sleepphone-cable-box: wip, keeper, etc.

[reprap-play.git] / knifeblock.scad

diff --git a/knifeblock.scad b/knifeblock.scad
index 4ca20e79a2012ccfc4c9a04a8a2a641780bf6c3f..c1f1869f4b1a07e9a777f9077b0274ccc7478a63 100644 (file)
--- a/knifeblock.scad
+++ b/knifeblock.scad
@@ -45,6 +45,10 @@ holeedge = 4;
 holeoffx = 0.33;
 holeoffy = 0.23;
 
+indentdepth = 1;
+indentoutersize = holesize + 2.15;
+indentinnersize = indentoutersize - indentdepth * 3.0;
+
 pegstem = 3.5;
 peghead = 10;
 pegstemheight = 2;
@@ -133,13 +137,25 @@ module AtSides(){
 }
 
 module BlockPegSlot(){
-  translate([recessblockwidth/2, pegrecess - 0.5*peglen, -height]){
+  translate([recessblockwidth/2, pegrecess - peglen, -height]){
     rotate([-90,0,0]) linear_extrude(height=totaldepth){
       PegTemplate(peghead/2 * 1.2);
     }
   }
 }
 
+module DecorativeIndents(){
+  translate([0, -front, 0])
+  rotate([90,0,0])
+  HexGrid(-height, 0, minx,maxx) {
+    hull(){
+      translate([0, 0, -indentdepth])
+       cylinder(r=indentinnersize/2, h=indentdepth, $fn=40);
+      cylinder(r=indentoutersize/2, h=indentdepth, $fn=40);
+    }
+  }
+}
+
 module Block(){
   sidemidx = minsideout + screwcsinkdia/2;
 
@@ -156,6 +172,7 @@ module Block(){
       translate([0, yshift * frontbackslop, 0])
        DoKnives();
     AtSides() { BlockPegSlot(); BlockPegSlot(); }
+    DecorativeIndents();
   }
 }
 
@@ -168,9 +185,9 @@ module CoverTemplate(){
   linear_extrude(height=coverthick)
     polygon([[minx, 0],
             [maxx, 0],
-            [maxx, coverlonglen],
-            [maxx - coverside, coverlonglen],
-            [minx, covershortlen]]);
+            [maxx, coverlonglen+0.1],
+            [maxx - coverside, coverlonglen+0.1],
+            [minx, covershortlen+0.1]]);
 }
 
 module CoverSide(len){
@@ -214,13 +231,6 @@ module CoverPegSlot(coverlen){
   }
 }
 
-module HoleRow(){
-  for (i=[0:10]) {
-    translate([0, (i+0.5)*holepitch, -20])
-      cylinder(r=holesize/2, h=40, $fn=20);
-  }
-}
-
 module HolesScope(){
   intersection_for (dx=[-1,+1]) {
     intersection_for (dy=[-1,+1]) {
@@ -231,17 +241,34 @@ module HolesScope(){
   }
 }
 
-module Holes(){
-  intersection(){
-    translate([holeoffx * holepitch, holeoffy * holepitch, 0]) {
-      for (i=[-10:10]) {
-       translate([i * sqrt(3) * holepitch, 0, 0]) {
-         HoleRow();
-         translate([sqrt(3)/2 * holepitch, -0.5 * holepitch, 0])
-           HoleRow();
-       }
+module HexGrid(xa,xb,ya,yb) {
+  imin = floor(xa / holepitch);
+  imax =  ceil(xb / holepitch);
+  jmin = floor(ya / (sqrt(3)*holepitch));
+  jmax =  ceil(yb / (sqrt(3)*holepitch));
+  echo("HexGrid ",imin,imax,jmin,jmax);
+  for (i=[imin:imax]) {
+    for (j=[jmin:jmax]) {
+      translate([(j * sqrt(3) + holeoffx) * holepitch,
+                (i +     0.5 + holeoffy) * holepitch,
+                0]) {
+       child();
+       translate([sqrt(3)/2 * holepitch, -0.5 * holepitch, 0])
+         child();
       }
     }
+  }
+}
+
+module Hole(){
+  cylinder(r=holesize/2, h=40, $fn=40);
+}
+
+module Holes(){
+  intersection(){
+    translate([0, 0, -20])
+      HexGrid(0, coverlonglen, minx, maxx)
+      Hole();
     HolesScope();
   }
 }
@@ -281,11 +308,30 @@ module Demo(){ ////toplevel
   color([1,0,0]) AtSides() { DemoPeg(); DemoPeg(); }
 }
 
+module Pegs(){ ////toplevel
+  Peg();
+  translate([-peghead-3, 0,0]) Peg();
+}
+
 module CoverParts(){ ////toplevel
   Cover();
-  translate([0, coverlonglen, pegheight/2]) {
-    Peg();
-    translate([-peghead-3, 0,0]) Peg();
+  translate([0, coverlonglen, pegheight/2-pegslopv])
+    Pegs();
+}
+
+module FrontDemo(){ ////toplevel
+  color([1,0,1]) Block();
+  color([1,0,1]) CoverAligned();
+  color([0,0,0]) DoKnives();
+}
+
+module BlockFrontTest(){ ////toplevel
+  intersection(){
+    Block();
+    translate([minx-10, -front-10, -height-10]) {
+      cube([75,14,35]);
+      cube([75,25,13]);
+    }
   }
 }
 
@@ -295,3 +341,6 @@ module CoverParts(){ ////toplevel
 //CoverParts();
 //Peg();
 //Cover();
+//Holes();
+//%CoverTemplate();
+//Pegs();