sewing-table: Tile01 wip

[reprap-play.git] / maglite-holder.scad

diff --git a/maglite-holder.scad b/maglite-holder.scad
index fcabdee767e830b23cc9a30f9e8f2bd69a0696f8..9aed425a551bf5688ae807ccd50e51cda351a17b 100644 (file)
--- a/maglite-holder.scad
+++ b/maglite-holder.scad
@@ -24,13 +24,17 @@ brace = [ 40, 20, 20 ];
 hole_dia = 4 + 0.5;
 hole_slot = 5;
 
-slop = 2; // total, not each side
+movement_extra_angle = 5;
+
+slop = 4; // total, not each side
 
 torch_min_xcoord_fig_cm = -2.7; // coordinates of bottom left of curve
 torch_min_ycoord_fig_cm = -5.9; // & big part in fig file.  mid top is origin
 torch_smm_xcoord_fig_cm = -1.9; // x coord of lhs of narrow part
 
-//$fa=5;
+miniature = 1; // can adjust this to get commitid size right and rescale *Print
+
+$fa=5;
 
 // calculated
 
@@ -97,9 +101,12 @@ module TorchMovement(){
   translate([0, -torch_out, 0]) {
     translate([0, 0, -torch_recess])
       Torch();
-    rotate([90,0,0])
-      linear_extrude(height= block_out)
-      projection() rotate([-90,0,0]) Torch();
+    for (as=[-1,+1]) {
+      rotate([0,0, as*movement_extra_angle])
+       rotate([90,0,0])
+       linear_extrude(height= block_out)
+       projection() rotate([-90,0,0]) Torch();
+    }
   }
 }
 
@@ -122,7 +129,9 @@ module Bracket(){ ////toplevel
     ScrewHole(holes[1], 0);
     translate([-cid_w/2, 0, above - holes[0] - hole_near])
       rotate([-90,0,0])
-      Commitid_BestCount([cid_w, holes[1]-holes[0] - hole_near*2]);
+      scale([miniature, miniature, 1])
+      Commitid_BestCount([cid_w, holes[1]-holes[0] - hole_near*2]
+                        / miniature);
   }
   difference(){
     mirror([0,1,0])
@@ -133,11 +142,13 @@ module Bracket(){ ////toplevel
 }
 
 module BracketPrint(){ ////toplevel
-  rotate([-90,0,0])
+  scale(1/miniature)
+    rotate([-90,0,0])
     Bracket();
 }
 
 module TestTorchPrint(){ ////toplevel
+  scale(1/miniature)
   intersection(){
     translate([0,0, torch_lit_dia / 2 / sqrt(2)])
       rotate([-90,0,0])