// -*- C -*-
fdia=2.85;
+lightduty=true;
slop=0.5;
bigslop=slop*2;
-function selsz(sm,lg) = fdia < 2 ? sm : lg;
-function usedove() = selsz(true,false);
+function selsz(sm,lt,lg) = fdia < 2 ? sm : lightduty ? lt : lg;
+function usedove() = selsz(true,true,false);
+
+num_arms = selsz(3,3,4);
+
+channelslop=selsz(slop,slop,slop);
exteffrad = 70;
-hubeffrad = selsz(30, 60);
-hubbigrad = selsz(20, 50);
-hublwidth = selsz(3, 5);
+hubeffrad = selsz(30, 82, 40);
+hubbigrad = selsz(20, 38, 38);
+hublwidth = selsz(3, 2.5, 4);
hubstemwidth = 2;
hublthick = 10;
-hubaxlerad = selsz(5, 17/2);
+hubaxlerad = selsz(5, 28/2, 28/2);
totalheightfromtower = 240;
axletowerfudgebend = 0;
axleaxlefudgebend = 3;
axlepadlen = 1.0;
-prongthick=selsz(5,7);
-prongwidth=selsz(5,7);
+armend_length = 120;
+
+prongthick=selsz(5,4,5);
+prongwidth=selsz(5,4,5);
+prongribwidth=3;
+prongribheight=selsz(0,0,4);
ratchetstep=15;
ratchettooth=3;
ratchettoothheight=5;
ratchettoothsmoothr=1;
ratchettoothslope=0.75;
overlap=0.5;
-cupwidth=selsz(40,60);
-cupheight=selsz(55,75);
+cupwidth=selsz(40,25,50);
+cupheight=selsz(55,25,55);
-propxshift = 0;
+cupstrong_dx=selsz(0,0,-10);
+
+propxshift = -6;
doveclipheight = 10;
prongstalkxwidth=3;
-stalklength=selsz(35,55);
+stalklength=selsz(35,25,55);
overclipcupgap=5;
overclipdepth=15;
overcliproundr=2.0;
overclipthick=1.0;
-overclipcupnextgap=20;
+overclipcupnextgap=selsz(20,15,20);
-hubaxlelen = selsz(25, cupwidth);
+hubaxlelen = selsz(25, 62.5, 87.5);
+echo(hubaxlelen);
overclipsmaller=-2.5;
overclipbigger=0.0;
-wingspoke=3;
+wingspoke=2.5;
wingsize=6;
wingthick=3;
-armendwallthick=2.5;
-armendbasethick=1.2;
+armendwallthick=selsz(2.5, 1.8, 2.5);
+armendbasethick=selsz(1.2, 1.2, 1.2);
axlehorizoffset = 12.5;
axlevertheight = 100;
ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
-nondove_armbase = 100;
-nondove_armhole_x = 60;
-nondove_armhole_hole = 4;
+nondove_armhole_x = 32;
+nondove_armhole_hole = 4 + 0.8;
+nondove_armhole_support = 7;
+nondove_armhole_wall = 3.2;
+nondove_armhole_slop = 0.5;
+nondove_armhole_slop_x = 0.5;
+
+nondove_armbase = nondove_armhole_x + nondove_armhole_hole/2 +
+ nondove_armhole_support;
+echo(nondove_armbase);
include <doveclip.scad>
include <cliphook.scad>
include <filamentteeth.scad>
include <axlepin.scad>
-channelwidth = prongthick + slop;
+channelwidth = prongthick + channelslop;
channeldepth = prongwidth + ratchettoothheight;
totalwidth = armendwallthick*2 + channelwidth;
totalheight = channeldepth + armendbasethick;
stalkwidth = prongwidth + prongstalkxwidth;
-module ArmEnd(length=120){ ////toplevel
+module ArmEnd(length=armend_length){ ////toplevel
if (usedove()) {
translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
rotate([0,0,-90])
module FilamentCupCup(){
for (my=[0,1]) mirror([0,my,0]) {
- translate([0,cupwidth/2,0])
+ translate([0, cupwidth/2, 0])
cube([cupheight + prongwidth, prongwidth, prongthick]);
}
}
gapy = prongwidth;
dy = cupwidth/2 + gapy + overclipcupgap;
+ baselen = dy+cupwidth/2;
translate([0, dy, 0])
FilamentCupCup();
- translate([0, -1, 0]);
- cube([prongwidth, dy+1+cupwidth/2, prongthick]);
+ cube([prongwidth, baselen+1, prongthick]);
+
+ translate([cupstrong_dx, prongwidth, 0]) {
+ cube([prongwidth, baselen-prongwidth, prongthick]);
+ for (y = [0, .33, .67, 1])
+ translate([0, (baselen - prongwidth) * y, 0])
+ cube([-cupstrong_dx + 1, prongwidth, prongthick]);
+ }
+ if (cupstrong_dx != 0) {
+ rotate([0,0,45])
+ translate([-prongwidth*.55, -prongwidth*2.1, 0])
+ cube([prongwidth*(2.65), prongwidth*4.2, prongthick]);
