chiark / gitweb /
anke-gps-bracket: NestleCube: add NestleCubeBaseTest
[reprap-play.git] / filamentspool.scad
index a0381de..34e2f82 100644 (file)
@@ -44,6 +44,7 @@ overclipcupgap=5;
 overclipdepth=15;
 overcliproundr=2.0;
 overclipthick=0.5;
+overclipcupnextgap=20;
 
 overclipsmaller=-2.5;
 overclipbigger=0.0;
@@ -65,13 +66,18 @@ axlepinrad = 2;
 axlepintabrad = 5;
 
 washerthick = 1.2;
+washerthinthick = 0.8;
+washerverythinthick = 0.4;
 washerrad = hubaxlerad + 7.5;
+frictionwasherarmwidth = 3;
+frictionwasherextrapush = 1.0;
 
 ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
 
 include <doveclip.scad>
 include <cliphook.scad>
 include <filamentteeth.scad>
+include <axlepin.scad>
 
 channelwidth = prongthick + slop;
 channeldepth = prongwidth + ratchettoothheight;
@@ -163,9 +169,11 @@ module FilamentCup() { ////toplevel
          dy - sqrt(midrad*midrad - proptaken*proptaken) - prongwidth/2,
          prongthick]);
   }
-  translate([0, overclipcupgap, 0])
-    rotate([0,0, 102 + fdia])
-    FilamentTeeth(fdia=fdia, h=teethh);
+  for (y = [overclipcupgap, overclipcupgap+overclipcupnextgap]) {
+    translate([0, y, 0])
+      rotate([0,0, 102 + fdia])
+      FilamentTeeth(fdia=fdia, h=teethh);
+  }
 }
 
 module CupSecuringClipSolid(w,d,h1,h2){
@@ -202,6 +210,10 @@ module ArmDoveClipPin(){ ////toplevel
   DoveClipPin(h=doveclipheight);
 }
 
+module TowerDoveClipPin(){ ////toplevel
+  DoveClipPin(h=towercliph/2);
+}
+
 module Hub(){ ////toplevel
   difference(){
     cylinder($fn=60, h=hublthick, r=hubbigrad);
@@ -245,23 +257,13 @@ module ArmExtender(){ ////toplevel
                   hb=doveclipheight);
 }
 
-module AxlePin(){ ////toplevel
-  pinr = axlepinrad - slop;
-  intersection(){
-    translate([0, 0, pinr*0.7]) {
-      translate([0, -washerrad, 0]) rotate([-90,0,0])
-       cylinder(r=pinr, h=washerrad*2, $fn=10);
-      translate([-axlepintabrad, hubaxlerad, -axlepinrad])
-       cube([axlepintabrad*2, axlepinrad*2, axlepinrad*2]);
-    }
-    translate([-50,-50,0]) cube([100,100,50]);
-  }
+module FsAxlePin(){ ////toplevel
+  AxlePin(hubaxlerad, washerrad*2, axlepinrad, axlepintabrad, slop);
 }
 
 module Axle(){ ////toplevel
   pillarswidth = DoveClipPairSane_width(towerclipcount);
 
-if(0)
   rotate([0,0, -( axleaxlefudgebend + atan(slop/hubaxlelen) ) ])
   translate([-axlehorizoffset, -axlevertheight, 0]) {
     rotate([0,0,-axletowerfudgebend])
@@ -297,7 +299,7 @@ if(0)
              rotate([0,90,0])
              cylinder($fn=60,
                       r = towercliph - shift,
-                      h = pillarswidth * 0.5); // fixme 0.5 is bogus
+                      h = pillarswidth);
            translate([-50, -joinbelowallow, -50])
              cube([100, joinbelowallow+50, 100]);
          }
@@ -311,11 +313,41 @@ if(0)
   }
 }
 
+module washer(thick){
+  Washer(hubaxlerad, washerrad, thick, slop);
+}
+
 module AxleWasher(){ ////toplevel
+  washer(thick=washerthick);
+}
+
+module AxleThinWasher(){ ////toplevel
+  washer(thick=washerthinthick);
+}
+
+module AxleVeryThinWasher(){ ////toplevel
+  washer(thick=washerverythinthick);
+}
+
+module AxleFrictionWasher(){ ////toplevel
   difference(){
     cylinder(h=washerthick, r=washerrad);
     translate([0,0,-1]) cylinder(h=washerthick+2, r=hubaxlerad+slop);
   }
+  frarmr = hubbigrad;
+  frarmw = frictionwasherarmwidth;
+  frarmpawlr = hublwidth;
+  frarmpawlpush = slop*4 + frictionwasherextrapush;
+  for (ang=[0,180]) rotate([0,0,ang]) {
+    translate([washerrad-1, -frarmw/2, 0])
+      cube([frarmr - washerrad + 1, frarmw, washerthick]);
+    intersection(){
+      translate([frarmr - frarmpawlr, -50, 0])
+       cube([frarmpawlr, 100, 50]);
+      rotate([0,90,0])
+       cylinder(h = 50, r = frarmpawlpush, $fn=36);
+    }
+  }
 }
 
 module TowerExtender(){ ////toplevel
@@ -335,3 +367,4 @@ module TowerExtender(){ ////toplevel
 //Axle();
 //AxleWasher();
 //AxlePin();
+//AxleFrictionWasher();