filamenttrestle wip now triangular pins

[reprap-play.git] / filamenttrestle.scad

diff --git a/filamenttrestle.scad b/filamenttrestle.scad
index fac82b7f3c95e5e614a69100d7e4075fb8d0557e..4532c79867aef2be1c27adc1a9e4bebf67089e2e 100644 (file)
--- a/filamenttrestle.scad
+++ b/filamenttrestle.scad
@@ -1,6 +1,8 @@
 // -*- C -*-
 
 spoolwidth = 80; // fixme needs to be measured
+trestleheight = 80; // fixme needs to be checked
+trestlebase = 80; // fixme needs to be checked
 
 include <doveclip.scad>
 
@@ -9,8 +11,38 @@ barrady = 5;
 barradz = 7;
 guidewidth = 3;
 guiderad = 20;
-clipdepth = 16;
-clipcount = 3;
+
+plugl = 12;
+plugwmin = 3;
+plugh = 10;
+plugslope = 0.5;
+plugwmax = plugwmin + plugh * plugslope * 2;
+
+trestlelegw = 10;
+trestlebaseh = 10;
+trestleplugd = 1;
+
+topcylthick = 3;
+topcylbasedepth = 4;
+
+pinbasew = 3;
+pinminh = 1.0;
+pinmaxh = 3;
+pindh = 1.0;
+pindwidth = 1.0;
+
+module Plug(d=0){
+  a = -atan(plugslope);
+  tdx = d * cos(a);
+  tdy = d * sin(a);
+  bdx = d / cos(a);
+  translate([-d,0,0]) rotate([90,0,90]) linear_extrude(height=plugl+0.1+d*2){
+    polygon([[-(plugwmin/2 + bdx),  0],
+            [-(plugwmax/2 + tdx),  plugh + tdy],
+            [+(plugwmax/2 + tdx),  plugh + tdy],
+            [+(plugwmin/2 + bdx),  0]]);
+  }
+}
 
 module Bar(){
   spoolw = spoolwidth + spoolwidthgap*2;
@@ -26,11 +58,8 @@ module Bar(){
          translate([spoolw/2,0,0])
            rotate([0,90,0]) cylinder(r=guiderad, h=guidewidth, $fn=60);
        }
-       translate([spoolw/2 + guidewidth +
-                  DoveClipPairSane_width(clipcount)/2 - 0.1,
-                  clipdepth/2, -0.01])
-         rotate([90,90,0])
-           DoveClipPairSane(h=clipdepth, count=clipcount, baseextend=barrady);
+       translate([spoolw/2 + guidewidth, 0, 0])
+         Plug();
       }
     }
     translate([-biggestw/2, -50, 0])
@@ -38,4 +67,58 @@ module Bar(){
   }
 }
 
-Bar();
+module Trestle(){
+  legang = atan2(trestlebase/2, trestleheight);
+  eplen = sqrt(trestleheight*trestleheight + trestlebase*trestlebase*0.25);
+  topcylw = plugwmax + topcylthick*2;
+
+  pinholebasew = pinbasew + pindwidth;
+  pinholeh =     pinminh +  pindh;
+
+  difference(){
+    union(){
+      for (mir=[0,1]) {
+       mirror([mir,0,0]) {
+         rotate([0,0, -90-legang])
+           ExtenderPillars(length=eplen+trestlelegw,
+                           width=trestlelegw,
+                           height=plugl,
+                           baseweb=true);
+
+         translate([-trestlebase/2, -trestleheight, 0])
+           cylinder(r=trestlelegw/2*1.2, h=plugl);
+       }
+      }
+      translate([-topcylw/2, -topcylbasedepth, 0])
+       cube([topcylw, topcylbasedepth + plugh + topcylthick, plugl]);
+
+      translate([-trestlebase/2, -trestleheight, 0])
+       ExtenderPillars(length=trestlebase, width=trestlebaseh*2, height=plugl);
+    }
+    translate([-300, -trestleheight-50, -1])
+      cube([600, 50, plugl+2]);
+
+    rotate([-90,-90,0])
+      Plug(d=trestleplugd);
+
+    for (rot=[0,180]) {
+      translate([0,0,plugl/2]) rotate([0,rot,0]) translate([0,0,-plugl/2]) {
+       translate([-(topcylw*0.25+1),
+                  plugh,
+                  (plugl - pinholebasew*2)/3]) rotate([0,90,0]) {
+         linear_extrude(height = topcylw*1.0+2) {
+           polygon([[-1.0 * pinholebasew, -0.01],
+                    [-0.5 * pinholebasew, pinholeh],
+                    [ 0                 , -0.01]]);
+         }
+       }
+      }
+    }
+  }
+}
+
+//Bar();
+Trestle();
+
+//Plug(d=1);
+//ExtenderPillars(80,12,8, baseweb=true);