// -*- C -*-
-fdia=2.85;
-lightduty=false;
+// filamentspool.scad
+// 3D design for filament spools to hold coils as supplied by Faberdashery
+//
+
+//
+// Copyright 2012,2013,2016 Ian Jackson
+//
+// This work is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This work is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this work. If not, see <http://www.gnu.org/licenses/>
+//
+
+//
+// Each spool is a hub with 3 or 4 arms. Each arm has a cup for
+// holding the filament. The effective diameter can be adjusted by
+// setting the cup into a different seat in the arm. The cups are
+// held on with simple clips, so the filement coil can easily be
+// removed and replaced.
+//
+// This file (and its includes) can generate:
+//
+// - Heavy duty 4-armed spool suitable for holding a 100m
+// Faberdashery coil on the spool arm of a Lulzbot TAZ-5.
+//
+// Set
+// fdia=2.85
+// lightduty=false
+// And print following parts
+// Hub
+// ArmEnd x 4
+// FilamentCup x 4 (or FilamentCupPair x 2)
+// CupSecuringClip x 4
+//
+// You will also need 4 x M4 machine screws and nuts.
+//
+// - Light duty 3-armed spool suitable for up to around 30m
+// of Faberdashery 2.85mm PLA.
+//
+// Set
+// fdia=2.85
+// lightduty=true
+// And print following parts
+// Hub
+// ArmEnd x 3
+// FilamentCup x 3 (or FilamentCup + FilamentCupPair)
+// CupSecuringClip x 3
+// TowerDoveClipPin x 6
+//
+// When assembling, insert one TowerDoveClipPin from each side,
+// joining each ArmEnd to the Hub with two TowerDoveClipPins.
+// Modest force with pliers is good to seat them properly.
+//
+// (note that the light duty and heavy duty CupSecuringClips
+// are slightly different)
+//
+// When mounting either spool on the TAZ-5 spool arm, put the `pointy'
+// end of the hub towards the printer - ie, put put the spool on
+// `backwards'. This ensures that the spool's arms will clear the
+// printer framework.
+//
+// For the above, I generally used the Cura `Standard' PLA profile.
+//
+// - Storage arm suitable for screwing to walls, bookshelves,
+// etc. (requires non-countersunk M4 screws); will hold two
+// heavy duty spools each with a 100m coil.
+//
+// Set
+// fdia=2.85
+// lightduty=false
+// And print one of these, according to taste
+// StorageArmLeft
+// StorageArmRight
+//
+// NB that the `light duty' version of this is shorter and
+// will only take two `light duty' spools.
+//
+// For the above, I used the Cura `High detail' PLA profile because
+// I wanted it pretty, but the `Standard' profile should do fine.
+//
+// - Spool (in many parts) for handing 1.75mm filament, printable
+// on, and with parts for mounting on, a Reprappro Huxley.
+
+
+fdia=2.85; // or 1.75
+lightduty=false; // or true
+
slop=0.5;
bigslop=slop*2;
storarm_screw_hole_slop = 0.5;
storarm_besides_hole = 4;
+storarm_under_hole = 5;
+storarm_screw_hole_head = 8.8;
+storarm_screw_hole_head_slop = 1.5;
+
// calculated
storarm_axlerad = hubaxlerad - storarm_axleslop;
-storarm_mainlen = hubaxlelen + (storarm_cope_hubaxle_mk1 ? 10 : 0);
+storarm_mainlen = hubaxlelen*2 + storarm_axleslop
+ + (storarm_cope_hubaxle_mk1 ? 10 : 0);
storarm_totlen = storarm_mainlen + storarm_hooklen;
storarm_mid_off_y = storarm_axlerad;
}
}
-module StorageArm(){ ////toplevel
+module StorageArmRight(){ ////toplevel
shear = storarm_hookheight / (storarm_mainlen/2);
StorageArmDiagPart(-1, storarm_mainlen/2+1, shear, 0);
StorageArmDiagPart(-1, 0, shear, 0);
}
StorageArmAtMountingHoles(){
- cylinder(r=1, h=10);
+ cylinder(r= storarm_screw_hole_head/2,
+ h=10);
+ }
+ }
+ StorageArmAtMountingHoles(){
+ translate([0,0,-1])
+ cylinder(r= (storarm_screw_hole + storarm_screw_hole_slop)/2 ,
+ h=20);
+ translate([0,0,storarm_under_hole])
+ cylinder(r= (storarm_screw_hole_head + storarm_screw_hole_head_slop)/2,
+ h=20);
+ }
+ }
+}
+
+module StorageArmLeft(){ ////toplevel
+ mirror([1,0,0]) StorageArmRight();
+}
+
+module StorArmHoleTest(){ ////toplevel
+ sz = storarm_screw_hole_head + storarm_besides_hole*2;
+ intersection(){
+ StorageArmRight();
+ translate([-50, -storarm_base_off_y, -1])
+ cube([100, sz, sz+1]);
+ }
+}
+
+
+//----- filament guide spacer -----
+
+guide_armdia = 15.0;
+guide_armwidth = 10.2;
+
+guidefilclip_outerdia = 22.8;
+
+guidespacer_armslop = 0.75;
+
+guidespacer_prongprotrude = 4;
+guidespacer_thick = 1.6;
+guidespacer_len = 15.3 + 0.75;
+
+// calculated
+
+guidespacer_armdia = guide_armdia + guidespacer_armslop;
+guidespacer_armwidth = guide_armwidth + guidespacer_armslop;
+
+guidespacer_wingheight = (guidefilclip_outerdia - guidespacer_armdia)/2;
+
+module FilamentGuideArmTemplate(extra=0){
+ intersection(){
+ circle(r= (guidespacer_armdia/2) + extra);
+ square(center=true, [guidespacer_armwidth+extra*2,
+ guidespacer_armdia + extra*2 + 10]);
+ }
+}
+
+module FilamentGuideSpacerInnerTemplate(){
+ FilamentGuideArmTemplate();
+ translate([0, -guidespacer_armdia/2])
+ square(center=true, [guidespacer_armwidth - guidespacer_prongprotrude,
+ guidespacer_armdia]);
+}
+
+module FilamentGuideSpacer(){ ////toplevel
+ difference(){
+ union(){
+ linear_extrude(height= guidespacer_len)
+ FilamentGuideArmTemplate(extra= guidespacer_thick);
+ for (angle=[26, 60]) {
+ for (m=[0,1]) {
+ mirror([m,0,0]) {
+ rotate([0,0,angle]) {
+ hull(){
+ for (t=[[0, guidespacer_wingheight],
+ [guidespacer_len-1, -guidespacer_wingheight]])
+ translate([0,0, t[0] + 0.5])
+ cube([guidespacer_thick, guidespacer_armdia + t[1]*2,
+ 1],
+ center=true);
+ }
+ }
+ }
+ }
}
}
+ translate([0,0,-1])
+ linear_extrude(height= guidespacer_len+5)
+ FilamentGuideSpacerInnerTemplate();
}
}
//AxleWasher();
//AxlePin();
//AxleFrictionWasher();
-StorageArm();
+//StorageArmLeft();
+//StorArmHoleTest();
//Demo();
~ianmdlvl / reprap-play.git / blobdiff