include <commitid.scad>
include <utils.scad>
-pxp6012_rad = 22.5 / 2 + 0.5;
+pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
pxp6012_rad_outer = 32.0 / 2 - 0.5;
s1930_y = 30.2 + 0.2;
s1930_recess = 3;
s1930_around = 3;
+s1930_behind = 3;
wallthick = 2.5;
-module TestWall(){
- sw_ctr = [25, 0, 25];
+// origin is at centre on outer face wall
+// outside is towards positive x
+// mounting is vertical
+module S1930_Positive(){
+ d = s1930_recess + s1930_behind;
+ translate([-d/2, 0,0])
+ cube([d,
+ s1930_x_outer + s1930_around,
+ s1930_y_outer + s1930_around], center=true);
+}
+module S1930_Negative(){
+ cube([60, s1930_x, s1930_y],
+ center=true);
+ translate([1, 0,0])
+ cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer],
+ center=true);
+}
+
+module TestWall(){ ////toplevel
+ sw_ctr = [25, wallthick, 25];
rotate([0,0,-90]){
difference(){
difference(){
union(){
cube([50, wallthick, 50]);
- translate(sw_ctr) {
- rotate([90,0,0])
- cube([s1930_x_outer + s1930_around,
- s1930_y_outer + s1930_around,
- s1930_recess*2],
- center=true);
- }
+ translate(sw_ctr)
+ rotate([0,0,90])
+ S1930_Positive();
}
translate(sw_ctr) {
- rotate([90,0,0]) {
- cube([s1930_x, s1930_y, 10], center=true);
- translate([0,0, -5])
- cube([s1930_x_outer, s1930_y_outer, 10], center=true);
- }
+ rotate([0,0,90])
+ S1930_Negative();
}
}
}
ts_xbox = 30;
ts_ybox = 25;
ts_cnrrad = 10;
-ts_zbox = 15;
+ts_zbox = 8;
+
+ts_cidoff = (ts_cnrrad * (1-.7) + wallthick * .8) * [1,1];
m4_dnl Box_Part($1=transl_x,$2=transl_y, $3=rot_z,$4=mirror_xy)
m4_dnl $5=kind, $6=kindargs, $7=profile(profileargsargs))
square([wallthick*2, ceilth]);
}
-module TestSealBox(){
+module TestSealBox(){ ////toplevel
TestSealDoBoxShape(WallProfile(););
hull(){ TestSealDoBoxShape(FloorProfile();); }
+ translate(ts_cidoff)
+ Commitid_BestCount([ts_xbox,ts_ybox] - 2*ts_cidoff);
+}
+
+module TestSealLid(){ ////toplevel
+ difference(){
+ union(){
+ TestSealDoBoxShape(LidProfile(););
+ hull(){ TestSealDoBoxShape(CeilProfile();); }
+ }
+ translate([ts_xbox * .75, ts_ybox/2, 0])
+ cylinder(h=100, r=5);
+
+ translate([-wallthick + ts_cnrrad*.5,
+ ts_cnrrad*.5 - wallthick,
+ ts_zbox + ceilth])
+ Commitid_BestCount([ts_xbox * .75 - 2.5 - (ts_cnrrad*.5),
+ ts_ybox - (ts_cnrrad*.5 - wallthick)*2]);
+ }
+}
+
+module TestSealLidPrint(){ ////toplevel
+ rotate([180,0,0]) TestSealLid();
}
module ProfileDemos(){
}
//TestWall();
+//ProfileDemos();
//TestSealBox();
-ProfileDemos();
+//TestSealLid();
//FArcSegment_mask(350);