filamentspool: Fix typo in doc comment

[reprap-play.git] / filamentspool.scad

diff --git a/filamentspool.scad b/filamentspool.scad
index 981cf6e195e26e8650060ce454223f306e01cef2..0f2ebd35898f742256fa003e41cafef064f33dfd 100644 (file)
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -1,6 +1,26 @@
 // -*- C -*-
 
-// Filament spool for filament coils as supplied by Faberdashery
+// filamentspool.scad
+// 3D design for filament spools to hold coils as supplied by Faberdashery
+//
+
+//
+// Copyright 2012,2013,2016 Ian Jackson
+//
+// This work is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This work is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this work.  If not, see <http://www.gnu.org/licenses/>
+//
+
 //
 // Each spool is a hub with 3 or 4 arms.  Each arm has a cup for
 // holding the filament.  The effective diameter can be adjusted by
@@ -20,9 +40,9 @@
 //            Hub
 //            ArmEnd x 4
 //            FilamentCup x 4  (or FilamentCupPair x 2)
-//            CupSecuringClup x 4
+//            CupSecuringClip x 4
 //
-//     You will also need  4 x M4 machine screws and nuts
+//     You will also need  4 x M4 machine screws and nuts.
 //
 //   - Light duty 3-armed spool suitable for up to around 30m
 //     of Faberdashery 2.85mm PLA.
@@ -34,7 +54,7 @@
 //           Hub
 //           ArmEnd x 3
 //           FilamentCup x 3  (or FilamentCup + FilamentCupPair)
-//           CupSecuringClup x 3
+//           CupSecuringClip x 3
 //           TowerDoveClipPin x 6
 //
 //     When assembling, insert one TowerDoveClipPin from each side,
@@ -44,6 +64,11 @@
 //     (note that the light duty and heavy duty CupSecuringClips
 //      are slightly different)
 //
+// When mounting either spool on the TAZ-5 spool arm, put the `pointy'
+// end of the hub towards the printer - ie, put put the spool on
+// `backwards'.  This ensures that the spool's arms will clear the
+// printer framework.
+//
 // For the above, I generally used the Cura `Standard' PLA profile.
 //
 //   - Storage arm suitable for screwing to walls, bookshelves,