//
// This file (and its includes) can generate:
//
-// - Heavy duty 4-armed spool suitable for holding a 100m
-// Faberdashery coil on the spool arm of a Lulzbot TAZ-5.
+// ===== Heavy duty 4-armed spool for 3mm x 100m coil =====
+//
+// A heavy duty 4-armed spool suitable for holding a 100m
+// Faberdashery coil on the spool arm of a Lulzbot TAZ-5.
//
// Set
// fdia=2.85
//
// You will also need 4 x M4 machine screws and nuts.
//
-// - Light duty 3-armed spool suitable for up to around 30m
-// of Faberdashery 2.85mm PLA.
+// This is the default.
+//
+// ===== Light duty 3-armed spool for 3mm x <=30m coil =====
+//
+// A light duty 3-armed spool suitable for up to around 30m
+// of Faberdashery 2.85mm PLA.
//
// Set
// fdia=2.85
// lightduty=true
+// (or look in filamentspool-lt.scad).
+//
// And print following parts
// Hub
// ArmEnd x 3
// (note that the light duty and heavy duty CupSecuringClips
// are slightly different)
//
+// ===== Notes regarding both the above spools =====
+//
// When mounting either spool on the TAZ-5 spool arm, put the `pointy'
// end of the hub towards the printer - ie, put put the spool on
// `backwards'. This ensures that the spool's arms will clear the
//
// For the above, I generally used the Cura `Standard' PLA profile.
//
-// - Storage arm suitable for screwing to walls, bookshelves,
-// etc. (requires non-countersunk M4 screws); will hold two
-// heavy duty spools each with a 100m coil.
+// ===== TAZ-5 feed tube adjustment kit =====
+//
+// With a TAZ-5 I recommend using this kit to improve the feed
+// reliability:
+//
+// Set
+// fdia=2.85
+// And print following parts
+// FilamentGuideSpacer (ideally, at `high detail')
+// FilamentGuideArmPrint (optional; `high detail' or `standard')
+//
+// And possibly also
+// t-nut_jig_0.2.stl
+// from Aleph Objects - look here:
+// http://download.lulzbot.com/TAZ/accessories/tool_heads/version_2/Dual_Extruder_v2/production_parts/stl/
+//
+// The spacer clips onto the filament guide tube holder arm, on the
+// inside, with the pointy flanged end towards the filament guide
+// tube. It stops the filament guide tube angle (and so the
+// filament's natural pickup location) changing as the print head moves.
+//
+// The FilamentGuideArm[Print] is a replacement for the arm supplied
+// with your TAZ-5. It's longer, so that the filament pickup point is
+// closer to the middle of the coil. Use the t-nut_jig to stop the
+// T-nuts in the aluminium channel from annoyingly sliding down to the
+// bottom while you swap out the arm.
+//
+// (Faberdashery coils, and therefore both the above spools, have a
+// larger diameter than the flat-walled spools often supplied by other
+// vendors. And the spools above have individual arms rather than a
+// continuous disc. If the filament `unhooks' from the arm, it can
+// pull taught around the hub and stop feeding properly.)
+//
+// ===== Spool storage arm, for mounting on walls =====
+//
+// A storage arm suitable for screwing to walls, bookshelves,
+// etc. (requires non-countersunk M4 screws); will hold two heavy duty
+// spools each with a 100m coil.
//
// Set
// fdia=2.85
// lightduty=false
+// (or look in filamentspool-sm.scad).
+//
// And print one of these, according to taste
// StorageArmLeft
// StorageArmRight
// For the above, I used the Cura `High detail' PLA profile because
// I wanted it pretty, but the `Standard' profile should do fine.
//
-// - Spool (in many parts) for handing 1.75mm filament, printable
-// on, and with parts for mounting on, a Reprappro Huxley.
+// ===== Spools for 1.75mm filament =====
+//
+// Spool (in many parts) for handing 1.75mm filament, printable
+// on, and with parts for mounting on, a Reprappro Huxley.
fdia=2.85; // or 1.75
exteffrad = 70;
hubeffrad = selsz(30, 82, 40);
hubbigrad = selsz(20, 38, 38);
-hublwidth = selsz(3, 2.5, 4);
+hublwidth = selsz(3, 2.5, 3.0);
hubstemwidth = 2;
hublthick = 10;
hubaxlerad = selsz(5, 28/2, 28/2);
armendwallthick=selsz(2.5, 1.8, 2.5);
armendbasethick=selsz(1.2, 1.2, 1.2);
+numbers_relief = 0.7;
+numbers_tick_len = 8;
+numbers_tick_width = 0.75;
+numbers_tick_linespc = 1.0;
+numbers_height_allow = 8;
+
axlehorizoffset = 12.5;
axlevertheight = 100;
towercliph = 16;
include <cliphook.scad>
include <filamentteeth.scad>
include <axlepin.scad>
+include <commitid.scad>
+
+hub_clip_baseextend = (hubeffrad - DoveClip_depth()
+ - hubbigrad + hublwidth);
+
+real_exteffrad = selsz(exteffrad + hub_clip_baseextend,
+ hubeffrad + DoveClip_depth(),
+ hubeffrad + nondove_armbase);
channelwidth = prongthick + channelslop;
