// -*- C -*-
include <commitid.scad>
+include <utils.scad>
-pxp6012_rad = 22.5 / 2 + 0.5;
+pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
pxp6012_rad_outer = 32.0 / 2 - 0.5;
s1930_y = 30.2 + 0.2;
s1930_recess = 3;
s1930_around = 3;
+s1930_behind = 3;
+
+wallthick = 2.5;
+
+// origin is at centre on outer face wall
+// outside is towards positive x
+// mounting is vertical
+module S1930_Positive(){
+ d = s1930_recess + s1930_behind;
+ translate([-d/2, 0,0])
+ cube([d,
+ s1930_x_outer + s1930_around,
+ s1930_y_outer + s1930_around], center=true);
+}
+module S1930_Negative(){
+ cube([60, s1930_x, s1930_y],
+ center=true);
+ translate([1, 0,0])
+ cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer],
+ center=true);
+}
-wallthick = 3.0;
-
-module TestWall(){
- sw_ctr = [25, 0, 25];
+module TestWall(){ ////toplevel
+ sw_ctr = [25, wallthick, 25];
rotate([0,0,-90]){
difference(){
difference(){
union(){
cube([50, wallthick, 50]);
- translate(sw_ctr) {
- rotate([90,0,0])
- cube([s1930_x_outer + s1930_around,
- s1930_y_outer + s1930_around,
- s1930_recess*2],
- center=true);
- }
+ translate(sw_ctr)
+ rotate([0,0,90])
+ S1930_Positive();
}
translate(sw_ctr) {
- rotate([90,0,0]) {
- cube([s1930_x, s1930_y, 10], center=true);
- translate([0,0, -5])
- cube([s1930_x_outer, s1930_y_outer, 10], center=true);
- }
+ rotate([0,0,90])
+ S1930_Negative();
}
}
}
-ts_floorceil = 1.5;
-ts_outer = [20,20,20];
-ts_wall = [wallthick,wallthick,ts_floorceil];
-
-seal_h = 3;
-seal_w = 1;
-
-module TestSealSelector(){
- oz = ts_outer[2];
- muchxy = [30,30,0];
- seal_horiz_spare = wallthick - seal_w;
- seal_horiz_flat_outer = seal_horiz_spare/2;
- seal_horiz_flat_inner = seal_horiz_spare - seal_horiz_flat_outer;
-// translate([0,0, oz/2]){
- %translate(-muchxy/2) mirror([0,0,1]) cube(ts_outer + muchxy + [0,0,10]);
- hull(){
- translate([1,1,0] * seal_horiz_flat_outer)
- mirror([0,0,1])
- cube(ts_outer - 2 * [1,1,0] * seal_horiz_flat_outer);
- translate([1,1,0] * seal_horiz_flat_inner + [0, 0, seal_h])
- mirror([0,0,1])
- cube(ts_outer - 2 * [1,1,0] * seal_horiz_flat_inner);
- }
-// }
+$sealingbox_wallthick = wallthick;
+
+floorth = 2.5;
+ceilth = 2.5;
+innertube = 1.0 + 0.2;
+lidoverlap = 1.5;
+lidoverhang = 6;
+tubesealrad = 2.0;
+
+ts_xbox = 30;
+ts_ybox = 25;
+ts_cnrrad = 10;
+ts_zbox = 8;
+
+include <sealing-box.scad>
+
+module TestSealBox(){ ////toplevel
+ TestSealBoxBox();
+ translate(ts_cidoff)
+ Commitid_BestCount([ts_xbox,ts_ybox] - 2*ts_cidoff);
}
-module TestSeal(){
+module TestSealLid(){ ////toplevel
difference(){
- cube(ts_outer);
- translate(ts_wall) cube(ts_outer - ts_wall*2);
+ TestSealBoxLid();
+
+ translate([ts_xbox * .75, ts_ybox/2, 0])
+ cylinder(h=100, r=5);
+
+ translate([-wallthick + ts_cnrrad*.5,
+ ts_cnrrad*.5 - wallthick,
+ ts_zbox + ceilth])
+ Commitid_BestCount([ts_xbox * .75 - 2.5 - (ts_cnrrad*.5),
+ ts_ybox - (ts_cnrrad*.5 - wallthick)*2]);
}
}
+module TestSealLidPrint(){ ////toplevel
+ rotate([180,0,0]) TestSealLid();
+}
+
+module ProfileDemos(){ ////toplevel
+ SealingBox_WallProfile();
+ color("blue") SealingBox_FloorProfile();
+ SealingBox_LidProfile();
+ color("blue") SealingBox_CeilProfile();
+ color("red") translate([-5,0]) square([1,ts_zbox]);
+}
+
//TestWall();
-//TestSeal();
-TestSealSelector();
+//ProfileDemos();
+//TestSealBox();
+//TestSealLid();
+//FArcSegment_mask(350);