bike-lipo-box: Now no longer needs m4 for toplevel (nfc)

[reprap-play.git] / bike-lipo-box.scad.m4

diff --git a/bike-lipo-box.scad.m4 b/bike-lipo-box.scad.m4
deleted file mode 100644 (file)
index ec0b43b..0000000
--- a/bike-lipo-box.scad.m4
+++ /dev/null
@@ -1,121 +0,0 @@
-// -*- C -*-
-
-include <commitid.scad>
-include <utils.scad>
-
-pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
-pxp6012_rad_outer = 32.0 / 2 - 0.5;
-
-s1930_y = 30.2 + 0.2;
-s1930_x =   22 + 0.2;
-s1930_y_outer = 36.4 + 0.2;
-s1930_x_outer = 27.6 + 0.2;
-
-s1930_recess = 3;
-s1930_around = 3;
-s1930_behind = 3;
-
-wallthick = 2.5;
-
-// origin is at centre on outer face wall
-// outside is towards positive x
-// mounting is vertical
-module S1930_Positive(){
-  d = s1930_recess + s1930_behind;
-  translate([-d/2, 0,0])
-    cube([d,
-         s1930_x_outer + s1930_around,
-         s1930_y_outer + s1930_around], center=true);
-}
-module S1930_Negative(){
-  cube([60, s1930_x, s1930_y],
-       center=true);
-  translate([1, 0,0])
-    cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer],
-        center=true);
-}
-
-module TestWall(){ ////toplevel
-  sw_ctr = [25, wallthick, 25];
-
-  rotate([0,0,-90]){
-    difference(){
-      union(){
-       cube([50, wallthick, 42]);
-      }
-
-      translate([30, -1, 20])
-       rotate([-90,0,0])
-       cylinder(r = pxp6012_rad, h=10, $fn=60);
-
-      rotate([90,0,0])
-       Commitid_BestCount([15,40]);
-    }
-  }
-
-  difference(){
-    union(){
-      cube([50, wallthick, 50]);
-      translate(sw_ctr)
-       rotate([0,0,90])
-       S1930_Positive();
-    }
-
-    translate(sw_ctr) {
-      rotate([0,0,90])
-       S1930_Negative();
-    }
-  }    
-}
-
-floorth = 2.5;
-ceilth = 2.5;
-innertube = 1.0 + 0.2;
-lidoverlap = 1.5;
-lidoverhang = 6;
-tubesealrad = 2.0;
-
-ts_xbox = 30;
-ts_ybox = 25;
-ts_cnrrad = 10;
-ts_zbox = 8;
-
-include <sealing-box.scad>
-
-module TestSealBox(){ ////toplevel
-  TestSealBoxBox();
-  translate(ts_cidoff)
-    Commitid_BestCount([ts_xbox,ts_ybox] - 2*ts_cidoff);
-}
-
-module TestSealLid(){ ////toplevel
-  difference(){
-    TestSealBoxLid();
-
-    translate([ts_xbox * .75, ts_ybox/2, 0])
-      cylinder(h=100, r=5);
-    
-    translate([-wallthick + ts_cnrrad*.5,
-              ts_cnrrad*.5 - wallthick,
-              ts_zbox + ceilth])
-      Commitid_BestCount([ts_xbox * .75 - 2.5 - (ts_cnrrad*.5),
-                         ts_ybox - (ts_cnrrad*.5 - wallthick)*2]);
-  }
-}
-
-module TestSealLidPrint(){ ////toplevel
-  rotate([180,0,0]) TestSealLid();
-}
-
-module ProfileDemos(){
-  WallProfile();
-  color("blue") FloorProfile();
-  LidProfile();
-  color("blue") CeilProfile();
-}
-                         
-//TestWall();
-//ProfileDemos();
-//TestSealBox();
-//TestSealLid();
-//FArcSegment_mask(350);