camera_pos_tl = [ 6.450, 12.750 ]; // measured from tl corner
camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
-jack_pos = [ 14.38, 7.96 ];
+jack_pos = [ 13.83, 8.485 ];
jack_dia = 10.64 + .5; // some jack I had lying around
noisecancelmic_pos = [ 19.54, 7.37 ]; // from rhs
bppL = lpp10 + [5,0];
bppK = [ bppL[0], bppN[1] ];
bppJ = [ bppN[0], bppL[1] ];
+bppU = [ bppJ[0], lpp12[1] ];
+bppV = lpp11;
+bppW = lpp10;
// hinge plan
hp_rn = hingescrew_nut_dia/2;
prop_caserecess_buildout_r = -1; // prcp2[0] - epp2o[0];
-prcp1 = [ epp2o[0],
- epp2i[1] - prc_r3 ];
+prcp1 = [ epp2o[0] + prc_r3 + prop_caserecess_behind,
+ epp2i[1] - prc_r3 - prop_recess_under];
// prop recess in lid
module ButtonCoverProfile(){
intersection(){
- polygon([ bppM, bppP, bppO, bppJ, bppL, bppK ]);
+ polygon(concat([ bppM, bppP, bppO, bppJ ],
+ (enable_support ? [ bppU, bppV, bppW ] : []),
+ [ bppL, bppK ]));
hull(){
EdgeProfile();
LidEdgeProfile();
}
module HingeLeverInnerProfile(){
- for (c = [hppT, hppB]) {
- hull()
+ for (s = [-1,+1]) {
+ c = s > 0 ? hppT : hppB;
+ translate(c)
+ mirror([0,0,s>0])
+ rotate(-s * 45)
+ hull()
for (x=[-20,20])
- for (y=[0, c[1] - hppM[1]])
+ for (y=[0, s * 10])
translate([x,y])
- circleat(c, hp_rn);
+ circle(hp_rn);
+ }
+}
+
+module HingeLeverNutProfile(){
+ for (c= [hppB, hppT]) {
+ translate(c)
+ circle($fn=6, r= 0.5 * hingescrew_nut_across / cos(30));
}
}
-module Flip_hinge(){
+module Flip_hinge(doflip=1){
hinge_origin = [0, -(phone_height - hppB[0]), hppB[1]];
translate(hinge_origin)
- rotate([180,0,0])
+ rotate([doflip*180,0,0])
translate(-hinge_origin)
children();
}
$prpp1 = $prpp7 + [1,0] *
// this is approximate, but will do
- (prop_main_th/2 + prop_prop_gap + prcp1[0] - epp4[0]);
+ (prop_main_th/2 + prop_prop_gap + prcp1[0] - cppA[0]);
$prpp3 = $prpp1 +
v1[0] * -$prp_r1 +
v1[1] * ((prcp2[1] - prcp1[1]) - prop_prop_gap);
// prop recess
Flip_rhs(1)
translate([prop_x_pos,0,0])
+ mirror([0,1,0])
rotate([90,0,90])
linextr(-prop_recess_hw, +prop_recess_hw)
- mirror([1,0])
hull(){
for (d=[ [0,0], [0,-1], [+1,-1/prop_caserecess_taper] ])
circleat(prcp1 + 20*d,
// prop recess
translate([prop_x_pos, -prlp10[0], prlp10[1]])
+ mirror([0,1,0])
rotate([90,0,90])
linextr(-prop_recess_hw, +prop_recess_hw)
- mirror([1,0])
hull()
for (pa = prop_angles)
PropProfile(pa, 1,1);
}
module HingeLeverPrint(){ ////toplevel
- rotate([90,0,0])
+ rotate([-90,0,0])
HingeLever();
}
}
}
+module TestTopApertures(){ ////toplevel
+ intersection(){
+ Case();
+ TestSelectFrame();
+ translate([-100, -35, -100])
+ cube([400, 100, 200]);
+ }
+}
+
module TestFrameLidPrint(){ ////toplevel
rotate([0,180,0]) intersection(){
Lid();
color("blue") HingeLidProfile();
color("red") HingeBaseProfile();
color("black") translate([0,0,-2]) HingeLeverOuterProfile();
- color("orange") translate([0,0,-1]) HingeLeverInnerProfile();
+ }
+
+ for (f=[0,1]) {
+ translate([-30, -60 + 30*f]) {
+ translate([0,0,-4]) EdgeProfile();
+ %translate([0,0,-10]) HingeBaseProfile();
+ translate([0,-2] * f * hp_k) {
+ translate([0,0,-4]) LidEdgeProfile();
+ %translate([0,0,-10]) %HingeLidProfile();
+ }
+ translate(+hppB) rotate([0,0,180*f]) translate(-hppB) {
+ translate([0,0,-2]) color("black") HingeLeverOuterProfile();
+ translate([0,0,0]) color("red") difference(){
+ HingeLeverOuterProfile();
+ HingeLeverInnerProfile();
+ }
+ translate([0,0,3]) color("yellow") HingeLeverNutProfile();
+ }
+ }
}
translate([20,-30]) {