slic3r-config: reduce temperatures, anke-gps-bracket parts seemed to stick to bed...

[reprap-play.git] / filamenttrestle.scad

diff --git a/filamenttrestle.scad b/filamenttrestle.scad
index e8417b0bed4c0389c97a79ea1fdc68b0d6cfeb44..d863f39c59511e957e59b1a674b3b81c7249cd65 100644 (file)
--- a/filamenttrestle.scad
+++ b/filamenttrestle.scad
@@ -1,8 +1,8 @@
 // -*- C -*-
 
-spoolwidth = 80; // fixme needs to be measured
-spoolinnerrad = 25; // fixme needs to be checked
-spoolouterrad = 60; // fixme needs to be checked
+spoolwidth = 88.0;
+spoolinnerrad = 39.8 / 2;
+spoolouterrad = spoolinnerrad + 61.5;
 
 include <doveclip.scad>
 include <axlepin.scad>
@@ -10,19 +10,19 @@ include <axlepin.scad>
 spoolradclear = 10;
 spoolradslop = 2;
 
-spoolinnerslop = 4.5;
+spoolinnerslop = 3;
 axleslop = 0.5;
 
 axlerad = 7;
 barwasherrad = 17;
 
-hubbasethick = 6;
-hubmainthick = 20;
-hubbaseweb = 2;
-hubbasestalkwidth = 6;
+hubbasethick = 4;
+hubmainthick = 15;
+hubbaseweb = 1.2;
+hubbasestalkwidth = 4;
 hubwalls = 2.5;
 hubpillarw = 4;
-hubbaserad = spoolinnerrad + 15;
+hubbaserad = spoolinnerrad + 10;
 hubmainrad = spoolinnerrad - spoolradslop;
 
 legw = 12;
@@ -32,21 +32,23 @@ plugh = 10;
 plugslope = 0.5;
 plugwmax = plugwmin + plugh * plugslope * 2;
 
+trestlefoot = 15;
+
 trestlelegw = 10;
 trestlebaseh = 10;
 trestleplugd = 1;
 
-topblockthick = 4;
+topblockthick = 3;
 topblockbasedepth = 5;
 
-pinbasew = 5.0;
-pinminh = 1.5;
-pinmaxh = 4.5;
-pindh = 0.50;
-pindwidth = 0.75;
+pinbasew = 4.0;
+pinminh = 1.0;
+pinmaxh = 3.5;
+pindh = 1.75;
+pindwidth = 1.75;
 
-pintaperlen = plugwmax * 0.85;
-pinstraightlen = 10;
+pintaperlen = 20;
+pinstraightlen = 30-pintaperlen;
 
 spoolouterpad = AxlePin_holerad()*2 * 1.5;
 spoolbarlen = spoolwidth +
@@ -100,7 +102,7 @@ module Bar(){ ////toplevel
     }
     translate([0,0,barz]) {
       translate([-100,0,0])
-       rotate([0,90,0]) cylinder(r=axlerad, h=200, $fn=30);
+       rotate([0,90,0]) cylinder(r=axlerad, h=200, $fn=60);
     }
   }
 }
@@ -132,20 +134,20 @@ module Trestle(){ ////toplevel
                            baseweb=true);
 
          translate([-trestlebase/2, -trestleheight, 0])
-           cylinder(r=trestlelegw/2*1.2, h=plugl);
+           cylinder(r=trestlelegw/2*1.2, h=trestlefoot);
        }
       }
       translate([-topblockw/2, -topblockbasedepth, 0])
        cube([topblockw,
              topblockbasedepth + plugh + topblockthick
-             + (pinmaxh - pinminh)*0.6 + pindh,
+             + (pinmaxh - pinminh)*0.5,
              plugl]);
 
       translate([-trestlebase/2, -trestleheight, 0])
        ExtenderPillars(length=trestlebase, width=trestlebaseh*2, height=legw);
     }
     translate([-300, -trestleheight-50, -1])
-      cube([600, 50, plugl+2]);
+      cube([600, 50, 52]);
 
     rotate([-90,-90,0])
       Plug(d=trestleplugd);
@@ -153,13 +155,13 @@ module Trestle(){ ////toplevel
     for (rot=[0,180]) {
       translate([0,0,plugl/2]) rotate([0,rot,0]) translate([0,0,-plugl/2]) {
        translate([0,
-                  plugh + pindh - (pinmaxh - pinminh)*0.75,
+                  plugh - (pinmaxh - pinminh)*1.00,
                   (plugl - pinholebasew*2)/3]) {
          translate([-(topblockw*0.25+1), 0, pinholebasew/2])
            rotate([-90,0,0]) %Pin();
          translate([-(topblockw+1), 0, 0]) {
            rotate([0,90,0]) {
-             linear_extrude(height = topblockw*1.0+2) {
+             linear_extrude(height = topblockw*2.0+2) {
                polygon([[-1.0 * pinholebasew, -0.01],
                         [-0.5 * pinholebasew, pinholeh],
                         [ 0                 , -0.01]]);
@@ -228,16 +230,18 @@ module HubEnd(){ ////toplevel
 
 
 module TestKit(){ ////toplevel
-  translate([30,0,0]) Pin();
-  translate([30,30,0]) Pin();
+  translate([60,0,0]) mirror([1,0,0]) Pin();
+  translate([60,15,0]) mirror([1,0,0]) Pin();
   translate([0,40,0]) intersection(){
     Trestle();
     translate([-50,-10,-1]) cube([100,100,100]);
   }
   intersection(){
-    translate([-60,0,0]) Bar();
+    translate([-60,10,0]) Bar();
     cube(50,center=true);
   }
+  %translate([50,40, AxlePin_zoffset()]) FtAxlePin();
+  %translate([0,-20,0]) AxleWasher();
 }
 
 module DemoSpool(){
@@ -248,7 +252,7 @@ module DemoSpool(){
     }
 }
 
-module Demo(){
+module Demo(){ ////toplevel
   color("blue") Bar();
   for (mir=[0,1]) {
     mirror([mir,0,0]) {
@@ -276,4 +280,4 @@ module Demo(){
 //Plug(d=1);
 //ExtenderPillars(80,12,8, baseweb=true);
 //HubEnd();
-Demo();
+//Demo();