 
 shaftz = cubez;
 
-tests = [[4 + 0.5,  10 + 1.0]];
+//        shaftdia  recessdia
+tests = [[2 + 0.5,   6 + 1.0,   4, -4 ],
+        [3 + 0.5,   9 + 1.0,   0, 10 ],
+        [4 + 0.5,  10 + 1.0,   0, 25 ],
+        [5 + 0.5,  10 + 1.0,  17,  4 ],
+        [6 + 0.5,  12 + 1.0,  17, 20 ]];
+
+last_test = tests[len(tests)-1];
+
+blockminx = -5;
+blockminy = -5;
+blockmaxx = 25;
+blockmaxy = 20;
 
 cubexy = 20;
 
@@ -15,39 +27,50 @@ module RecessScrewCutout_RecessCylinder(recessdia,zbelow, h){
 RecessedScrewCutout_defaultrecessdepth_flat = -0.35;
 RecessedScrewCutout_defaultrecessdepth_hex = -0.70;
 
+function RecessedScrewCutout_recessdepth(recessdia,
+        recessdepth_arg=RecessedScrewCutout_defaultrecessdepth_flat) =
+  recessdepth_arg >= 0 ? recessdepth_arg : -recessdepth_arg * recessdia;
+
+function RecessedScrewCutout_totaldepth(recessdia,
+        recessdepth_arg=RecessedScrewCutout_defaultrecessdepth_flat) =
+  RecessedScrewCutout_recessdepth(recessdia, recessdepth_arg) +
+  + 0.5*recessdia + 0.1;
+
 module RecessedScrewCutout(shaftdia, recessdia, shaftlen,
-        recessdepth_arg=RecessedScrewCutout_defaultrecessdepth_flat,
-        zbelow=1) {
+        zbelow=1,
+        recessdepth_arg=RecessedScrewCutout_defaultrecessdepth_flat) {
   // pass recessdepth_arg=-1 for the default for flat heads
   // pass recessdepth_arg=-1 for the default for flat heads
-  recessdepth = recessdepth_arg >= 0 ? recessdepth_arg
-    : -recessdepth_arg * recessdia;
-  recesstopz = recessdepth + 0.5*recessdia + 0.1;
-  xblocky = shaftdia + 0.1;
+  recessdepth = RecessedScrewCutout_recessdepth(recessdia, recessdepth_arg);
+  recesstopz = RecessedScrewCutout_totaldepth(recessdia, recessdepth_arg);
 
   translate([0,0,-zbelow]) cylinder(r=shaftdia/2, h=shaftlen+zbelow, $fn=20);
   RecessScrewCutout_RecessCylinder(recessdia,zbelow, recessdepth);
   intersection(){
-    translate([-recessdia*1.5, -xblocky/2, -zbelow])
-      cube([recessdia*3, xblocky, recesstopz+2+zbelow]);
+    cube([recessdia + 1, shaftdia + 0.1, recesstopz*2 + 1], center=true);
     translate([0, -recessdia, recesstopz])
       rotate([0,135,0]) cube([recessdia, recessdia*2, 10]);
     RecessScrewCutout_RecessCylinder(recessdia,zbelow, recesstopz+1);
   }
 }
 
-module Test(){
+module OneTest(t){
+  blocksz = t[1] + 7;
+  h = RecessedScrewCutout_totaldepth(t[1]) + 3;
   difference(){
-    translate([-cubexy/2, -cubexy/2, 0])
-      cube([cubexy,cubexy,cubez]);
+    translate([-blocksz/2, -blocksz/2, 0])
+      cube([blocksz, blocksz, h]);
+    RecessedScrewCutout(t[0],t[1], h+1);
   }
 }
 
-module Hole(){
-    RecessedScrewCutout(tests[0][0],
-                       tests[0][1],
-                       shaftz+1);
+module Tests(){
+  for (t = tests)
+    translate([t[2], t[3], 0])
+      OneTest(t);
 }
 
-//Test();
-Hole();
+//OneTest(tests[1]);
+Tests();
+//Hole();
+//Holes();