fairphone-case: fix CaseAperture (nfc)

[reprap-play.git] / fairphone-case.scad

diff --git a/fairphone-case.scad b/fairphone-case.scad
index eb9e445d65e39b1ecbe5e7d8ca936034ff4df6c3..238abba51865f76367ccbe737b284ce737b53890 100644 (file)
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -18,6 +18,11 @@ phone_backside_slope_outer = 1.0; // larger means shallower
 camera_pos_tl = [  6.450, 12.750 ]; // measured from tl corner
 camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
 
+jack_pos = [ 13.92, 7.96 ];
+jack_dia = 9.1 + .5; // some jack I had lying around
+
+noisecancelmic_pos = [ 19.54, 7.37 ];   // from rhs
+
 case_th_bottom = 2.5;
 case_th_lid = 2.5;
 case_th_side = 2;
@@ -49,6 +54,7 @@ $fa = 5;
 $fs = 0.1;
 
 button_l_fudge = 4.4;
+buttonishleg_default_l_is_fudge = 10;
 
 strut_min_at_end = 1.5;
 
@@ -57,6 +63,8 @@ strut_min_at_end = 1.5;
 phone_width =  (phone + bumper*2)[0];
 phone_height = (phone + bumper*2)[1];
 
+inside_br = [phone_width, -phone_height];
+
 //echo(camera_pos_tl + bumper,
 //     camera_pos_br + bumper);
 
@@ -203,9 +211,9 @@ module ButtonPlan(l, deep, cut){
 }
 
 module CaseBase_rhsflip(yn=[0,1]) {
-  for (rhs=yn) {
+  for ($rhsflip=yn) {
     translate([phone_width/2, 0, 0])
-      mirror([rhs,0,0])
+      mirror([$rhsflip,0,0])
       translate([-phone_width/2, 0, 0])
       children();
   }
@@ -258,6 +266,16 @@ module AroundEdges(fill_zstart, fill_th, fill_downwards=0){
               [phone_width, -phone_height] + [-1,+1] * phone_cnr_rad);
 }
 
+module CaseAperture(pos, dia, $fn) {
+  theta = 180/$fn;
+  translate([ pos[0] + bumper[0],
+             -epp2i[0],
+             -pos[1] ])
+    rotate([-90, theta, 0])
+    cylinder(r = dia/2 / cos(theta),
+            h = 60);
+}
+
 module SideButton(y, y_ref_sign, l){
   // y_ref_sign:
   //   +1  measured from top    of actual phone to top    of button
@@ -272,10 +290,17 @@ module SideButton(y, y_ref_sign, l){
     children();
 }
 
+module LidButtonishLeg(y, y_ref_sign, l=buttonishleg_default_l_is_fudge) {
+  $button_leg_only = true;
+  SideButton(y, y_ref_sign, l) children();
+}
+
 module Buttons(){
   CaseBase_rhsflip([1]) SideButton(15.580, +1, 8.9) children(); // power
   CaseBase_rhsflip([1]) SideButton(48.700, -1, 8.920) children(); // camera
   CaseBase_rhsflip([0]) SideButton(30.800, +1, 21.96) children(); // volume
+  CaseBase_rhsflip(   ) LidButtonishLeg(20, -1) children();
+//  CaseBase_rhsflip([0]) LidButtonishLeg(20, +1, 20) children();
 }
 
 module Struts(x_start, z_min, th){
@@ -347,14 +372,23 @@ module Case(){ ////toplevel
     Buttons(){
       mirror([1,0,0])
        rotate([90,0,90]) {
-         translate([0,0,-10])
-           linear_extrude(height= 20)
-           ButtonPlan($button_l, 0,1);
+         intersection(){
+           translate([0,0,-10])
+             linear_extrude(height= 20)
+             ButtonPlan($button_l, 0,1);
+           if ($button_leg_only)
+             rotate([-90,90,0])
+               translate([phone_width/2, -400, kppe[1]])
+               mirror([$rhsflip,0,0]) cube([400, 800, 50]);
+         }
          translate([0,0, -bppR[0]])
            linear_extrude(height= 20)
            ButtonPlan($button_l, 1,1);
         }
     }
+
+    // apertures along top edge
+    CaseAperture(jack_pos, jack_dia, 8);
   }
 }
 
@@ -404,7 +438,10 @@ module TestWidth(){ ////toplevel
 }
 
 module TestLidWidthPrint(){ ////toplevel
-  rotate([0,180.0]) TestLidWidth();
+  rotate([0,180.0]) intersection(){
+    Lid();
+    TestSelectWidth();
+  }
 }
 
 module TestSelectCamera(){
@@ -451,6 +488,39 @@ module OneKeeperPrint(){ ////toplevel
     OneKeeper();
 }
 
+module LidPrint(){ ////toplevel
+  rotate([0,180,0])
+    Lid();
+}
+
+module TestSelectFrame(){
+  include = [1,-1] * (epp2i[0] + 4);
+
+  difference(){
+    cube(1000, center=true);
+    translate([0,0, -100])
+      linear_extrude(height=200)
+      rectfromto(include,  inside_br - include);
+  }
+}
+
+module TestFrameCase(){ ////toplevel
+  intersection(){
+    Case();
+    union(){
+      TestSelectFrame();
+      TestSelectCamera();
+    }
+  }
+}
+
+module TestFrameLidPrint(){ ////toplevel
+  rotate([0,0,180]) intersection(){
+    Lid();
+    TestSelectFrame();
+  }
+}
+
 module Keeper(){ ////toplevel
   CaseBase_rhsflip()
     OneKeeper();