doveclip remove debugging echo

[reprap-play.git] / filamentspool.scad

diff --git a/filamentspool.scad b/filamentspool.scad
index 50994b5d8f8d912e711379507e9f4447839e3a45..89f3cfb3a0ac97e069efddde6a57a01fd7fb87d7 100644 (file)
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -5,7 +5,7 @@ fdia=1.75;
 slop=0.5;
 bigslop=slop*2;
 
-exteffrad = 85;
+exteffrad = 70;
 hubeffrad = 30;
 hubbigrad = 20;
 hublwidth = 3;
@@ -57,6 +57,9 @@ towercliph = 16;
 towerclipcount = 3;
 towerpillarw = 5;
 
+axlepinrad = 2;
+axlepintabrad = 5;
+
 washerthick = 1.2;
 washerrad = hubaxlerad + 7.5;
 
@@ -239,7 +242,16 @@ module ArmExtender(){ ////toplevel
 }
 
 module AxlePin(){ ////toplevel
-//  SplitPin();
+  pinr = axlepinrad - slop;
+  intersection(){
+    translate([0, 0, pinr*0.7]) {
+      translate([0, -washerrad, 0]) rotate([-90,0,0])
+       cylinder(r=pinr, h=washerrad*2, $fn=10);
+      translate([-axlepintabrad, hubaxlerad, -axlepinrad])
+       cube([axlepintabrad*2, axlepinrad*2, axlepinrad*2]);
+    }
+    translate([-50,-50,0]) cube([100,100,50]);
+  }
 }
 
 module Axle(){ ////toplevel
@@ -263,27 +275,27 @@ if(0)
   joinbelowallow = 3;
 
   intersection(){
-    difference() {
-      translate([0, 0, shift])
-      %union(){
-       translate([-1, 0, 0])
-         rotate([0,90,0])
-         cylinder(r = axlerad, h = 1 + axleclearlen + 3 + 2);
-       mirror([1,0,0]) rotate([0,90,0])
-         cylinder(r = washerrad, h = 3);
-if(0)
-       intersection(){
+    translate([0, 0, shift]) {
+      difference() {
+       union(){
+         translate([-1, 0, 0])
+           rotate([0,90,0])
+           cylinder(r = axlerad, h = 1 + axleclearlen + 3 + 2);
          mirror([1,0,0]) rotate([0,90,0])
-           cylinder(r = towercliph - shift,
-                    h = pillarswidth/2 + axlehorizoffset);
-         translate([-50, -joinbelowallow, -50])
-           cube([100, joinbelowallow+50, 100]);
+           cylinder(r = washerrad, h = 3);
+if(0)
+         intersection(){
+           mirror([1,0,0]) rotate([0,90,0])
+             cylinder(r = towercliph - shift,
+                      h = pillarswidth/2 + axlehorizoffset);
+           translate([-50, -joinbelowallow, -50])
+             cube([100, joinbelowallow+50, 100]);
+         }
        }
+       rotate([90,0,0])
+       translate([axleclearlen + axlepinrad/2, 0, -25])
+         cylinder(r=axlepinrad, h=50);
       }
-      translate([axleclearlen, 0, 0])
-       mirror([0,0,1])
-       rotate([0,0,90])
-       cube([1,1,1]);
     }
     translate([-50,-50,0]) cube([100,100,100]);
   }
@@ -303,4 +315,4 @@ module AxleWasher(){ ////toplevel
 //ArmExtender();
 //Axle();
 //AxleWasher();
-//AxleSplitPin();
+//AxlePin();