flyscreen-handle: kit for v3 test

[reprap-play.git] / flyscreen-handle.scad

diff --git a/flyscreen-handle.scad b/flyscreen-handle.scad
index 52baafacebe76aaf700534fca1df2d035ec0e909..594ef48f481f83f64f33a91e08ada3266961945a 100644 (file)
--- a/flyscreen-handle.scad
+++ b/flyscreen-handle.scad
@@ -11,7 +11,7 @@ inside_len = 4;
 pivoting_gap = 0.1;
 
 outside_gap = 3;
-outside_len = 16;
+outside_len = 13;
 outend_height = 3;
 
 outside_pushh = 4;
@@ -33,8 +33,12 @@ pivot_slop = 0.25;
 strap_above = 0.1;
 strap_th = 2.5;
 strap_below = 3;
+strap_width = 5;
 
-width = 5;
+width = 35;
+nstraps = 2;
+
+test_width = 5;
 
 // calculated
 
@@ -73,6 +77,8 @@ outside_push_inadj_slope = (P3t[1]-P4[1]) / (P6a[1]-P5[1]);
 
 ribble_rad = ribble_dia/2;
 
+kit_adj_shift = -opening_height - 2.0;
+
 module ExtrusionSect(){
   cr = openingedge_dia/2;
   toph = opening_height/2 + opening_protrh;
@@ -176,20 +182,58 @@ module Demo(){
   color("purple") translate([0,0,10]) StrapSectBot();
 }
 
-module LeverTop(){
-  linear_extrude(height=width, convexity=100) LeverSectTop();
+module SomeLever() {
+  // SomeLever(){ LeverBot(inadj); LeverSectBot(); }
+  difference(){
+    linear_extrude(height=width, convexity=100) children(0);
+    for (i = [ 0 : nstraps - 1 ]) {
+      translate([0,0, (i + 0.5) / nstraps * width - strap_width/2])
+       linear_extrude(height=strap_width, convexity=10)
+       children(1);
+    }
+  }
 }
 
-module LeverBot(inadj=false){
-  linear_extrude(height=width, convexity=100) LeverSectBot(inadj);
+module Test(){
+  linear_extrude(height=test_width, convexity=100) {
+    translate([0,2,0]) LeverSectTop();
+    LeverSectBot();
+    translate([0,kit_adj_shift]) LeverSectBot(true);
+  }
 }
 
-module Test(){
+module LeverTop(){ ////toplevel
+  SomeLever(){
+    LeverSectTop();
+    StrapSectTop();
+  }
+}
+module LeverBot(){ ////toplevel
+  SomeLever(){
+    LeverSectBot();
+    StrapSectBot();
+  }
+}
+module LeverBotAdj(){ ////toplevel
+  SomeLever(){
+    LeverSectBot(true);
+    StrapSectBot(true);
+  }
+}
+
+module Kit(){ ////toplevel
   translate([0,2,0]) LeverTop();
   LeverBot();
-  translate([0,-opening_height - 2,0]) LeverBot(true);
+}
+
+module KitAdj(){ ////toplevel
+  translate([0,2,0]) LeverTop();
+  LeverBotAdj();
 }
 
 //LeverSectBot(true);
-Demo();
+//Demo();
+//LeverTop();
 //Test();
+//Kit();
+KitAdj();