camera_pos_tl = [ 6.450, 12.750 ]; // measured from tl corner
camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
+jack_pos = [ 13.92, 7.96 ];
+jack_dia = 9.1 + .5; // some jack I had lying around
+
+noisecancelmic_pos = [ 19.54, 7.37 ]; // from rhs
+
case_th_bottom = 2.5;
case_th_lid = 2.5;
case_th_side = 2;
$fs = 0.1;
button_l_fudge = 4.4;
+buttonishleg_default_l_is_fudge = 10;
strut_min_at_end = 1.5;
phone_width = (phone + bumper*2)[0];
phone_height = (phone + bumper*2)[1];
+inside_br = [phone_width, -phone_height];
+
//echo(camera_pos_tl + bumper,
// camera_pos_br + bumper);
[phone_width, -phone_height] + [-1,+1] * phone_cnr_rad);
}
+module CaseAperture(pos, dia, $fn) {
+ theta = 180/$fn;
+ translate([ pos[0] + bumper[0],
+ -epp2i[0],
+ -pos[1] ])
+ rotate([-90, theta, 0])
+ cylinder(r = dia/2 / cos(theta),
+ h = 60);
+}
+
module SideButton(y, y_ref_sign, l){
// y_ref_sign:
// +1 measured from top of actual phone to top of button
children();
}
-module LidButtonishLeg(y, y_ref_sign) {
+module LidButtonishLeg(y, y_ref_sign, l=buttonishleg_default_l_is_fudge) {
$button_leg_only = true;
- SideButton(y, y_ref_sign, 10) children();
+ SideButton(y, y_ref_sign, l) children();
}
module Buttons(){
CaseBase_rhsflip([1]) SideButton(48.700, -1, 8.920) children(); // camera
CaseBase_rhsflip([0]) SideButton(30.800, +1, 21.96) children(); // volume
CaseBase_rhsflip( ) LidButtonishLeg(20, -1) children();
+// CaseBase_rhsflip([0]) LidButtonishLeg(20, +1, 20) children();
}
module Struts(x_start, z_min, th){
ButtonPlan($button_l, 1,1);
}
}
+
+ // apertures along top edge
+ CaseAperture(jack_pos, jack_dia, 8);
}
}
}
module TestLidWidthPrint(){ ////toplevel
- rotate([0,180.0]) TestLidWidth();
+ rotate([0,180.0]) intersection(){
+ Lid();
+ TestSelectWidth();
+ }
}
module TestSelectCamera(){
OneKeeper();
}
+module LidPrint(){ ////toplevel
+ rotate([0,180,0])
+ Lid();
+}
+
+module TestSelectFrame(){
+ include = [1,-1] * (epp2i[0] + 4);
+
+ difference(){
+ cube(1000, center=true);
+ translate([0,0, -100])
+ linear_extrude(height=200)
+ rectfromto(include, inside_br - include);
+ }
+}
+
+module TestFrameCase(){ ////toplevel
+ intersection(){
+ Case();
+ union(){
+ TestSelectFrame();
+ TestSelectCamera();
+ }
+ }
+}
+
+module TestFrameLidPrint(){ ////toplevel
+ rotate([0,0,180]) intersection(){
+ Lid();
+ TestSelectFrame();
+ }
+}
+
module Keeper(){ ////toplevel
CaseBase_rhsflip()
OneKeeper();