// -*- C -*-
-phone_height = 146.5;
-phone_width = 76.75;
+phone = [ 145.0, 75.0 ];
+
+bumper = [ 0.250, 0.250 ];
+// ^ One side. Overall size is increased by twice this.
+// If no bumpers, is the gap around the phone.
phone_cnr_rad = 6.0;
phone_backside_slope_inner = 1.5; // larger means shallower
phone_backside_slope_outer = 1.0; // larger means shallower
-camera_pos_tl = [ 7.0, 13.0 ]; // measured from tl corner
-camera_pos_br = [ 22.85,37.85]; // tl/br as seen from back
+camera_pos_tl = [ 6.450, 12.750 ]; // measured from tl corner
+camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
case_th_bottom = 2.5;
case_th_lid = 2.5;
// ---------- calculated ----------
+phone_height = (phone + bumper*2)[0];
+phone_width = (phone + bumper*2)[1];
+
+echo(camera_pos_tl + bumper,
+ camera_pos_br + bumper);
+
// ----- could be changed -----
lid_buttoncover_gap = lid_gap_x;
lid_buttoncover_overlap = case_th_lip + keeper_gap_z_top;
lpp12 = [ epp4[0] + lp_r12, lpp11[1] ];
lpp13 = [ lpp12[0], lpp12[1] + lp_r12 ];
-echo(lpp13 - lpp10);
-
// button profile
bppM = epp4 + [0,5];
bppN = [ 0.5 * (epp0[0] + epp4[0]), bppM[1] ];
}
module Buttons(){
- CaseBase_rhsflip([1]) SideButton(20.6, 8.8) children(); // power
+ CaseBase_rhsflip([1]) SideButton(19.650, 8.8) children(); // power
}
module Struts(x_start, z_min, th){
mirror([0, 0, 1])
linear_extrude(height = 20)
mirror([0, 1, 0])
+ translate(bumper)
rectfromto(camera_pos_tl, camera_pos_br);
// struts (invisible, because they're buried in the case)
rotate([90,0,90])
translate([0,0,-10])
linear_extrude(height= 20)
- ButtonPlan($button_l, 0,0);
+ ButtonPlan($button_l, 1,0);
rotate([90,0,0])
translate([0,0,-100])
linear_extrude(height= 200)
linear_extrude(height = 50)
mirror([0, 1, 0])
rectfromto([-20, -20],
- camera_pos_br + [ 5, 5 ]);
+ camera_pos_br + bumper + [ 5, 5 ]);
}
module TestCamera(){ ////toplevel
rotate([180,0,0]) TestLidByCamera();
}
+module DemoByCamera(){ ////toplevel
+ color("blue") TestLidByCamera();
+ color("red") TestCamera();
+}
+
module OneKeeper(){ ////toplevel
translate([0, -phone_cnr_rad, 0])
rotate([90, 0, 0])