// -*- C -*-
+include <funcs.scad>
+
coarse = false;
main_dia = 71.2 + 0.50 - 2.26;
sm_closure_cnr = 3.0;
-catch_stem_h = 3;
-catch_stem_len = 50;
-catch_stem_th = 3;
+catch_stalk_h = 4.5;
+catch_stalk_len = 50;
+catch_head_th = 3;
+
+catch_pin_slop = 0.25; // each side, and above
+catch_pin_slop_x_extra = 0.0; // only on one side
+catch_stalk_above_gap = 1.5;
+catch_stalk_eff_bend_rad = catch_stalk_len * 0.75;
+
+catch_strap_width = 12;
+catch_stalk_base_width = catch_stalk_h;
catch_knob_dia = 6;
-catch_knob_above_gap = 8;
-catch_stem_end_h = 12;
-catch_pin_height = 7;
+catch_knob_above_gap = 5;
+catch_knob_height = 5;
-catch_stem_below_gap = 1.0;
-catch_stem_beside_gap = 2.0;
-catch_pin_gap = 0.5;
+catch_stalk_below_gap = 1.0;
+catch_stalk_beside_gap = 2.0;
// calculated
bayo_entry = bayo_behind / 3.0;
bayo_top_z = bayo_behind + bayo_gap;
+bayo_nom_rad = main_dia/2 + side_thick;
+bayo_real_rad = main_dia/2 + rivet_tall;
+
rivet_entry_width = rivet_width + side_rivet_gap;
jig_mark_rad = jig_mark + main_dia/2 + jig_thick;
smc_cnr_c_x = sm_bolt_shaft/2 - sm_closure_cnr
+ sm_bolt_head_thick/2 + smc_bolt_nut_eff_thick/2;
-catch_cr = catch_knob_dia/2 + catch_stem_beside_gap;
-catch_strap_width = sm_main_width;
-
-cpp0 = [0,0];
-cpp1 = cpp0 + [0,1] * catch_pin_height;
-cpp2 = cpp0 + [1,0] * (rivet_entry_width - catch_pin_gap);
-cpp3 = cpp2 + [0,-1] * catch_stem_end_h;
-cpp4 = cpp2 + [0,-1] * catch_stem_end_h;
-cpp5 = [ cpp0[0] - catch_stem_len,
- cpp0[1] - (catch_stem_h + catch_cr) ];
-cppB = [ 0.5*(cpp1 + cpp2)[0],
- cpp1[1] - catch_pin_height - catch_knob_above_gap -
- 0.5 * catch_knob_dia ];
-cpp7 = cppB + [-1,-1] * catch_knob_dia/2
- + [ catch_stem_beside_gap, -catch_stem_below_gap ]
- + [ 0, -catch_pin_height ]
- + [-1,1] * catch_cr;
-cpp6 = [ cpp5[0], cpp7[1] ];
-cpp8 = [ cpp7[0] + catch_cr*2,
- cpp0[0] - catch_cr ];
-cppC = cpp8 + [1,1] * catch_cr;
-cppA = [ cpp5[0] - catch_cr*2, cpp0[1] ];
-cppD = cppC + [0,-1] * catch_strap_width;
-cppE = [ cppA[0], cppD[1] ];
+catch_cr = catch_knob_dia/2 + catch_stalk_beside_gap;
+catch_strap_thick = sm_main_thick;
+
+echo("R ", sm_inner_rad, bayo_real_rad, bayo_nom_rad);
$fs= coarse ? 2.5 : 0.5;
$fa= coarse ? 5 : 1;
echo(bayo_polygon);
+// CATCH
+
+cppxC = 0.41 * sm_inner_rad * TAU;
+
+// catch pin
+
+cpp_adj = (bayo_n[0] - bayo_f[0]) * (1 - sm_inner_rad / bayo_nom_rad);
+// radius scaling due to nom and actual radius difference in
+// bayo entry construction
+
+cppa = bayo_f + [1,-1] * catch_pin_slop + [1,0] * cpp_adj;
+cppb = bayo_g + [1,-1] * catch_pin_slop + [1,0] * cpp_adj;
+cppd = [ bayo_n[0]
+ - catch_pin_slop - catch_pin_slop_x_extra,
+ -catch_stalk_above_gap ];
+cppc = [ cppd[0], cppb[1] ];
+cpph = cppd + [0,-1] * catch_stalk_h;
+cppe = cppd + [0,-1] * (catch_knob_above_gap + catch_knob_dia/2);
+cppf = [ cppa[0], cppe[1] ];
+cppg = [ cppa[0], cpph[1] ];
+cppB = 0.5 * (cppf + cppe);
+
+echo("RR", sm_inner_rad / bayo_nom_rad);
+
+// catch assembly depression below pin
+
+cppy6 = cppB[1] - (catch_knob_dia/2
+ + (cppc[1] - cppd[1])
+ + catch_stalk_below_gap);
+cpp7 = [ cppB[0], cppy6 + catch_cr ];
+cpp11 = cpp7 + [1,0] * catch_cr;
+cppy9 = cppy6 + catch_strap_width * 1/3;
+cpp9 = [ cpp7[0] + catch_cr * 2, cppy9 ];
+cpp8 = cpp9 + [0,-1] * catch_cr;
+cpp10 = cpp8 + [-1,0] * catch_cr;
+cppC = [ cppxC, cpp9[1] ];
+cppD = cppC + [0,-1] * catch_strap_width;
+
+// catch assembly stalk and so on
+
+catch_cr3 = catch_cr + catch_stalk_h;
+