+ }
+
+ translate([0, -0.2, 0])
+ cube([prongribwidth, baselen, prongthick + prongribheight]);
+
+ if (prongribheight > 0) {
+ translate([-prongwidth, baselen, 0])
+ cube([cupheight/2, prongwidth + prongribheight, prongribwidth]);
+ }
midrad = cupwidth/2 + prongwidth/2;
prongthick]);
}
for (y = [overclipcupgap, overclipcupgap+overclipcupnextgap]) {
- translate([0, y, 0])
+ translate([cupstrong_dx, y + prongwidth, 0])
rotate([0,0, 102 + fdia])
FilamentTeeth(fdia=fdia, h=teethh);
}
for (x = [-0.3, -1.3]) {
- translate([cupheight + overclipcupnextgap*x, dy+cupwidth/2 + prongthick, 0])
+ translate([cupheight + overclipcupnextgap*x, baselen + prongwidth, 0])
rotate([0,0, 12 + fdia])
FilamentTeeth(fdia=fdia, h=teethh);
}
xmax = hubbigrad-hublwidth/2;
hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
holewidth = DoveClipPairSane_width() - hubstemwidth*2;
+ nondove_allwidth = nondove_armhole_wall*2 + totalwidth;
difference(){
union(){
- difference(){
- cylinder($fn=60, h=hublthick, r=hubbigrad);
- translate([0,0,-1])
- cylinder($fn=30, h=hublthick+2, r=(hubbigrad-hublwidth));
- }
- cylinder(h=hubaxlelen, r=axlerad+hublwidth);
- for (ang=[0,120,240])
- rotate([0,0,ang]) {
- difference() {
- translate([hubeffrad,0,0])
- DoveClipPairSane(h=doveclipheight,
- baseextend = (hubeffrad - DoveClip_depth()
- - hubbigrad + hublwidth));
- if (hole>hublwidth && holewidth > 2) {
- translate([hubbigrad + hublwidth, -holewidth/2, -1])
- cube([hole, holewidth, hublthick+2]);
- }
+ difference(){
+ cylinder($fn=60, h=hublthick, r=hubbigrad);
+ translate([0,0,-1])
+ cylinder($fn=30, h=hublthick+2, r=(hubbigrad-hublwidth));
}
+ cylinder(h=hubaxlelen, r=axlerad+hublwidth);
+ for (ang=[0 : 360/num_arms : 359])
+ rotate([0,0,ang]) {
+ if (usedove()){
+ difference() {
+ translate([hubeffrad,0,0])
+ DoveClipPairSane(h=doveclipheight,
+ baseextend = (hubeffrad - DoveClip_depth()
+ - hubbigrad + hublwidth));
+ if (hole>hublwidth && holewidth > 2) {
+ translate([hubbigrad + hublwidth, -holewidth/2, -1])
+ cube([hole, holewidth, hublthick+2]);
+ }
+ }
+ } else {
+ difference(){
+ translate([0,
+ -nondove_allwidth/2,
+ 0])
+ cube([hubeffrad + nondove_armhole_x
+ + nondove_armhole_hole/2 + nondove_armhole_support,
+ nondove_allwidth,
+ nondove_armhole_wall + totalheight]);
+ translate([hubeffrad - nondove_armhole_slop_x,
+ -nondove_allwidth/2
+ + nondove_armhole_wall - nondove_armhole_slop,
+ nondove_armhole_wall])
+ cube([nondove_armhole_x + 50,
+ totalwidth + nondove_armhole_slop*2,
+ totalheight + 1]);
+ translate([hubeffrad + nondove_armhole_x, 0, -20])
+ cylinder(r= nondove_armhole_hole/2, h=50, $fn=10);
+ }
+ }
+ }
+ for (ang = [0 : 180/num_arms : 359])
+ rotate([0,0,ang]) rotate([90,0,0]) {
+ translate([0,0,-hublwidth/2])
+ linear_extrude(height=hublwidth)
+ polygon([[xmin,0.05], [xmax,0.05],
+ [xmax,hublthick-0.2], [xmin, hubaxlelen-0.2]]);
+ }
}
- for (ang = [0 : 60 : 359])
- rotate([0,0,ang]) rotate([90,0,0]) {
- translate([0,0,-hublwidth/2])
- linear_extrude(height=hublwidth)
- polygon([[xmin,0.05], [xmax,0.05],
- [xmax,hublthick-0.2], [xmin, hubaxlelen-0.2]]);
- }
-}
translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
}
}
rotate([0,0,180]) FilamentCup();
}
+module Demo(){
+ translate([-hubeffrad-30,50,0]) Hub();
+ ArmEnd();
+ translate([0,50,0]) FilamentCup();
+}
+
//ArmEnd();
//FilamentCup();
//FilamentCupPair();
//CupSecuringClip();
-Hub();
+//Hub();
//ArmExtender();
//Axle();
//AxleWasher();
//AxlePin();
//AxleFrictionWasher();
+//Demo();
~ianmdlvl / reprap-play.git / blobdiff