slic3r-config: reduce temperatures, anke-gps-bracket parts seemed to stick to bed...

[reprap-play.git] / anke-gps-bracket.scad

diff --git a/anke-gps-bracket.scad b/anke-gps-bracket.scad
index 37c4c7152b273c00f04ccacb4d6f50b80808e342..efe34a11def9a624c26e98be9dafb70b8310307a 100644 (file)
--- a/anke-gps-bracket.scad
+++ b/anke-gps-bracket.scad
@@ -1,11 +1,27 @@
 // -*- C -*-
 
+// todo
+// nestlecube does not fit
+// nestlecube doveclip at wrong angle
+
+include <doveclip.scad>
+
 // Dimensions of the main GPS body
-outerw = 120 + 2.5;
-outerh =  75 - 0.2;
-outert =  15 - 1.0;
+outerw = 120;
+outerh =  75;
+outert =  15;
 outerbackbevel = 3;
 
+// Dimensions for the holder
+holder_outerw = outerw - 0.0;
+holder_outerh = outerh + 0.0;
+holder_outert = outert + 0.0;
+
+// Dimensions for the model
+model_outerw = outerw + 2.5;
+model_outerh = outerh - 0.2;
+model_outert = outert - 1.0;
+
 // Dimensions of the bezel area round the edges
 bezelw =    11 - 0.5;
 bezelboth = 11 - 0.5;
@@ -41,6 +57,12 @@ nestleddbr = 3.6;
 nestlewallmin = 4;
 nestleceilmin = 4;
 
+// Adjustment for the GPS attitude
+gpsazimuth = 45;
+gpselevation = 40;
+gpsrightwardoffset = 5;
+gpsrearwardoffset = 2;
+
 // Amount of wire protrusion to allow for
 plugwiremoreh = 25;
 
@@ -48,18 +70,31 @@ plugwiremoreh = 25;
 plugslop = 0.5;
 plughstep = 1.5;
 bodylhsrhsslop = 0.5;
+holderhgap = 5;
+holderbezelmore = 2;
 
 // Dimensions for strength only
 screent = 1.0;
 plugstrutw = 4;
-plugstrutt = min(outert, 5);
+plugstrutt = min(model_outert, 5);
+nestledoveclipw = 20;
+holderh = model_outerh * 0.5;
+holderwallt = 2.5;
+holderbackt = 2.8;
+holderdccount = 2;
+holderdoveclipl = 15;
+chassish = 13;
+chassist = 13;
+
+// Consequential values
+holderdcw = DoveClipPairSane_width(holderdccount);
 
 module GpsPlugPlug(slop){
   effhslop = slop - plughstep;
   effplugw = plugw + slop*2;
   effplugh = plugh + effhslop*2;
   translate([plug2lhs-slop, plug2bot-effhslop, -1])
-    cube([effplugw, effplugh, outert+2]);
+    cube([effplugw, effplugh, model_outert+2]);
 }
 
 module GpsBodyOuterBevel(len){
@@ -79,22 +114,24 @@ module GpsBody() { ////toplevel
   difference(){
     union(){
       difference(){
-       cube([outerw, outerh, outert]);
+       cube([model_outerw, model_outerh, model_outert]);
        translate([bezelw, bezelboth, screent])
-         cube([outerw-bezelw*2, outerh-bezelboth-bezeltoph, outert]);
-       translate([outerw-spkr2rhs, spkr2bot, -1])
-         cylinder(r=spkrdia/2, h=outert+2);
+         cube([model_outerw-bezelw*2,
+               model_outerh-bezelboth-bezeltoph,
+               model_outert]);
+       translate([model_outerw-spkr2rhs, spkr2bot, -1])
+         cylinder(r=spkrdia/2, h=model_outert+2);
       }
       translate([plug2lhs+plugw/2, plug2bot+plugh/2, 0])
-       cylinder(r=(plugw+plugh)/2, h=outert);
+       cylinder(r=(plugw+plugh)/2, h=model_outert);
       for (x=[plug2lhs-plugstrutw, plug2lhs+plugw])
        translate([x, 0.1, 0])
-         cube([plugstrutw, outerh-0.2, plugstrutt-0.10]);
+         cube([plugstrutw, model_outerh-0.2, plugstrutt-0.10]);
     }
     GpsPlugPlug(0);
-    for (x=[0,outerw]) translate([x,0,0]) GpsBodyOuterBevel(outerh);
-    for (y=[0,outerh]) translate([0,y,0])
-      rotate([0,0,-90]) GpsBodyOuterBevel(outerw);
+    for (x=[0,model_outerw]) translate([x,0,0]) GpsBodyOuterBevel(model_outerh);
+    for (y=[0,model_outerh]) translate([0,y,0])
+      rotate([0,0,-90]) GpsBodyOuterBevel(model_outerw);
   }
 }
 