+cppF = [ cppg[0] - catch_stalk_eff_bend_rad, cppd[1] ];
+cpp4 = [ cppg[0] - catch_stalk_len, cpph[1] ] + [1,-1] * catch_cr;
+cpp5 = [ cpp4[0], cppC[1] + catch_cr ];
+cpp2 = cpp5 + [-1,0] * (catch_cr * 2 + catch_stalk_base_width);
+cpp2r = cpp2 + [1,0] * catch_cr;
+cpp2d = cpp2 + [0,-1] * catch_cr;
+cpp3 = [ cpp2[0] + catch_cr + catch_cr3, cppd[1] - catch_cr3 ];
+cppA = [ -cppxC, cpp9[1] ];
+cppE = [ cppA[0], cppD[1] ];
+
+catch_assembly_dy = -cppy9 + catch_strap_width;
+
+
module MainProfile(){
main_cnr_pos = [ side_thick, top_z ] - [1,1]*main_cnr;
difference(){
module BayonetCutout(){
RotateProject(bayo_c[0], bayo_i[0], bayo_slice_size,
- main_dia/2 + side_thick,
- main_dia/2 + rivet_tall)
+ bayo_nom_rad,
+ bayo_real_rad)
translate([-0.5 * (bayo_a[0] + bayo_d[0]), 0])
polygon(bayo_polygon, convexity=10);
}
ImplHeadCup();
}
-module StrapMountBolt(l_delta){ ///toplevel
+module SomeStrap(width){
+ // children(0) is to add, (1) subtract
+ difference(){
+ union(){
+ cylinder(r=sm_outer_rad, h=width);
+ StrapMountProtrusion(smc_cnr_c_x + sm_closure_cnr,
+ smc_max_y,
+ sm_closure_cnr,
+ width);
+ children(0);
+ }
+ translate([0,0,-1])
+ cylinder(r=sm_inner_rad, h=width+2);
+ translate(smc_pos)
+ StrapMountBolt(10, width);
+ translate(smc_pos)
+ cube([ sm_bolt_tighten_allow, 40,100 ], center=true);
+ children(1);
+ }
+}
+
+module StrapMountBolt(l_delta, strap_width){ ///toplevel
// positioned relative to smc_pos
translate([(smc_bolt_nut_eff_thick - sm_bolt_head_thick)/2,
smc_bolt_y,
- sm_main_width/2]){
+ strap_width/2]){
translate([ -sm_bolt_shaft/2-1, 0,0 ]){
rotate([0,90,0]) cylinder(r= sm_bolt_dia/2, h= sm_bolt_shaft+2);
}
}
}
-module StrapMountProtrusion(half_x, max_y, cnr){
+module StrapMountProtrusion(half_x, max_y, cnr, width){
translate(smc_pos){
- linear_extrude(height=sm_main_width, convexity=10){
+ linear_extrude(height=width, convexity=10){
hull(){
for (m = [0,1]) mirror([m,0,0]) {
translate([-(half_x - cnr), max_y - cnr])
}
module StrapMount(){ ////toplevel
+ SomeStrap(sm_main_width){
+ rotate([0,0,180]){
+ StrapMountProtrusion(strap_hoop_inside/2 + strap_hoop_thick,
+ strap_hoop_thick,
+ sm_closure_cnr);
+ translate(smc_pos +
+ [0,0, sm_main_width] +
+ strap_hoop_thick * [ 0, 0.5, -1.0 ])
+ StrapHoop();
+ }
+ union(){ };
+ }
+}
+
+module CatchAssemblyCoreProfile(){
difference(){
union(){
- cylinder(r=sm_outer_rad, h=sm_main_width);
- StrapMountProtrusion(smc_cnr_c_x + sm_closure_cnr,
- smc_max_y,
- sm_closure_cnr);
- rotate([0,0,180]){
- StrapMountProtrusion(strap_hoop_inside/2 + strap_hoop_thick,
- strap_hoop_thick,
- sm_closure_cnr);
- translate(smc_pos +
- [0,0, sm_main_width] +
- strap_hoop_thick * [ 0, 0.5, -1.0 ])
- StrapHoop();
+ hull(){
+ translate(cpp3) circle(r= catch_cr3);
+ polygon([ cpp3,
+ cpp2r,
+ cpp5,
+ cpph,
+ cppd
+ ]);
}
+ polygon([cppD,
+ cppC,
+ cpp9,
+ cpp10,
+ cpp11,
+ cpp4,
+ cpp2r,
+ cpp2d,
+ cppA,
+ cppE
+ ]);
+ translate(cpp8) circle(r= catch_cr);
}
- translate([0,0,-1])
- cylinder(r=sm_inner_rad, h=sm_main_width+2);
- translate(smc_pos)
- StrapMountBolt(10);
- translate(smc_pos)
- cube([ sm_bolt_tighten_allow, 40,100 ], center=true);
+ hull(){
+ translate(cpp4) circle(r= catch_cr);
+ translate(cpp5) circle(r= catch_cr);
+ translate(cpp7) circle(r= catch_cr);
+ polygon([cpp4,
+ cppg,
+ cpph,
+ cpp10,
+ cpp11,
+ ]);
+ }
+ translate(cpp2) circle(r= catch_cr);
}
+ // if cpp11 is above cpp10, the subtracted hull above
+ // can go down too far. Ensure we do not cut off below cppy6.
