chiark / gitweb /
flyscreen-handle: Peg, wip, PegSectionSlice (not much functional change)
[reprap-play.git] / flyscreen-handle.scad
index 88924c9708a75525991d97c9af92bb7f1c0b8b9c..60622789b5753ccbca74fecaa1a263902acb66ff 100644 (file)
@@ -11,17 +11,17 @@ retain_rad = 1.65;
 retain_protr = 0.35;
 retain_hgap_adjust = 1.5;
 
-retain_stalk_len = 6.5;
+retain_stalk_len = 8.0;
 retain_stalk_h = 1.5;
 retain_bend_gap = 2.0;
-retain_empir_angle = -25;
-retain_pushmore_adj = 0.75;
+retain_empir_angle = -10;
+retain_pushmore_adj = 0.0;
 
 hgap_empir_adjust = -0.5 -2.50;
 
 topprotr_rad = 0.35;
 
-bot_overlap = 5;
+bot_overlap = 4;
 bot_w = 3;
 
 handle_w = 10;
@@ -31,10 +31,17 @@ handle_rcut = 3;
 cutout_gap = 1.5;
 
 total_len = 40;
+retain_len = 8;
 basics_len = 8;
 
 overret_hch = 5;
 
+peg_width_slop = 0.5;
+peg_inner_thick = 1.0;
+
+peg_wedge_less = 1.0;
+peg_wedge_more = 1.0;
+
 // calculated
 
 ins_irad = openingcnr_dia/2 + gap;
@@ -51,14 +58,23 @@ handle_x1 = handle_x0 + bot_w + handle_w;
 topprotr_y = -ins_irad + opening_topprotr;
 
 retain_mxy = [handle_x0 - retain_rad - retain_hgap_adjust,
-             -ins_orad + retain_rad - retain_protr - retain_pushmore_adj];
+             -ins_orad + retain_rad - retain_protr];
 
 retain_cutout_h = retain_rad * 2 + retain_bend_gap;
 
 overret_gaplen = retain_cutout_h / cos(retain_empir_angle);
 
-retaining_len = total_len - overret_gaplen - basics_len * 2;
-echo(retaining_len);
+peg_width = retain_stalk_len -
+  (handle_x0 - retain_mxy[0]) / cos(retain_empir_angle)
+  - peg_width_slop;
+
+peg_height = retain_cutout_h - (retain_rad + retain_stalk_h)
+  + retain_pushmore_adj;
+
+retain1_len = retain_len + retain_stalk_len;
+retain1_base = total_len - retain1_len;
+
+peg_len = retain_len;
 
 module InsertSection(){
   hull(){
@@ -115,11 +131,31 @@ module RetainSection(){
   translate(retain_mxy) {
     rotate(retain_empir_angle) {
       circle(r=retain_rad, $fn=20);
-      square([retain_stalk_len + 1, retain_stalk_h]);
+      translate([0, -retain_pushmore_adj])
+       square([retain_stalk_len + 1, retain_stalk_h]);
     }
   }
 }
 
+module PegSection(delta){
+  hull(){
+    translate([0, -delta/2])
+      square([0.1,
+             peg_height + delta]);
+    translate([peg_width - 0.1,
+              peg_height/2 - peg_inner_thick/2])
+      square([0.1, peg_inner_thick]);
+  }
+}
+
+module PegSectionForDemo(delta){
+  translate(retain_mxy)
+    rotate(retain_empir_angle)
+    translate([retain_stalk_len - peg_width - peg_width_slop/2,
+              retain_stalk_h - retain_pushmore_adj])
+    PegSection(delta);
+}
+
 module RetainCutout(gapping=false){
   translate(retain_mxy) {
     rotate(retain_empir_angle) {
@@ -157,14 +193,48 @@ module BasicSection(){
   HandleSection();
 }
 
+module PegSectionSlice(lambda) {
+  delta = peg_wedge_more * (1-lambda) + -peg_wedge_less * lambda;
+  z = peg_len * lambda;
+  translate([0,0, z])
+    linear_extrude(height=0.1)
+    PegSection(delta);
+}  
+
+module Peg(){
+  hull(){
+    PegSectionSlice(0);
+    PegSectionSlice(1);
+  }
+}
+
 module Handle(){
-  bs0 = retaining_len + overret_gaplen + basics_len;
-  bs1 = bs0 + overret_hch;
+  bs1 = retain_len + overret_gaplen + 4;
+
+  translate([0,0,0])
+    linear_extrude(height= retain_len)
+    WithRetainSection();
+
+  translate([0,0, bs1])
+    linear_extrude(height= basics_len)
+    BasicSection();
+
+  translate([0,0, bs1+0.1]) mirror([0,0,1]) {
+    intersection_for (sl=[0,1]) {
+      multmatrix([[1,0,0,0],
+                 [0,1,sl,0],
+                 [0,0,1,0],
+                 [0,0,0,1]])
+       linear_extrude(height= overret_gaplen + 10, convexity=100)
+       BasicSection();
+    }
+  }
+  
   linear_extrude(height=total_len, convexity=100) GappingSection();
 
-  translate([0,0, basics_len]) {
+  translate([0,0, retain1_base]) {
     intersection(){
-      linear_extrude(height=retaining_len, convexity=100)
+      linear_extrude(height=retain1_len, convexity=100)
        WithRetainSection();
       translate([retain_mxy[0], retain_mxy[1], 0])
        rotate([0,0, retain_empir_angle])
@@ -176,28 +246,12 @@ module Handle(){
        cube([50, 60, 50]);
     }
   }
-
-  for (z= [0, bs1]) {
-    translate([0,0, z])
-      linear_extrude(height= basics_len)
-      BasicSection();
-  }
-
-  translate([0,0, bs1+0.1]) mirror([0,0,1]) {
-    intersection_for (sl=[0,1]) {
-      multmatrix([[1,0,0,0],
-                 [0,1,sl,0],
-                 [0,0,1,0],
-                 [0,0,0,1]])
-       linear_extrude(height= overret_gaplen + 10, convexity=100)
-       BasicSection();
-    }
-  }
 }
 
 module Demo(){
   color("red") translate([0,0,-3]) BasicSection();
   color("blue") translate([0,0,3]) WithRetainSection();
+  color("orange") translate([0,0,7]) PegSectionForDemo(0);
 }
 
 module Test(){
@@ -215,5 +269,6 @@ module Test(){
 //BasicSection();
 //GappingSection();
 //Test();
+Peg();
 //Demo();
-Handle();
+//Handle();