poster-tube-lid: catch: adjust stalk height from v1

[reprap-play.git] / poster-tube-lid.scad

diff --git a/poster-tube-lid.scad b/poster-tube-lid.scad
index 91ce3cccd022d76ef5f3a44b93368e12dac4f75e..d5d1f9318f3c2d7c1ad6c1c477f3148e4709f5ab 100644 (file)
--- a/poster-tube-lid.scad
+++ b/poster-tube-lid.scad
@@ -77,24 +77,23 @@ sm_bolt_y_over = 0.5;
 
 sm_closure_cnr = 3.0;
 
-catch_stem_h = 3;
-catch_stem_len = 50;
-catch_stem_th = 3;
+catch_stalk_h = 4.5;
+catch_stalk_len = 50;
+catch_head_th = 3;
 
 catch_pin_slop = 0.25; // each side, and above
+catch_pin_slop_x_extra = 0.0; // only on one side
 catch_stalk_above_gap = 1.5;
-catch_stalk_eff_bend_rad = catch_stem_len * 0.75;
+catch_stalk_eff_bend_rad = catch_stalk_len * 0.75;
 
 catch_stalk_base_width = 15;
 
 catch_knob_dia = 6;
-catch_knob_above_gap = 8;
-catch_knob_height = 6;
+catch_knob_above_gap = 5;
+catch_knob_height = 5;
 
-catch_stem_below_gap = 1.0;
-catch_stem_beside_gap = 2.0;
-catch_pin_gap = 0.5;
-catch_hook_slope = 0.15;
+catch_stalk_below_gap = 1.0;
+catch_stalk_beside_gap = 2.0;
 
 // calculated
 
@@ -149,12 +148,9 @@ smc_max_y = smc_bolt_y + sm_bolt_y_over
 smc_cnr_c_x = sm_bolt_shaft/2 - sm_closure_cnr
   + sm_bolt_head_thick/2 + smc_bolt_nut_eff_thick/2;
 
-catch_cr = catch_knob_dia/2 + catch_stem_beside_gap;
+catch_cr = catch_knob_dia/2 + catch_stalk_beside_gap;
 catch_strap_width = sm_main_width;
 catch_strap_thick = sm_main_thick;
-catch_stem_end_h = catch_stem_h;
-catch_pin_width = (rivet_entry_width * sm_inner_rad / bayo_nom_rad)
-                  - catch_pin_gap;
 
 echo("R ", sm_inner_rad, bayo_real_rad, bayo_nom_rad);
 
@@ -209,21 +205,29 @@ cppxC = 0.41 * sm_inner_rad * TAU;
 
 // catch pin
 
-cppa = bayo_f + [1,-1] * catch_pin_slop;
-cppb = bayo_g + [1,-1] * catch_pin_slop;
-cppd = [ bayo_n[0] - catch_pin_slop, -catch_stalk_above_gap ];
+cpp_adj = (bayo_n[0] - bayo_f[0]) * (1 - sm_inner_rad / bayo_nom_rad);
+// radius scaling due to nom and actual radius difference in
+// bayo entry construction
+
+cppa = bayo_f + [1,-1] * catch_pin_slop + [1,0] * cpp_adj;
+cppb = bayo_g + [1,-1] * catch_pin_slop + [1,0] * cpp_adj;
+cppd = [ bayo_n[0]
+        - catch_pin_slop - catch_pin_slop_x_extra,
+        -catch_stalk_above_gap ];
 cppc = [ cppd[0], cppb[1] ];
-cpph = cppd + [0,-1] * catch_stem_h;
+cpph = cppd + [0,-1] * catch_stalk_h;
 cppe = cppd + [0,-1] * (catch_knob_above_gap + catch_knob_dia/2);
 cppf = [ cppa[0], cppe[1] ];
 cppg = [ cppa[0], cpph[1] ];
 cppB = 0.5 * (cppf + cppe);
 
