filamentclip wip teeth

[reprap-play.git] / filamentclip.scad

diff --git a/filamentclip.scad b/filamentclip.scad
index bf8a03043b6e340613d739a9f4295a1832cb5313..8f1855ae1f900816970f67151afe45ee1fd19b80 100644 (file)
--- a/filamentclip.scad
+++ b/filamentclip.scad
@@ -1,2 +1,72 @@
 include <cliphook.scad>
 include <cliphook.scad>

-ClipHook();
+
+rad=12;
+h=3.5;
+w=1.0;
+
+looprad=2.5;
+loopw=w;
+
+//fdia=1.77;
+fdia=3;
+
+d=0.01;
+
+module FilamentClipTeeth(based=1.5, basew=4, teethw=0.6,
+                        stembendd=0.5, stembendl=4, teethxl=1) {
+  gapw = fdia-stembendd*2;
+  teethbigw = gapw + teethw*2;
+
+  translate([-based, -basew/2, 0]) cube([based, basew, h]);
+  difference() {
+    union() {
+      translate([-d, -teethbigw/2, 0])
+       cube([d+stembendl+teethxl, teethbigw, h]);
+//  translate([
+//  stembigw = fdia + stembend
+//  translate([-d, -stemw, 
+      linear_extrude(height=h) {
+       translate([stembendl-fdia/2, 0]) circle(fdia/2+teethw, $fn=30);
+      }
+    }
+    translate([0,0,-1]) {
+      translate([0,-gapw/2])
+       cube([stembendl+teethxl+1, gapw, h+2]);
+      linear_extrude(height=h+2) {
+       translate([stembendl-fdia/2, 0]) circle(fdia/2, $fn=30);
+      }
+    }
+  }
+
+//  for (mirr=[0:1]) {
+//    mirror([0,mirr,0]) {
+//      linear_extrude(height=h) {
+//     translate(0.5, square([
+//      }
+//    }
+//  }
+}
+
+module FilamentClip() {
+  k=1.5;
+  g=0.6;
+
+  rotate([0,0,-45]) {
+    translate([0,rad,0]) {
+      ClipHook(h=h, w=w, g=0.6, k=k, g=g, ye=-1.3);
+      rotate([0,0,180]) ClipHook(h=h, w=w, g=g, k=k, ye=0.8);
+    }
+  }
+
+  linear_extrude(height=h) {
+    assign($fn=80) {
+      FlatArc(0,0, rad-w/2,rad+w/2, 65,379);
+    }
+    assign($fn=30) {
+      FlatArc(0,rad+looprad+w, looprad,looprad+loopw);
+    }
+  }
+}
+
+FilamentClip();
+FilamentClipTeeth();