fairphone-case: reformat a bit (nfc)

[reprap-play.git] / fairphone-case.scad

diff --git a/fairphone-case.scad b/fairphone-case.scad
index b38784c2ee9b46c95db4e6bfcde40bacbefde585..ef3f7c26a42dc0caa81633e19d25ced2f1da02c0 100644 (file)
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -56,6 +56,8 @@ keeper_gap_z_bot = 0.75;
 keeper_gap_x     = 0.25;
 keeper_gap_x_holes = 0.75;
 
+keeper_side = 0; // 0 = lhs; 1 = rhs
+
 case_lip = 1.25;
 
 lid_gap_x = 0.25;
@@ -423,7 +425,7 @@ module Buttons(){
   Flip_rhs(1) SideButton(15.580, +1, 8.9) children(); // power
   Flip_rhs(1) SideButton(48.700, -1, 8.920) children(); // camera
   Flip_rhs(0) SideButton(30.800, +1, 21.96) children(); // volume
-  Flip_rhs(   ) LidButtonishLeg(20, -1) children();
+  Flip_rhs(   ) LidButtonishLeg(14, -1) children();
 //  Flip_rhs(0) LidButtonishLeg(20, +1, 20) children();
 }
 
@@ -519,10 +521,10 @@ module HingeLeverOuterProfile(){
 module HingeLeverInnerProfile(){
   for (c = [hppT, hppB]) {
     hull()
-      for (x=[0,20])
-       translate([x,0])
-         circleat(c, hp_rn);
-       circleat(hppB, hp_rn);
+      for (x=[-20,20])
+       for (y=[0, c[1] - hppM[1]])
+         translate([x,y])
+           circleat(c, hp_rn);
   }
 }
 
@@ -561,7 +563,7 @@ module Case(){ ////toplevel
       CaseBase();
 
       // ledge (fixed keeper)
-      intersection(){
+      Flip_rhs(1-keeper_side) intersection(){
        rotate([90, 0, 0])
          linear_extrude(height = phone_height + phone_cnr_rad * 2)
          KeeperProfile(1);
@@ -570,7 +572,6 @@ module Case(){ ////toplevel
        translate([0,0, -25])
          linear_extrude(height = 50)
          hull()
-         // Flip_rhs() // actually, we only care about the LH
          Flip_bot()
          circleat([+1,-1] * phone_cnr_rad, phone_cnr_rad + case_th_side/2);
       }
@@ -580,7 +581,7 @@ module Case(){ ////toplevel
     }
 
     // slot for keeper
-    Flip_rhs(1)
+    Flip_rhs(keeper_side)
       translate([0, -phone_cnr_rad, 0])
       rotate([90, 0, 0])
       linear_extrude(height = phone_height + phone_cnr_rad * 2)
@@ -606,7 +607,8 @@ module Case(){ ////toplevel
            if ($button_leg_only)
              rotate([-90,90,0])
                translate([phone_width/2, -400, kppe[1]])
-               mirror([$rhsflip,0,0]) cube([400, 800, 50]);
+               mirror([1-abs($rhsflip - keeper_side),0,0])
+               cube([400, 800, 50]);
          }
          translate([0,0, -bppR[0]])
            linear_extrude(height= 20)
@@ -828,11 +830,6 @@ module TestFrameLidPrint(){ ////toplevel
   }
 }
 
-module Keeper(){ ////toplevel
-  Flip_rhs()
-    OneKeeper();
-}
-
 module ButtonPlanForDemo(z, deep, cut){
   translate([0,0,z])
     ButtonPlan(8, deep, cut);