+ polygon([ cppE,
+ cppD,
+ cpp9,
+ [ cpp9[0], cppy6 ],
+ [ cpp7[0] - catch_cr, cppy6 ],
+ cpp2d
+ ]);
}
-module CatchCoreProfile(){
- difference(){
- polygon([ cpp4,
- cpp3,
- cpp2,
- cpp1,
- cpp0,
- cppA,
- cppE,
- cppD,
- cppC,
- ]);
+module CatchHeadProfile(){
+ intersection(){
+ translate(cppF){
+ difference(){
+ circle(r = dist2d(cppF, cppd));
+ //circle(r = dist2d(cppF, cppa));
+ }
+ }
+ polygon([ cppa,
+ cppg,
+ cpph,
+ cppd,
+ cppc,
+ cppb ]);
+ }
+ polygon([ cppd,
+ cppg,
+ cppf,
+ cppe,
+ cpph ]);
+}
+
+
+module CatchCore(){ /////toplevel
+ linear_extrude(height=catch_strap_thick, convexity=10)
+ CatchAssemblyCoreProfile();
+
+ linear_extrude(height=catch_head_th, convexity=10)
+ CatchHeadProfile();
+
+ translate(concat(cppB,[0])) hull(){
+ translate([0,0, catch_knob_height + catch_head_th - catch_knob_dia/2])
+ sphere(r = catch_knob_dia/2);
+ cylinder(r = catch_knob_dia/2, h = 0.1);
+ }
+}
+
+module CatchPreDistort(){ /////toplevel
+ scale(100 / sm_inner_rad)
+ rotate([90,0,0])
+ CatchCore();
+}
+
+module CatchAssembly(){ /////toplevel
+ rotate([0,0, -(cppe[0] + cppB[0] + catch_pin_slop) / sm_inner_rad * 360/TAU])
+ translate([0,0, catch_assembly_dy])
+ scale(sm_inner_rad / 100)
+ import(str("poster-tube-lid,CatchPostDistort-fa",
+ (coarse ? 20 : 3),
+ ".stl"),
+ convexity=20);
+
+ SomeStrap(catch_strap_width){
+ union(){ }
+ union(){
+ translate([-200, -200, -200])
+ cube([400, 200, 400]);
+ }
+ }
+}
+
+module CatchDemo(){ /////toplevel
+ color("blue") translate([0,0,
+ -catch_assembly_dy
+ ])
+ CatchAssembly();
+ translate([0,0,+side_height
+ ])
+ Cover();
+}
+
+module CatchDemoS(){ /////toplevel
+ color("blue") translate([0,0,
+ -catch_assembly_dy
+ ])
+ CatchAssembly();
+ intersection(){
+ translate([0,0,+side_height
+ ])
+ Cover();
+ mirror([0,1,0]) translate([-250,33,0]) cube([500,500,500]);
+ }
+ color("black")
+ translate([0,-33,0])
+ cube([6.15, 2,2], center=true);
+}
+
+module CatchPinProfileDemo(){ /////toplevel
+ echo("G ",
+ cpp2[0] - cpp1[0],
+ bayo_n[0] - bayo_e[0]);
+ color("blue") translate([0,0,
+ +1,
+ ]) {
+ CatchAssemblyCoreProfile();
+ CatchHeadProfile();
}
+ polygon(bayo_polygon, convexity=10);
}
//ProfilesDemo();
~ianmdlvl / reprap-play.git / blobdiff