distort-stl: debugging

[reprap-play.git] / earring-stand.scad

diff --git a/earring-stand.scad b/earring-stand.scad
index 1d4ee2f80a11e6461f364bce8406ab57277cdb3d..85c28a877107edf7984bf6fe4bfd7ff8abd7a011 100644 (file)
--- a/earring-stand.scad
+++ b/earring-stand.scad
@@ -5,12 +5,19 @@ include <commitid.scad>
 front_height = 80;
 front_width = 120;
 front_setback = 30;
-front_thick = 2;
+front_thick = 2.4;
+
+front_hex_stride = 12.5;
+front_hex_dia = 9.5;
+
+front_hex_y_fudge = -0.65;
+
+front_surround_lr =3;
 
 back_thick = 3;
 back_pillarw = 6;
 
-base_thick = 2;
+base_thick = 2.4;
 
 eclip_inner_rad = 2.5;
 eclip_gap_rad = 0.1;
@@ -225,15 +232,53 @@ module Base(){
   }
   translate([xmin,
             0,
-            -eclip_base_offset - thicks[0]])
-    cube([xmax - xmin,
-         front_width,
+            -eclip_base_offset - thicks[0]]){
+    difference(){
+      cube([xmax - xmin,
+           front_width,
          thicks[0]]);
+      translate([xmax-xmin, front_width]/2)
+       rotate([0,0,270])
+       Commitid_Full16_M();
+    }
+  }
 }
 
 module FrontPattern(){
-  square([front_width,
-         front_height - eclip_wall_offset + thicks[1]]);
+  totalh = front_height - eclip_wall_offset + thicks[1];
+
+  ystride = front_hex_stride;
+  xstride = front_hex_stride * cos(30) * 2;
+
+  difference(){
+    square([front_width, totalh]);
+    translate([ front_surround_lr,
+               eclip_recept_height ])
+      square([ front_width - front_surround_lr*2,
+              totalh - eclip_recept_height*2
+              ]);
+  }
+    
+  difference(){
+    square([front_width, totalh]);
+    for (xi=[ -5 : 5 ]) {
+      translate([front_width/2 +
+                xi * xstride,
+                0]) {
+       for (yi=[ 0 : 10 ]) {
+         //echo(yi);
+         translate([0, yi * ystride +
+                    front_hex_dia*front_hex_y_fudge]) {
+           for (dv=[ [0,0],
+                     [-xstride/2, -ystride/2]
+                     ])
+             translate(dv)
+               circle(r= front_hex_dia/2, $fn=6);
+         }
+       }
+      }
+    }
+  }
 }
 
 module Front(){
@@ -271,7 +316,19 @@ module Back(){
   }
 }
 
-module Demo(){
+module BackPrint(){ ////toplevel
+  rotate([0,-90,0]) Back();
+}
+
+module FrontPrint(){ ////toplevel
+  rotate([0, 90+beta, 0]) Front();
+}
+
+module BasePrint(){ ////toplevel
+  Base();
+}
+
+module Demo(){ ////toplevel
   color("red") Base();
   color("blue") Front();
   color("black") Back();
@@ -282,4 +339,7 @@ module Demo(){
 //TestProtr();
 //TestRAProtr();
 //Sketch();
-Demo();
+//Demo();
+//BackPrint();
+//FrontPrint();
+//BasePrint();