acceleration = 0
bed_size = 140,140
bed_temperature = 85
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 0
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.8
fill_angle = 45
fill_density = 0.4
fill_pattern = rectilinear
first_layer_bed_temperature = 85
first_layer_extrusion_width = 0
first_layer_height = 100%
first_layer_speed = 30%
first_layer_temperature = 230
g0 = 0
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extrusion_width = 0
infill_speed = 60
layer_gcode = 
layer_height = 0.4
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
notes = 
nozzle_diameter = 0.5
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_speed = 30
perimeters = 3
perimeters_extrusion_width = 0
post_process = 
print_center = 70,70
randomize_start = 1
retract_before_travel = 2
retract_length = 4.5
retract_lift = 0
retract_restart_extra = 0.1
retract_speed = 30
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 15
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_speed = 60
solid_layers = 3
start_gcode = G28 ; home all axes
support_material = 0
support_material_angle = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_threshold = 45
support_material_tool = 0
temperature = 230
threads = 2
top_solid_infill_speed = 50
travel_speed = 130
use_relative_e_distances = 0
z_offset = -0.5