fairphone-case: fix hex22 (from v11)

[reprap-play.git] / fairphone-case.scad

diff --git a/fairphone-case.scad b/fairphone-case.scad
index d1181e673863c45c6c67c46845e24f853da5632e..64fe13d8e308f6b13ff4ee8eb74ec15ff56713b0 100644 (file)
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -96,6 +96,7 @@ rearspeaker_gap    = [ 1.0, 1.0 ]; // each side
 catch_len = 7.5;
 catch_width = 15;
 catch_thickness = 1.0;
+catch_side_gap = 0.75; // each side
 
 catch_depth = 1.25;
 catch_height = 0.35;
@@ -187,7 +188,7 @@ hex20 = max(epp2o[0],
            phone_cnr_rad,
            kppd[0] + hingescrew_head_th + keeper_gap_x_holes);
 hex21 = hex20 + hingescrew_portion_len;
-hex22 = hex21 - hinge_x_gap;
+hex22 = hex21 + hinge_x_gap;
 hex23 = hex22 + hingescrew_portion_len;
 hex24 = hex20 + hingescrew_shaft_len + hinge_x_postscrew_gap;
 echo(hex20, hex21, hex22, hex23, hex24);
@@ -541,6 +542,13 @@ module HingePortion(x0,x1){
     children(0);
 }
 
+module CatchPortion(width){
+  translate([phone_width/2, 0,0])
+    rotate([90,0,-90])
+    linextr(-width/2, width/2)
+    children(0);
+}
+
 module CaseBase(){
   AroundEdges(epp3[1], case_th_bottom, 1)
     EdgeProfile();
@@ -624,6 +632,10 @@ module Case(){ ////toplevel
 
     // screw holes in the hinge arms
     HingeScrews();
+
+    // catch striker
+    CatchPortion(catch_width + catch_side_gap*2)
+      CatchCutProfile();
   }
 }
 
@@ -649,6 +661,10 @@ module Lid(){ ////toplevel
 
       // hinge arms
       HingePortion(hex20, hex21) HingeLidProfile();
+
+      // catch
+      CatchPortion(catch_width)
+       CatchCatchProfile();
     }
     Struts(lpp10[0] + strut_min_at_end, lpp13[1], -case_th_lid);