channeldepth = prongwidth + ratchettoothheight;
totalheight = channeldepth + armendbasethick;
stalkwidth = prongwidth + prongstalkxwidth;
+tau = PI*2;
+
module ArmEnd(length=armend_length){ ////toplevel
if (usedove()) {
translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
-armendwallthick + totalwidth/2,
-armendbasethick -1])
cylinder(r= nondove_armhole_hole/2, h=totalheight+2, $fn=10);
+ translate([-nondove_armbase, -armendwallthick, -armendbasethick])
+ rotate([90,0,0])
+ Commitid_BestCount([nondove_armbase, totalwidth]);
}
}
difference(){
- translate([0, -armendwallthick, -armendbasethick])
- cube([length, totalwidth, totalheight]);
- translate([-1, 0, 0])
- cube([length+1 - ratchettooth, channelwidth, channeldepth+1]);
- translate([-1, 0, ratchettoothheight])
- cube([length+2, channelwidth, channeldepth+1]);
- }
- for (dx = [0 : ratchetstep : length - ratchetstep]) translate([dx,0,0]) {
- translate([ratchettoothsmoothr+0.5, armendwallthick/2, 0]) minkowski(){
- rotate([90,0,0])
- cylinder($fn=20, r=ratchettoothsmoothr, h=armendwallthick);
- multmatrix([ [ 1, 0, ratchettoothslope, 0 ],
- [ 0, 1, 0, 0 ],
- [ 0, 0, 1, 0 ],
- [ 0, 0, 0, 1 ]])
- cube([ratchettooth - ratchettoothsmoothr*2,
- channelwidth, ratchettoothheight - ratchettoothsmoothr]);
+ union(){
+ difference(){
+ translate([0, -armendwallthick, -armendbasethick])
+ cube([length, totalwidth, totalheight]);
+ translate([-1, 0, 0])
+ cube([length+1 - ratchettooth, channelwidth, channeldepth+1]);
+ translate([-1, 0, ratchettoothheight])
+ cube([length+2, channelwidth, channeldepth+1]);
+ }
+ for (dx = [0 : ratchetstep : length - ratchetstep]) translate([dx,0,0]) {
+ translate([ratchettoothsmoothr+0.5, armendwallthick/2, 0]) minkowski(){
+ rotate([90,0,0])
+ cylinder($fn=20, r=ratchettoothsmoothr, h=armendwallthick);
+ multmatrix([ [ 1, 0, ratchettoothslope, 0 ],
+ [ 0, 1, 0, 0 ],
+ [ 0, 0, 1, 0 ],
+ [ 0, 0, 0, 1 ]])
+ cube([ratchettooth - ratchettoothsmoothr*2,
+ channelwidth, ratchettoothheight - ratchettoothsmoothr]);
+ }
+ }
+ }
+
+ for (otherside=[0,1]) {
+ for (circum = [300:100:1500]) {
+ assign(rad = circum / tau)
+ assign(fn = str("filamentspool-number-n",circum,".dxf"))
+ assign(rotateoffset = [0, totalwidth/2, 0])
+ assign(xlen = rad - real_exteffrad) {
+ if (xlen >= numbers_tick_width/2
+ + (otherside ? numbers_height_allow : 0) &&
+ xlen <= length - (otherside ? 0 : numbers_height_allow))
+ translate([xlen, -armendwallthick,
+ -armendbasethick + (totalheight - numbers_tick_len)/2])
+ translate(rotateoffset)
+ rotate([0,0, otherside*180])
+ translate(-rotateoffset){
+ translate([-numbers_tick_width/2, -1, 0])
+ cube([numbers_tick_width, numbers_relief+1, numbers_tick_len]);
+ translate([numbers_tick_width/2 + numbers_tick_linespc,
+ 1,
+ numbers_tick_len])
+ rotate([90,0,0])
+ rotate([0,0,-90])
+ linear_extrude(height= numbers_relief+1)
+ // scale(templatescale)
+ import(file=fn, convexity=100);
+ }
+ }
+ }
+ }
+
+ if (usedove()){
+ translate([0, -armendwallthick, -armendbasethick])
+ Commitid_BestCount_M([length/3, totalwidth]);
}
}
}
}
}
-module FilamentCup() { ////toplevel
+module FilamentCupPositive() {
FilamentCupHandle();
gapy = prongwidth;
}
}
+module FilamentCup() { ////toplevel
+ difference(){
+ FilamentCupPositive();
+ translate([0, -stalkwidth, 0])
+ Commitid_BestCount_M([stalklength - stalkwidth, stalkwidth]);
+ }
+}
+
module CupSecuringClipSolid(w,d,h1,h2){
rotate([0,-90,0]) translate([0,-h1/2,-w/2]) linear_extrude(height=w) {
polygon(points=[[0,0], [d,0], [d,h2], [0,h1]]);
difference() {
translate([hubeffrad,0,0])
DoveClipPairSane(h=doveclipheight,
- baseextend = (hubeffrad - DoveClip_depth()
- - hubbigrad + hublwidth));
+ baseextend = hub_clip_baseextend);
if (hole>hublwidth && holewidth > 2) {
translate([hubbigrad + hublwidth, -holewidth/2, -1])
cube([hole, holewidth, hublthick+2]);
}
}
translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
+
+ rotate([0,0, selsz(0,0,45)])
+ translate([axlerad+hublwidth,
+ -hublwidth/2,
+ 0])
+ rotate([90,0,0])
+ Commitid_BestCount([(hubbigrad-hublwidth) - (axlerad+hublwidth),
+ hublthick +
+ hublwidth/2 * hubaxlelen/(hubbigrad-axlerad),
+ ]);
}
}
FilamentGuideArm();
}
-module Demo(){
- translate([-hubeffrad-30,50,0]) Hub();
+module Demo(){ ////toplevel
+ translate([-real_exteffrad,-20,0]) Hub();
ArmEnd();
- translate([0,50,0]) FilamentCup();
+ translate([ratchettooth*2, 30, 0]) FilamentCup();
+ if (selsz(true,false,false)) {
+ translate([-exteffrad + hubeffrad - hub_clip_baseextend, -10, 0])
+ ArmExtender();
+ }
}
//ArmEnd();
~ianmdlvl / reprap-play.git / blobdiff