+echo("RR", sm_inner_rad / bayo_nom_rad);
+
 // catch assembly depression below pin
 
 cppy6 = cppB[1] - (catch_knob_dia/2
                   + (cppc[1] - cppd[1])
-                  + catch_stem_below_gap);
+                  + catch_stalk_below_gap);
 cpp7 = [ cppB[0], cppy6 + catch_cr ];
 cpp11 = cpp7 + [1,0] * catch_cr;
 cppy9 = cppy6 + catch_strap_width * 1/3;
@@ -236,7 +240,7 @@ cppD = cppC + [0,-1] * catch_strap_width;
 // catch assembly stalk and so on
 
 cppF = [ cppg[0] - catch_stalk_eff_bend_rad, cppd[1] ];
-cpp4 = [ cppg[0] - catch_stem_len, cpph[1] ] + [1,-1] * catch_cr;
+cpp4 = [ cppg[0] - catch_stalk_len, cpph[1] ] + [1,-1] * catch_cr;
 cpp5 = [ cpp4[0], cppC[1] + catch_cr ];
 cpp2 = cpp5 + [-1,0] * (catch_cr * 2 + catch_stalk_base_width);
 cpp2r = cpp2 + [1,0] * catch_cr;
@@ -245,6 +249,8 @@ cpp3 = [ cpp2[0] + catch_cr * 2, cppd[1] - catch_cr ];
 cppA = [ -cppxC, cpp9[1] ];
 cppE = [ cppA[0], cppD[1] ];
 
+catch_assembly_dy = -cppy9 + catch_strap_width;
+
 
 module MainProfile(){
   main_cnr_pos = [ side_thick, top_z ] - [1,1]*main_cnr;
@@ -589,6 +595,7 @@ module CatchAssemblyCoreProfile(){
               cpp11,
               ]);
     }
+    translate(cpp2) circle(r= catch_cr);
   }
 }
 
@@ -597,7 +604,7 @@ module CatchHeadProfile(){
     translate(cppF){
       difference(){
        circle(r = dist2d(cppF, cppd));
-       circle(r = dist2d(cppF, cppa));
+       //circle(r = dist2d(cppF, cppa));
       }
     }
     polygon([ cppa,
@@ -619,11 +626,11 @@ module CatchCore(){ /////toplevel
   linear_extrude(height=catch_strap_thick, convexity=10)
     CatchAssemblyCoreProfile();
 
-  linear_extrude(height=catch_strap_thick, convexity=10)
+  linear_extrude(height=catch_head_th, convexity=10)
     CatchHeadProfile();
 
   translate(concat(cppB,[0])) hull(){
-    translate([0,0, catch_knob_height - catch_knob_dia/2])
+    translate([0,0, catch_knob_height + catch_head_th - catch_knob_dia/2])
       sphere(r = catch_knob_dia/2);
     cylinder(r = catch_knob_dia/2, h = 0.1);
   }
@@ -636,8 +643,8 @@ module CatchPreDistort(){ /////toplevel
 }
 
 module CatchAssembly(){ /////toplevel
-  rotate([0,0, -0.5 * (cpp1[0] + cpp2[0]) / sm_inner_rad * 360/TAU])
-    translate([0,0, catch_strap_width])
+  rotate([0,0, -(cppe[0] + cppB[0] + catch_pin_slop) / sm_inner_rad * 360/TAU])
+    translate([0,0, catch_assembly_dy])
     scale(sm_inner_rad / 100)
     import(str("poster-tube-lid,CatchPostDistort-fa",
               (coarse ? 20 : 3),
@@ -655,8 +662,7 @@ module CatchAssembly(){ /////toplevel
 
 module CatchDemo(){ /////toplevel
   color("blue") translate([0,0,
-            -catch_strap_width
-            -cpp0[1]
+                          -catch_assembly_dy
             ])
     CatchAssembly();
   translate([0,0,+side_height
@@ -666,8 +672,7 @@ module CatchDemo(){ /////toplevel
 
 module CatchDemoS(){ /////toplevel
   color("blue") translate([0,0,
-            -catch_strap_width
-            -cpp0[1]
+            -catch_assembly_dy
             ])
     CatchAssembly();
   intersection(){