flyscreen-handle: separate out test

[reprap-play.git] / flyscreen-handle.scad

diff --git a/flyscreen-handle.scad b/flyscreen-handle.scad
index 38597d6f201f774f0841ea8961e9f91e50a4677c..c927ec5c1bae8e803708fe1916856e99f3cbbd92 100644 (file)
--- a/flyscreen-handle.scad
+++ b/flyscreen-handle.scad
@@ -2,8 +2,8 @@
 
 opening_height = 7.84;
 opening_depth = 7.88;
-openingedge_dia = 1.34;
-opening_protrh = 1.8;
+openingedge_dia = 2.00;
+opening_protrh = 2.00;
 
 pivot_x = 6;
 inside_len = 4;
@@ -30,7 +30,11 @@ inside_h_xgap = 1;
 pivot_r = 2;
 pivot_slop = 0.25;
 
-width = 5;
+strap_above = 0.1;
+strap_th = 2.5;
+strap_below = 3;
+
+test_width = 5;
 
 // calculated
 
@@ -52,13 +56,11 @@ P1 = [ P2[0], P3t[1] - (inside_h + ourcirc_r*2) ];
 
 P5 = Q0 + p4p5d;
 
-P9mid = [ outside_len - ourcirc_r, outside_gap/2 + ourcirc_r ];
-P8mid = P9mid + [ 0, outend_height - ourcirc_r*2 ];
-
-P89adj = [ 0, P5[1] - P8mid[1] ];
+P8t = [ outside_len - ourcirc_r, P5[1] ];
+P9t = P8t + [ 0, -(strap_above + strap_th + strap_below - ourcirc_r*2) ];
 
-P8t = P8mid + P89adj;
-P9t = P9mid + P89adj;
+P9b = [ P9t[0], -P9t[1] + outside_gap ];
+P8b = P9b + [ 0, outend_height ];
 
 P6t = P5 + [ 0, outside_pushh - ourcirc_r*2 ];
 P7 = [ P6t[0] + (P6t[1] - P1[1]) / outside_pushslope,
@@ -105,28 +107,38 @@ module PsHull(ps) {
 
 module LeverSect(top, inadj=false){
   P3 = inadj ? P3a : P3t;
-  P8 = top ? P8t : P8mid - P89adj;
-  P9 = top ? P9t : P9mid - P89adj;
-  diag = inadj ? 0 : atan(outside_push_inadj_slope);
-  PsHull([P2,P3,P4]);
+  P6 = inadj ? P6a : P6t;
+  P8 = top ? P8t : P8b;
+  P9 = top ? P9t : P9b;
   difference(){
-    PsHull([P0,P1,P2,P5,P8,P9]);
-    translate(Q0) {
-      rotate(diag){
-       hull(){
-         circle(r=edge_or, $fn=20);
-         translate([0,10]) circle(r=edge_or, $fn=20);
-       }
+    union(){
+      PsHull([P2,P3,P4]);
+      PsHull([P0,P1,P2,P5,P8,P9]);
+    }
+    hull(){
+      for (dp = [ [0,0],
+                 (P6-P5),
+                 (P3-P4)
+                 ]) {
+       translate(Q0 + 5*dp) circle(r=edge_or, $fn=20);
       }
     }
   }
 }
 
-module StrapSect(){
-  translate(P9t) {
+module StrapSectTop(){
+  translate(P9t + ourcirc_r * [+1,-1]) {
     difference(){
-      circle(r = 4);
-      circle(r = 2);
+      circle(r = strap_below + strap_th, $fn=40);
+      circle(r = strap_below,            $fn=40);
+    }
+  }
+}
+
+module StrapSectBot(){
+  mirror([0,1]){
+    translate(P9b + [ ourcirc_r - (strap_below + strap_th), -10 ]) {
+      square([strap_th, 20]);
     }
   }
 }
@@ -160,22 +172,30 @@ module Demo(){
   LeverSectTop();
   translate([0,0,5]) LeverSectBot();
   color("black") LeverSectBot(true);
-  color("blue") translate([0,0,10]) StrapSect();
+  color("blue") translate([0,0,10]) StrapSectTop();
+  color("purple") translate([0,0,10]) StrapSectBot();
 }
 
 module LeverTop(){
-  linear_extrude(height=width, convexity=100) LeverSectTop();
+  LeverSectTop();
 }
 
 module LeverBot(inadj=false){
-  linear_extrude(height=width, convexity=100) LeverSectBot(inadj);
+  linear_extrude(height=test_width, convexity=100) LeverSectBot(inadj);
+}
+
+module SomeLever() {
+  // SomeLever(){ LeverBot(inadj); LeverSectBot(); }
 }
 
 module Test(){
-  translate([0,2,0]) LeverTop();
-  LeverBot();
-  translate([0,-opening_height - 2,0]) LeverBot(true);
+  linear_extrude(height=test_width, convexity=100) {
+    translate([0,2,0]) LeverSectTop();
+    LeverSectBot();
+    translate([0,-opening_height - 2,0]) LeverSectBot(true);
+  }
 }
 
-Demo();
-//Test();
+//LeverSectBot(true);
+//Demo();
+Test();