axleaxlefudgebend = 3;
axlepadlen = 1.0;
-prongthick=selsz(5,7);
+armend_length = 120;
+
+prongthick=selsz(5,5);
prongwidth=selsz(5,5);
+prongribwidth=3;
+prongribheight=selsz(0,4);
ratchetstep=15;
ratchettooth=3;
ratchettoothheight=5;
ratchettoothsmoothr=1;
ratchettoothslope=0.75;
overlap=0.5;
-cupwidth=selsz(40,60);
-cupheight=selsz(55,75);
+cupwidth=selsz(40,50);
+cupheight=selsz(55,55);
cupstrong_dx=selsz(0,-10);
ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
-nondove_armbase = 100;
-nondove_armhole_x = 60;
+nondove_armhole_x = 32;
nondove_armhole_hole = 4;
nondove_armhole_support = 7;
nondove_armhole_wall = 4;
nondove_armhole_slop = 0.5;
nondove_armhole_slop_x = 0.5;
+nondove_armbase = nondove_armhole_x + nondove_armhole_hole/2 +
+ nondove_armhole_support;
+echo(nondove_armbase);
+
include <doveclip.scad>
include <cliphook.scad>
include <filamentteeth.scad>
totalheight = channeldepth + armendbasethick;
stalkwidth = prongwidth + prongstalkxwidth;
-module ArmEnd(length=120){ ////toplevel
+module ArmEnd(length=armend_length){ ////toplevel
if (usedove()) {
translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
rotate([0,0,-90])
translate([cupstrong_dx, prongwidth, 0]) {
cube([prongwidth, baselen-prongwidth, prongthick]);
- for (y = [0, .4, .7, 1])
- translate([0, (baselen - prongwidth*2) * y, 0])
+ for (y = [0, .33, .67, 1])
+ translate([0, (baselen - prongwidth) * y, 0])
cube([-cupstrong_dx + 1, prongwidth, prongthick]);
}
if (cupstrong_dx != 0) {
cube([prongwidth*(2.65), prongwidth*4.2, prongthick]);
}
+ translate([0, -0.2, 0])
+ cube([prongribwidth, baselen, prongthick + prongribheight]);
+
+ if (prongribheight > 0) {
+ translate([-prongwidth, baselen, 0])
+ cube([cupheight/2, prongwidth + prongribheight, prongribwidth]);
+ }
+
midrad = cupwidth/2 + prongwidth/2;
propshift = stalklength - overclipdepth - prongthick + propxshift;
FilamentTeeth(fdia=fdia, h=teethh);
}
for (x = [-0.3, -1.3]) {
- translate([cupheight + overclipcupnextgap*x, baselen + prongthick, 0])
+ translate([cupheight + overclipcupnextgap*x, baselen + prongwidth, 0])
rotate([0,0, 12 + fdia])
FilamentTeeth(fdia=fdia, h=teethh);
}