@@ -166,7 +203,7 @@ module NestleCubeCutout(ca,cb,d){
   }
 }
 
-module NestleCube(){
+module NestleCube(){ ////toplevel
   midw = nestlew/2;
   midd = min(nestledl,nestledr);
   midddb = max(nestleddbl,nestleddbr);
@@ -206,10 +243,87 @@ module NestleCube(){
       rotate([0,0,90]) NestleCubeCutout(cutd0, cutd1, nestlew);
     }
   }
+
+  translate([gpsrightwardoffset,-gpsrearwardoffset,0])
+    rotate([0,0,gpsazimuth])
+    translate([nestledoveclipw/2,0,DoveClip_depth()-0.5])
+    rotate([0,-90,0])
+    DoveClipPairSane(count=3, h=nestledoveclipw);
+}
+
+module NestleCubePin(){ ////toplevel
+  DoveClipPin(nestledoveclipw*0.4);
+}
+
+module HolderSideL(){ ////toplevel
+  minz = -(bezelw - holderbezelmore) - holderbackt;
+  holdert = holder_outert + holderwallt*2;
+  cylr = 0.5*sqrt(holderdcw*holderdcw + holderdoveclipl*holderdoveclipl);
+  difference(){
+    translate([-holderh,
+              -holderwallt,
+              minz]) {
+      cube([holderh + holderhgap + cylr,
+           holdert,
+           -minz]);
+      translate([holderh + holderhgap + cylr, holdert/2, 0]) {
+       cylinder(r=cylr, h=-minz);
+       rotate([0,0,gpselevation])
+         translate([0, -holderdoveclipl/2, -minz + DoveClip_depth()])
+         rotate([0,-90,-90])
+         DoveClipPairSane(count=holderdccount, h=holderdoveclipl);
+      }
+    }
+    translate([-holderh-1,
+              0,
+              minz + holderbackt])
+      cube([holderh+1,
+           holder_outert,
+           bezelw]);
+  }
+}
+
+module HolderSideR(){ ////toplevel
+  mirror([0,1,0]) HolderSideL();
+}
+
+module ChassisBar(){ ////toplevel
+  dist = holder_outerw - 2*(bezelw - holderbezelmore - DoveClip_depth());
+  cliph = holderdcw;
+  for (mir=[0,1]) {
+    mirror([mir,0,0]) {
+      translate([dist/2, cliph/2, 0])
+       DoveClipPairSane(h=holderdoveclipl, count=holderdccount);
+      translate([-1, 0, 0])
+       cube([dist/2 - DoveClip_depth() + 1.1, chassish, chassist]);
+    }
+  }
+  translate([0, -DoveClip_depth(), 0])
+    rotate([0,0,-90])
+    DoveClipPairSane(h=nestledoveclipw, count=3,
+                    baseextend=chassist/2);
+}
+
+module HolderSidePin(){ ////toplevel
+  DoveClipPin(holderdoveclipl*0.5);
+}
+
+module Pins(){ ///toplevel
+  for (i=[1:4*holderdccount]) {
+    translate([i*10, 0, 0]) HolderSidePin();
+  }
+  for (i=[1:6]) {
+    translate([i*10, 20, 0]) NestleCubePin();
+  }
 }
 
 //GpsPlugT();
 //GpsAssembled();
 //GpsBody();
-
-NestleCube();
+//NestleCube();
+//NestleCubePin();
+//HolderSideL();
+//HolderSideR();
+//HolderSidePin();
+//ChassisBar();
+//Pins();