; -*- fundamental -*-

; slic3r originally produced this, with these comments, and then we edited:
; layer_height = 0.4
; perimeters = 3
; solid_layers = 3
; fill_density = 0.4
; perimeter_speed = 30
; infill_speed = 60
; travel_speed = 130
; scale = 1
; nozzle_diameter = 0.59
; filament_diameter = 1.77
; extrusion_multiplier = 1
; single wall width = 0.71mm
; first layer single wall width = 0.60mm

M190 S65 ; wait for bed temperature to be reached
M104 S215 ; set temperature
G28 ; home all axes
M109 S215 ; wait for temperature to be reached
G90 ; use absolute coordinates
G21 ; set units to millimeters
G92 E0
M82 ; use absolute distances for extrusion

!zprint=0.4

; "skirt" - prep extruder
!draw 5,5 100,5 101,6 101,7 100,8 5,8

; edge ticks for global motions sizing
!draw 20,10 10,10 10,20
!draw 10,65 10,75
!draw 10,120 10,130 20,130
!draw 65,130 75,130
!draw 120,130 130,130 130,120
!draw 130,75 130,65
!draw 130,20 130,10 120,10
!draw 75,10 65,10

!layer(){

; parallel lines

; original test oblong

!draw 68.498,79.498 \
71.502,79.498 \
71.502,82.502 \
68.498,82.502 \
68.498,79.588 \
*67.899,78.899 \
72.101,78.899 \
72.101,83.101 \
67.899,83.101 \
67.899,78.989 \
*67.300,78.300 \
72.700,78.300 \
72.700,83.700 \
67.300,83.700 \
67.300,78.390 \

!}

!layer()

M104 S210 ; set temperature
M140 S60 ; set bed temperature

!zprint=0.8
!layer()

M83 ; extruder relative
G1 F1000 ;1000mm/min extrusion
G1 E-10; retract
G1 X0 Y0 F10000
G28 X0 Y0
M104 S0 ; turn off temperature
M140 S0 ; turn off bed
M84     ; disable motors