filamentspool: FilamentGuideArm: wip

[reprap-play.git] / filamentspool.scad

diff --git a/filamentspool.scad b/filamentspool.scad
index 825c27a2037cee448540585f02253dee00994c19..30fb27f71f00c2a8f6fc3d37f38400b575a62afa 100644 (file)
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -742,6 +742,90 @@ module FilamentGuideSpacer(){ ////toplevel
 }
 
 
+//----- replacement filament guide arm for TAZ-5 -----
+
+guidearm_armslop = 0.25;
+guidearm_armlenslop = 0.25;
+
+guidearm_hookprotr = 4;
+guidearm_hookprotrflat = 1;
+guidearm_hookslope = 0.3;
+
+guidearm_totallen = 60;
+
+guidearm_screwplatesz = 12;
+guidearm_screwplateth = 4;
+guidearm_screwhole = 4 + 0.5;
+
+guidearm_bendlen = 50;
+guidearm_bendslot = 5;
+
+// calculated
+
+guidearm_armdia = guide_armdia - guidearm_armslop;
+guidearm_armwidth = guide_armwidth - guidearm_armslop;
+guidearm_armcorelen = guide_armcorelen + guidearm_armlenslop;
+
+guidearm_base_z0 = -(guidearm_totallen - guidearm_armcorelen);
+
+guidearm_realbendlen = min(guidearm_bendlen,
+                          guidearm_totallen - guidearm_screwplateth - 0.1);
+
+module FilamentGuideArmShaftPositive(){
+  r = guidearm_armdia/2;
+
+  translate([0,0, guidearm_base_z0+1])
+    cylinder(r=r, h= guidearm_totallen);
+  translate([0,0, guidearm_armcorelen]){
+    hull(){
+      for (ts=[-1,+1]) {
+       translate([ts * guidearm_hookprotr, 0,0])
+         cylinder(r=r, h=guidearm_hookprotrflat);
+      }
+      translate([0,0, guidearm_hookprotr/guidearm_hookslope])
+       cylinder(r=r, h=guidearm_hookprotrflat);
+    }
+  }
+}
+
+module FilamentGuideArmBase(){
+  translate([0,0, guidearm_base_z0]){
+    difference(){
+      translate([0,0, guidearm_screwplateth/2])
+       cube(center=true,
+            [guidearm_armdia + guidearm_screwplatesz*2,
+             guidearm_armwidth,
+             guidearm_screwplateth]);
+      for (ts=[-1,+1]) {
+       translate([ts * (guidearm_armdia/2 + guidearm_screwplatesz/2),
+                  0,
+                  -20])
+         cylinder(r= guidearm_screwhole/2, h=40);
+      }
+    }
+  }
+}
+
+module FilamentGuideArm(){ ///toplevel
+  intersection(){
+    difference(){
+      FilamentGuideArmShaftPositive();
+      translate([-guidearm_bendslot/2,
+                -50,
+                -guidearm_realbendlen + guidearm_armcorelen])
+       cube([guidearm_bendslot,
+             100,
+             guidearm_realbendlen + 100]);
+    }
+    cube(center=true,
+        [guidearm_armdia*2,
+         guidearm_armwidth,
+         guidearm_totallen*3]);
+  }
+  FilamentGuideArmBase();
+}
+
+
 module Demo(){
   translate([-hubeffrad-30,50,0]) Hub();
   ArmEnd();
@@ -761,4 +845,5 @@ module Demo(){
 //StorageArmLeft();
 //StorArmHoleTest();
 //FilamentGuideSpacer();
+//FilamentGuideArm();
 //Demo();