poster-tube-lid: LimitForHandling: central part

[reprap-play.git] / bike-lipo-box.scad

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index e5281cedf9a24fdac8571fad5043ff258c345d4f..edd37010cdfd9ac36149516b4d99796deace7ec8 100644 (file)
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -17,21 +17,32 @@ s1930_recess = 3;
 s1930_around = 3;
 s1930_behind = 3;
 
+jdae12pa_rad = 12 / 2 + 0.5;
+jdae12pa_rad_outer = 19 / 2 + 0.5; // head of an "M12 bolt"
+
 totx_inner = 180;
 toty_outer = 95;
-totz_inner = 28.0;
+totz_inner = 27.0;
 
 wallthick = 2.5;
 
 cabledia = 8.7;
 
 strap_w = 5 + 1;
-strap_th = 4;
+strap_th = 4 + 1;
 strap_pillar = 3;
 strap_pillard = 5;
 strap_over = 2;
 
-strap_every = 30;
+lipokeeper_w = 10;
+lipokeeper_h = 8;
+lipokeeper_d_min = 2;
+lipokeeper_slope = 0.75;
+lipokeeper_end_h = 12;
+lipokeeper_end_d_min = 15;
+
+straps_at_box = [45, 95, 125, 160];
+straps_every = 30;
 
 // calculated
 
@@ -151,10 +162,10 @@ module AtGlands(){
   }
 }
 
-module StrapKeepers(){
+module StrapKeepers(at){
   strap_x_tot = strap_w + strap_pillar*2;
 
-  for (sx=[strap_every : strap_every : totx_inner - strap_every]) {
+  for (sx= at) {
     echo("strapkeeper at ",sx);
     translate([sx - strap_x_tot, 0, 0])
       difference(){
@@ -166,17 +177,22 @@ module StrapKeepers(){
   }
 }
 
+chargingconn_x = pxp6012_rad_outer + 1 + $sealingbox_cnrrad;
+switch_x = chargingconn_x + pxp6012_rad_outer
+  + s1930_y_outer/2 + s1930_around;
+
+module AtSealingBox(){
+  rotate([90,0,0])
+    translate([-wallthick,-wallthick, -toty_inner])
+    children();
+}
+
 module Box(){ ////toplevel
   $sealingbox_sz = sb_box_sz;
 
-  chargingconn_x = pxp6012_rad_outer + 1 + $sealingbox_cnrrad;
-  switch_x = chargingconn_x + pxp6012_rad_outer
-    + s1930_y_outer/2 + s1930_around;
-
   difference(){
     union(){
-      rotate([90,0,0])
-       translate([-wallthick,-wallthick, -toty_inner])
+      AtSealingBox()
        SealingBox_RectBox();
 
       translate([switch_x, toty_inner, totz_inner/2])
@@ -184,13 +200,28 @@ module Box(){ ////toplevel
        S1930_Positive();
 
       // keepers for lipo
-      for (kx= [ 40, 80, 120 ]) {
-       translate([kx, 40, -1])
-         cube([10, 5, 8 +1]);
+      for (keepers= [[ 35, lipokeeper_d_min,     lipokeeper_h,
+                      [ 40, 80, 120, 150 ] ],
+                    [ 10, lipokeeper_end_d_min, lipokeeper_end_h,
+                      [ 25 ] ]
+                    // each entry: [ y, d_min, h, [ x, ...] ]
+                    ])
+       for (kx= keepers[3]) {
+         translate([kx, keepers[0], -1])
+           hull(){
+             cube([lipokeeper_w, keepers[1], keepers[2] +1]);
+             cube([lipokeeper_w,
+                   keepers[1] + keepers[2] / lipokeeper_slope,
+                   1]);
+           }
       }
 
       AtGlands()
        GlandPositive(cabledia);
+
+      translate([0, toty_inner+wallthick, -wallthick])
+       rotate([180, 0,0])
+       StrapKeepers(straps_at_box);
     }
 
     // charging connector
@@ -199,6 +230,13 @@ module Box(){ ////toplevel
               10])
       cylinder(r= pxp6012_rad, h= totz_outer);
 
+    // vent connector
+    translate([chargingconn_x,
+              toty_inner - (pxp6012_rad_outer*2 + 5 + 15 +
+                            jdae12pa_rad_outer),
+              10])
+      cylinder(r= jdae12pa_rad, h= totz_outer);
+
     translate([switch_x, toty_inner, totz_inner/2])
       rotate([90,0,90])
       S1930_Negative();
@@ -206,19 +244,51 @@ module Box(){ ////toplevel
     AtGlands()
       GlandNegative(cabledia);
 
-    translate($sealingbox_cnrrad * [1,1,0] +
-             [0, toty_inner/2, -wallthick])
+    translate(-$sealingbox_cnrrad * [1,1,0] +
+             [totx_inner, toty_inner/2, -wallthick])
+      rotate([0,0,180])
+      scale([2,2,1])
       Commitid_Full16_M();
   }
 }
 
 module BoxPrint(){ ////toplevel
-  rotate([-90,0,0])
+  rotate([-90,0,-90])
     Box();
 }
 
+module Lid(){ ////toplevel
+  $sealingbox_sz = sb_box_sz;
+  difference(){
+    union(){
+      AtSealingBox()
+       SealingBox_RectLid();
+      translate([0, -wallthick, -SealingBox_lidbigger()])
+       mirror([0,0,1])
+       StrapKeepers([ straps_every : straps_every
+                      : totx_inner-straps_every ]);
+    }
+
+    translate($sealingbox_cnrrad * [1,0,1])
+      rotate([90,0,0])
+      scale([1.5, 1.5, 1])
+      Commitid_Small16_M();
+  }
+}
+
+module LidPrint(){ ////toplevel
+  rotate([90,0,-90])
+    Lid();
+}
+
+module Demo(){ ////toplevel
+  color("blue") Box();
+  color("red") Lid();
+}
+
 //TestWall();
 //ProfileDemos();
 //TestSealBox();
 //TestSealLid();
 //FArcSegment_mask(350);
+//StrapKeepers();