bike-lipo-box: use keepers for lipo as it takes the whole z space

[reprap-play.git] / bike-lipo-box.scad

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index c7fc125f06e9780ce65507ebf92f04abc5850cf9..e9c8253490a3b7a74b15305af18d1170ba5727aa 100644 (file)
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -18,7 +18,7 @@ s1930_behind = 3;
 
 totx_inner = 180;
 toty_outer = 95;
-totz_outer = 31;
+totz_inner = 28.0;
 
 wallthick = 2.5;
 
@@ -32,7 +32,7 @@ strap_over = 2;
 
 totx_outer = totx_inner + wallthick*2;
 toty_inner = toty_outer - wallthick*2;
-totz_inner = totz_outer - wallthick*2;
+totz_outer = totz_inner + wallthick*2;
 
 sb_box_sz = [totx_outer, totz_outer, toty_inner];
 
@@ -156,17 +156,10 @@ module Box(){ ////toplevel
        rotate([90,0,90])
        S1930_Positive();
 
-      // straps for lipo
-      for (sx= [ 45, 80, 110 ]) {
-       for (sy= [ 10, 40 ]) {
-         translate([sx - strap_x_tot, sy, 0])
-         difference(){
-           translate([0,0, -0.1])
-             cube([strap_x_tot, strap_pillard, strap_th + strap_over]);
-           translate([strap_pillar, -1, 0])
-             cube([strap_w, strap_pillard+2, strap_th]);
-         }
-       }
+      // keepers for lipo
+      for (kx= [ 40, 80, 120 ]) {
+       translate([kx, 40, -1])
+         cube([10, 5, 8 +1]);
       }
     }