lock-inframe-bracket: DividePlan on its way

[reprap-play.git] / Makefile

diff --git a/Makefile b/Makefile
index fc2834a29850b7636e75d6515105168e81b8d0e9..ab7972facaa9731ef7ea87296df435e33cd7c36d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -19,6 +19,7 @@
 
 HRR=/home/reprap
 SLIC3R=$(HRR)/Slic3r/bin/slic3r
+M4=m4
 SKEINFORGE=python $(HRR)/reprappro-software.git/skeinforge/skeinforge_application/skeinforge_utilities/skeinforge_craft.py
 
 CWD := $(shell pwd)
@@ -27,22 +28,24 @@ PLAY ?= $(CWD)
 CONFIG=$(PLAY)/slic3r-config.ini
 
 FILAMENTSPOOL_AUTOS = filamentspool filamentspool-lt filamentspool-sm
+FILAMENTSPOOL_AUTOS += filamentspool-storarm3
 
-USING_AUTOS ?= $(FILAMENTSPOOL_AUTOS) xeno-drivebay-bracket dungeonquest-cone anke-gps-bracket cable-hole-trunking-cover anglepoise-neck crossbar-computer-led-mount wardrobe-hook knifeblock pandemic-counter pattress-boxes-3-cover
+USING_AUTOS ?= $(FILAMENTSPOOL_AUTOS) xeno-drivebay-bracket dungeonquest-cone anke-gps-bracket cable-hole-trunking-cover anglepoise-neck crossbar-computer-led-mount wardrobe-hook knifeblock pandemic-counter pattress-boxes-3-cover bike-lipo-box earring-stand bike-stalk-led-mount sewing-table sewing-table-test sewing-table-jig maglite-holder poster-tube-lid fairphone-case
 
 AUTO_TOPLEVELS := $(foreach m,$(USING_AUTOS),$(shell $(PLAY)/toplevel-find $m))
 
-AUTO_INCS = funcs.scad
+AUTO_INCS += funcs.scad sealing-box.scad sewing-table.scad \
+            poster-tube-lid-parametric.scad
 
 default:       autoincs scads
 
-$(shell set -xe; ./commitid.scad.pl >commitid.scad.tmp; cmp commitid.scad.tmp commitid.scad || mv -f commitid.scad.tmp commitid.scad )
+$(shell set -xe; $(PLAY)/commitid.scad.pl >commitid.scad.tmp; cmp commitid.scad.tmp commitid.scad || mv -f commitid.scad.tmp commitid.scad )
 
 autoincs:      $(AUTO_INCS)
 scads:         $(addsuffix .auto.scad, $(AUTO_TOPLEVELS))
 stls:          $(addsuffix .auto.stl, $(AUTO_TOPLEVELS))
 
-%.auto.scads:
+%.auto.scads: %.scad
        $(MAKE) $(addsuffix .auto.scad, $(shell $(PLAY)/toplevel-find $*))
 %.auto.stls:
        $(MAKE) $(addsuffix .auto.stl, $(shell $(PLAY)/toplevel-find $*))
@@ -68,6 +71,7 @@ AUTOBASE=$(shell echo $(1) | perl -pe 's/,\w+\.auto$$//')
 
 %.gcode-sd:    %.gcode
                mount /media/sd
+               rm -f /media/sd/JOB.* /media/sd/job.*
                cp $^ /media/sd/JOB.G
                sleep 0.5
                umount /media/sd
@@ -112,6 +116,15 @@ pandemic-counter-l%.eps: pandemic-counter-letters.fig
                fig2dev -D +$(notdir $*) -L eps <$< >$@.tmp
                @mv -f $@.tmp $@
 
+.PRECIOUS: maglite-holder-torch-curve.eps
+maglite-holder-torch-curve.eps: maglite-holder-torch.fig
+               fig2dev -D +1:70 -L eps <$< >$@.tmp
+               @mv -f $@.tmp $@
+
+maglite-holder-torch-curve.dxf: maglite-holder-torch-curve.eps
+               pstoedit -dt -flat 0.05 -f "dxf: -polyaslines -mm" $< $@
+
+
 PANDEMICQUARANTINES_NUMBERS=1 2
 PANDEMICQUARANTINES_DXFS=$(foreach l,$(PANDEMICQUARANTINES_NUMBERS), \
        pandemic-quarantine-l$l.dxf)
@@ -131,6 +144,9 @@ filamentspool-number-n%.eps:        filamentspool-number.eps.pl
 FILAMENTSPOOL_DXFS=$(foreach n,$(FILAMENTSPOOL_NUMBERS), \
        filamentspool-number-n$n.dxf)
 
+$(addsuffix .auto.stl, $(foreach f,$(FILAMENTSPOOL_AUTOS),$(shell \
+       $(PLAY)/toplevel-find $(PLAY)/$f))): $(FILAMENTSPOOL_DXFS)
+
 filamentspool-numbers filamentspool.stl: $(FILAMENTSPOOL_DXFS)
 
 SCREWRECESSTEST_SIZES= 2 3 4 5 6
@@ -150,10 +166,20 @@ question-question.eps: question-question.fig
                fig2dev -L eps <$< >$@.tmp
                @mv -f $@.tmp $@
 
+sewing-table%.stl: sewing-table-rear-profile.dxf
+sewing-table%.stl: sewing-table-front-profile.dxf
+sewing-table%.stl: sewing-table-end-profile.dxf
+
+sewing-table-%-profile.eps: sewing-table-%-profile.fig
+               fig2dev -L eps -D +40 <$< >$@.tmp
+               @mv -f $@.tmp $@
+
 question-token.stl: question-question.dxf
 
 lemon-stand.stl: lemon-stand.scad
 
+electron-token.stl: electron-token.scad
+
 .PRECIOUS: $(SCREWRECESSTEST_DXFS) $(SCREWRECESSTEST_DXFS) \
        $(foreach s,$(SCREWRECESSTEST_SIZES), \
                screw-recess-test-number-s$s.fig \
@@ -165,6 +191,9 @@ lemon-stand.stl: lemon-stand.scad
 %:             %.pl
                ./$< >$@.tmp && mv -f $@.tmp $@
 
+%:             %.m4
+               $(M4) -P >$@.tmp $< && mv -f $@.tmp $@
+
 .PRECIOUS: %.auto.scad
 %.auto.scad: $(PLAY)/toplevel-make Makefile $(PLAY)/toplevel-find
                @echo ' write $@'